lkml.org 
[lkml]   [2008]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.6.24-rc6: possible recursive locking detected
hi,

a few minutes after upgrading from -rc5 to -rc6 I got:

[ 1310.670986] =============================================
[ 1310.671690] [ INFO: possible recursive locking detected ]
[ 1310.672097] 2.6.24-rc6 #1
[ 1310.672421] ---------------------------------------------
[ 1310.672828] FahCore_a0.exe/3692 is trying to acquire lock:
[ 1310.673238] (&q->lock){++..}, at: [<c011544b>] __wake_up+0x1b/0x50
[ 1310.673869]
[ 1310.673870] but task is already holding lock:
[ 1310.674567] (&q->lock){++..}, at: [<c011544b>] __wake_up+0x1b/0x50
[ 1310.675267]
[ 1310.675268] other info that might help us debug this:
[ 1310.675952] 5 locks held by FahCore_a0.exe/3692:
[ 1310.676334] #0: (rcu_read_lock){..--}, at: [<c038b620>] net_rx_action+0x60/0x1b0
[ 1310.677251] #1: (rcu_read_lock){..--}, at: [<c0388d60>] netif_receive_skb+0x100/0x470
[ 1310.677924] #2: (rcu_read_lock){..--}, at: [<c03a7fb2>] ip_local_deliver_finish+0x32/0x210
[ 1310.678460] #3: (clock-AF_INET){-.-?}, at: [<c038164e>] sock_def_readable+0x1e/0x80
[ 1310.679250] #4: (&q->lock){++..}, at: [<c011544b>] __wake_up+0x1b/0x50
[ 1310.680151]
[ 1310.680152] stack backtrace:
[ 1310.680772] Pid: 3692, comm: FahCore_a0.exe Not tainted 2.6.24-rc6 #1
[ 1310.681209] [<c01038aa>] show_trace_log_lvl+0x1a/0x30
[ 1310.681659] [<c0104322>] show_trace+0x12/0x20
[ 1310.682085] [<c0104cba>] dump_stack+0x6a/0x70
[ 1310.682512] [<c0138ec1>] __lock_acquire+0x971/0x10c0
[ 1310.682961] [<c013966e>] lock_acquire+0x5e/0x80
[ 1310.683392] [<c0419b78>] _spin_lock_irqsave+0x38/0x50
[ 1310.683914] [<c011544b>] __wake_up+0x1b/0x50
[ 1310.684337] [<c018e2ba>] ep_poll_safewake+0x9a/0xc0
[ 1310.684822] [<c018f11b>] ep_poll_callback+0x8b/0xe0
[ 1310.685265] [<c0114418>] __wake_up_common+0x48/0x70
[ 1310.685712] [<c0115467>] __wake_up+0x37/0x50
[ 1310.686136] [<c03816aa>] sock_def_readable+0x7a/0x80
[ 1310.686579] [<c0381c2b>] sock_queue_rcv_skb+0xeb/0x150
[ 1310.687028] [<c03c7d99>] udp_queue_rcv_skb+0x139/0x2a0
[ 1310.687554] [<c03c81f1>] __udp4_lib_rcv+0x2f1/0x7e0
[ 1310.687996] [<c03c86f2>] udp_rcv+0x12/0x20
[ 1310.688415] [<c03a80a5>] ip_local_deliver_finish+0x125/0x210
[ 1310.688881] [<c03a84ed>] ip_local_deliver+0x2d/0x90
[ 1310.689323] [<c03a7d6b>] ip_rcv_finish+0xeb/0x300
[ 1310.689760] [<c03a8425>] ip_rcv+0x195/0x230
[ 1310.690182] [<c0388fdc>] netif_receive_skb+0x37c/0x470
[ 1310.690632] [<c038ba39>] process_backlog+0x69/0xc0
[ 1310.691175] [<c038b6f7>] net_rx_action+0x137/0x1b0
[ 1310.691681] [<c011e5c2>] __do_softirq+0x52/0xb0
[ 1310.692006] [<c0104e94>] do_softirq+0x94/0xe0
[ 1310.692301] =======================


This is a single CPU machine, and the box was quite busy due to disk I/O
(load 6-8). The machine continues to run and all is well now. Even the
application mentioned above (FahCore_a0.exe) is running fine
("Folding@Home", cpu bound). The binary is located on an jfs filesystem,
which was also under heavy I/O. Can someone tell me why the backtrace
shows so much net* stuff? There was not much net I/O...

more details and .config: http://nerdbynature.de/bits/2.6.24-rc6

Thanks,
Christian.
--
BOFH excuse #312:

incompatible bit-registration operators


\
 
 \ /
  Last update: 2008-01-04 00:01    [W:0.063 / U:1.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site