lkml.org 
[lkml]   [2008]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] sr: update to follow tray status correctly
From
Date
It's been a while with no status on this one, so I corrected the patch
based on my original input. The attached is what I think is the best
way of doing this (I've replaced the home grown test_unit_ready routine
with the SCSI one and updated some of the sense check conditions).

It seems to work for me.

James

---

diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 57b5263..8f31b41 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -67,8 +67,6 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_WORM);

#define SR_DISKS 256

-#define MAX_RETRIES 3
-#define SR_TIMEOUT (30 * HZ)
#define SR_CAPABILITIES \
(CDC_CLOSE_TRAY|CDC_OPEN_TRAY|CDC_LOCK|CDC_SELECT_SPEED| \
CDC_SELECT_DISC|CDC_MULTI_SESSION|CDC_MCN|CDC_MEDIA_CHANGED| \
diff --git a/drivers/scsi/sr.h b/drivers/scsi/sr.h
index 0d04e28..81fbc0b 100644
--- a/drivers/scsi/sr.h
+++ b/drivers/scsi/sr.h
@@ -20,6 +20,9 @@
#include <linux/genhd.h>
#include <linux/kref.h>

+#define MAX_RETRIES 3
+#define SR_TIMEOUT (30 * HZ)
+
struct scsi_device;

/* The CDROM is fairly slow, so we need a little extra time */
diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c
index e1589f9..d5cebff 100644
--- a/drivers/scsi/sr_ioctl.c
+++ b/drivers/scsi/sr_ioctl.c
@@ -275,18 +275,6 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc)
/* ---------------------------------------------------------------------- */
/* interface to cdrom.c */

-static int test_unit_ready(Scsi_CD *cd)
-{
- struct packet_command cgc;
-
- memset(&cgc, 0, sizeof(struct packet_command));
- cgc.cmd[0] = GPCMD_TEST_UNIT_READY;
- cgc.quiet = 1;
- cgc.data_direction = DMA_NONE;
- cgc.timeout = IOCTL_TIMEOUT;
- return sr_do_ioctl(cd, &cgc);
-}
-
int sr_tray_move(struct cdrom_device_info *cdi, int pos)
{
Scsi_CD *cd = cdi->handle;
@@ -310,14 +298,46 @@ int sr_lock_door(struct cdrom_device_info *cdi, int lock)

int sr_drive_status(struct cdrom_device_info *cdi, int slot)
{
+ struct scsi_cd *cd = cdi->handle;
+ struct scsi_sense_hdr sshdr;
+ struct media_event_desc med;
+
if (CDSL_CURRENT != slot) {
/* we have no changer support */
return -EINVAL;
}
- if (0 == test_unit_ready(cdi->handle))
+ if (0 == scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES,
+ &sshdr))
return CDS_DISC_OK;

- return CDS_TRAY_OPEN;
+ if (!cdrom_get_media_event(cdi, &med)) {
+ if (med.media_present)
+ return CDS_DISC_OK;
+ else if (med.door_open)
+ return CDS_TRAY_OPEN;
+ else
+ return CDS_NO_DISC;
+ }
+
+ /*
+ * 0x04 is format in progress .. but there must be a disc present!
+ */
+ if (sshdr.sense_key == NOT_READY && sshdr.asc == 0x04)
+ return CDS_DISC_OK;
+
+ /*
+ * If not using Mt Fuji extended media tray reports,
+ * just return TRAY_OPEN since ATAPI doesn't provide
+ * any other way to detect this...
+ */
+ if (scsi_sense_valid(&sshdr) &&
+ /* 0x3a is medium not present */
+ sshdr.asc == 0x3a)
+ return CDS_NO_DISC;
+ else
+ return CDS_TRAY_OPEN;
+
+ return CDS_DRIVE_NOT_READY;
}

int sr_disk_status(struct cdrom_device_info *cdi)



\
 
 \ /
  Last update: 2008-01-05 17:43    [W:0.069 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site