lkml.org 
[lkml]   [2008]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] pci: introduce users of ioremap_pcibar()
On Wed, Oct 01, 2008 at 06:57:11AM -0600, Matthew Wilcox wrote:
> > If they use the iomap interface they shouldn't be using readl at all,
> > they should be using ioread*... It would be a bug otherwise.
>
> That's a viewpoint I've heard several people espouse over the last few
> days, but it's not (entirely) true. Addresses returned from calling
> iomap() on a memory location must be compatible with addresses returned
> from calling ioremap(), so you can use readl() on an iomap address, as
> long as you know that it was a memory address that was iomapped.
>
> if (flags & IORESOURCE_MEM) {
> if (flags & IORESOURCE_CACHEABLE)
> return ioremap(start, len);
> return ioremap_nocache(start, len);
> }
>
> OK, not all architectures use the generic code, but I've been through
> and they all do more or less the above (mn10300 and frv just return the
> address, but their readl() and inl() are identical)
>

I don't recall anyone ever promising that the iomap interfaces would be
usable with legacy accessors. I'd certainly prefer it if we didn't, as
well, as it makes for more explicitly written drivers...

Just because you can use them, doesn't mean you should.

regards, Kyle


\
 
 \ /
  Last update: 2008-10-01 15:09    [W:0.052 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site