lkml.org 
[lkml]   [2008]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 06/22 -v7] handle accurate time keeping over long delays
Handle accurate time even if there's a long delay between
accumulated clock cycles.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
---
arch/powerpc/kernel/time.c | 3 +-
arch/x86/kernel/vsyscall_64.c | 5 ++-
include/asm-x86/vgtod.h | 2 -
include/linux/clocksource.h | 58 ++++++++++++++++++++++++++++++++++++++++--
kernel/time/timekeeping.c | 36 +++++++++++++-------------
5 files changed, 82 insertions(+), 22 deletions(-)

Index: linux-mcount.git/arch/x86/kernel/vsyscall_64.c
===================================================================
--- linux-mcount.git.orig/arch/x86/kernel/vsyscall_64.c 2008-01-25 21:47:06.000000000 -0500
+++ linux-mcount.git/arch/x86/kernel/vsyscall_64.c 2008-01-25 21:47:09.000000000 -0500
@@ -86,6 +86,7 @@ void update_vsyscall(struct timespec *wa
vsyscall_gtod_data.clock.mask = clock->mask;
vsyscall_gtod_data.clock.mult = clock->mult;
vsyscall_gtod_data.clock.shift = clock->shift;
+ vsyscall_gtod_data.clock.cycle_accumulated = clock->cycle_accumulated;
vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec;
vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec;
vsyscall_gtod_data.wall_to_monotonic = wall_to_monotonic;
@@ -121,7 +122,7 @@ static __always_inline long time_syscall

static __always_inline void do_vgettimeofday(struct timeval * tv)
{
- cycle_t now, base, mask, cycle_delta;
+ cycle_t now, base, accumulated, mask, cycle_delta;
unsigned seq;
unsigned long mult, shift, nsec;
cycle_t (*vread)(void);
@@ -135,6 +136,7 @@ static __always_inline void do_vgettimeo
}
now = vread();
base = __vsyscall_gtod_data.clock.cycle_last;
+ accumulated = __vsyscall_gtod_data.clock.cycle_accumulated;
mask = __vsyscall_gtod_data.clock.mask;
mult = __vsyscall_gtod_data.clock.mult;
shift = __vsyscall_gtod_data.clock.shift;
@@ -145,6 +147,7 @@ static __always_inline void do_vgettimeo

/* calculate interval: */
cycle_delta = (now - base) & mask;
+ cycle_delta += accumulated;
/* convert to nsecs: */
nsec += (cycle_delta * mult) >> shift;

Index: linux-mcount.git/include/asm-x86/vgtod.h
===================================================================
--- linux-mcount.git.orig/include/asm-x86/vgtod.h 2008-01-25 21:46:50.000000000 -0500
+++ linux-mcount.git/include/asm-x86/vgtod.h 2008-01-25 21:47:09.000000000 -0500
@@ -15,7 +15,7 @@ struct vsyscall_gtod_data {
struct timezone sys_tz;
struct { /* extract of a clocksource struct */
cycle_t (*vread)(void);
- cycle_t cycle_last;
+ cycle_t cycle_last, cycle_accumulated;
cycle_t mask;
u32 mult;
u32 shift;
Index: linux-mcount.git/include/linux/clocksource.h
===================================================================
--- linux-mcount.git.orig/include/linux/clocksource.h 2008-01-25 21:46:50.000000000 -0500
+++ linux-mcount.git/include/linux/clocksource.h 2008-01-25 21:47:09.000000000 -0500
@@ -50,8 +50,12 @@ struct clocksource;
* @flags: flags describing special properties
* @vread: vsyscall based read
* @resume: resume function for the clocksource, if necessary
+ * @cycle_last: Used internally by timekeeping core, please ignore.
+ * @cycle_accumulated: Used internally by timekeeping core, please ignore.
* @cycle_interval: Used internally by timekeeping core, please ignore.
* @xtime_interval: Used internally by timekeeping core, please ignore.
+ * @xtime_nsec: Used internally by timekeeping core, please ignore.
+ * @error: Used internally by timekeeping core, please ignore.
*/
struct clocksource {
/*
@@ -82,7 +86,10 @@ struct clocksource {
* Keep it in a different cache line to dirty no
* more than one cache line.
*/
- cycle_t cycle_last ____cacheline_aligned_in_smp;
+ struct {
+ cycle_t cycle_last, cycle_accumulated;
+ } ____cacheline_aligned_in_smp;
+
u64 xtime_nsec;
s64 error;

