[lkml]   [2008]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] DS1WM: decouple host IRQ and INTR active state settings.
On Jan 8, 2008 1:13 AM, Matt Reimer <> wrote:
> On Mon, 2008-01-07 at 15:10 -0800, Andrew Morton wrote:
> > On Sun, 06 Jan 2008 14:46:14 +0100
> > Philipp Zabel <> wrote:
> >
> > > The DS1WM driver incorrectly infers the IAS bit (1-wire interrupt active
> > > high) from IRQ settings. There are devices that have IAS=0 but still need
> > > the IRQ to trigger on a rising edge. With this patch, machines with DS1WM
> > > that need IAS=1 have to set .active_high=1 in the ds1wm_platform_data.
> > But no drivers are converted to set ds1wm_platform_data.active_high. Won't
> > IORESOURCE_IRQ_HIGHEDGE devices be broken by this change?
> Good point; I think you're right. I'd guess the other platforms that use
> this driver are in the tree, but I've been out of the loop
> a while. Philipp, is this the case?

Yes, I think so. I am only aware of four chips that include a DS1WM:
HTC's ASIC3, PASIC2 and PASIC3 and Samsung SAMCOP.
All of those drivers have yet to be submitted.

I will also apply this patch to CVS and fix up the devices that are
affected by this change (aximx30, blueangel, magician, h1900, h4000,
h5400, himalaya, hx4700, sable, universal).
But none of those set IORESOURCE_IRQ_HIGHEDGE (most are just
missing the IORESOURCE_IRQ_LOWEDGE flag). I am not sure about
the status of rx3000 or other devices that might live in other trees.

I'm currently cleaning up the PASIC2/3 driver. After that I'll try to help
cleaning up ASIC3 and finally getting it ready for submission.
A whole load of devices in the tree depend on it.


 \ /
  Last update: 2008-01-08 09:25    [W:0.043 / U:3.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site