@@ -168,11 +175,44 @@ static inline cycle_t clocksource_read(s
}

/**
+ * clocksource_get_cycles: - Access the clocksource's accumulated cycle value
+ * @cs: pointer to clocksource being read
+ * @now: current cycle value
+ *
+ * Uses the clocksource to return the current cycle_t value.
+ * NOTE!!!: This is different from clocksource_read, because it
+ * returns the accumulated cycle value! Must hold xtime lock!
+ */
+static inline cycle_t
+clocksource_get_cycles(struct clocksource *cs, cycle_t now)
+{
+ cycle_t offset = (now - cs->cycle_last) & cs->mask;
+ offset += cs->cycle_accumulated;
+ return offset;
+}
+
+/**
+ * clocksource_accumulate: - Accumulates clocksource cycles
+ * @cs: pointer to clocksource being read
+ * @now: current cycle value
+ *
+ * Used to avoids clocksource hardware overflow by periodically
+ * accumulating the current cycle delta. Must hold xtime write lock!
+ */
+static inline void clocksource_accumulate(struct clocksource *cs, cycle_t now)
+{
+ cycle_t offset = (now - cs->cycle_last) & cs->mask;
+ cs->cycle_last = now;
+ cs->cycle_accumulated += offset;
+}
+
+/**
* cyc2ns - converts clocksource cycles to nanoseconds
* @cs: Pointer to clocksource
* @cycles: Cycles
*
* Uses the clocksource and ntp ajdustment to convert cycle_ts to nanoseconds.
+ * Must hold xtime lock!
*
* XXX - This could use some mult_lxl_ll() asm optimization
*/
@@ -184,13 +224,27 @@ static inline s64 cyc2ns(struct clocksou
}

/**
+ * ns2cyc - converts nanoseconds to clocksource cycles
+ * @cs: Pointer to clocksource
+ * @nsecs: Nanoseconds
+ */
+static inline cycle_t ns2cyc(struct clocksource *cs, u64 nsecs)
+{
+ cycle_t ret = nsecs << cs->shift;
+
+ do_div(ret, cs->mult + 1);
+
+ return ret;
+}
+
+/**
* clocksource_calculate_interval - Calculates a clocksource interval struct
*
* @c: Pointer to clocksource.
* @length_nsec: Desired interval length in nanoseconds.
*
* Calculates a fixed cycle/nsec interval for a given clocksource/adjustment
- * pair and interval request.
+ * pair and interval request. Must hold xtime_lock!
*
* Unless you're the timekeeping code, you should not be using this!
*/
Index: linux-mcount.git/kernel/time/timekeeping.c
===================================================================
--- linux-mcount.git.orig/kernel/time/timekeeping.c 2008-01-25 21:46:50.000000000 -0500
+++ linux-mcount.git/kernel/time/timekeeping.c 2008-01-25 21:47:09.000000000 -0500
@@ -66,16 +66,10 @@ static struct clocksource *clock; /* poi
*/
static inline s64 __get_nsec_offset(void)
{
- cycle_t cycle_now, cycle_delta;
+ cycle_t cycle_delta;
s64 ns_offset;

- /* read clocksource: */
- cycle_now = clocksource_read(clock);
-
- /* calculate the delta since the last update_wall_time: */
- cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
-
- /* convert to nanoseconds: */
+ cycle_delta = clocksource_get_cycles(clock, clocksource_read(clock));
ns_offset = cyc2ns(clock, cycle_delta);

return ns_offset;
@@ -195,7 +189,7 @@ static void change_clocksource(void)

clock = new;
clock->cycle_last = now;
-
+ clock->cycle_accumulated = 0;
clock->error = 0;
clock->xtime_nsec = 0;
clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
@@ -205,9 +199,15 @@ static void change_clocksource(void)
printk(KERN_INFO "Time: %s clocksource has been installed.\n",
clock->name);
}
+
+void timekeeping_accumulate(void)
+{
+ clocksource_accumulate(clock, clocksource_read(clock));
+}
#else
static inline void change_clocksource(void) { }
static inline s64 __get_nsec_offset(void) { return 0; }
+void timekeeping_accumulate(void) { }
#endif

/**
@@ -302,6 +302,7 @@ static int timekeeping_resume(struct sys
timespec_add_ns(&xtime, timekeeping_suspend_nsecs);
/* re-base the last cycle value */
clock->cycle_last = clocksource_read(clock);
+ clock->cycle_accumulated = 0;
clock->error = 0;
timekeeping_suspended = 0;
write_sequnlock_irqrestore(&xtime_lock, flags);
@@ -448,27 +449,28 @@ static void clocksource_adjust(s64 offse
*/
void update_wall_time(void)
{
- cycle_t offset;
+ cycle_t cycle_now;

/* Make sure we're fully resumed: */
if (unlikely(timekeeping_suspended))
return;

#ifdef CONFIG_GENERIC_TIME
- offset = (clocksource_read(clock) - clock->cycle_last) & clock->mask;
+ cycle_now = clocksource_read(clock);
#else
- offset = clock->cycle_interval;
+ cycle_now = clock->cycle_last + clock->cycle_interval;
#endif
+ clocksource_accumulate(clock, cycle_now);
+
clock->xtime_nsec += (s64)xtime.tv_nsec << clock->shift;

/* normally this loop will run just once, however in the
* case of lost or late ticks, it will accumulate correctly.
*/
- while (offset >= clock->cycle_interval) {
+ while (clock->cycle_accumulated >= clock->cycle_interval) {
/* accumulate one interval */
clock->xtime_nsec += clock->xtime_interval;
- clock->cycle_last += clock->cycle_interval;
- offset -= clock->cycle_interval;
+ clock->cycle_accumulated -= clock->cycle_interval;

if (clock->xtime_nsec >= (u64)NSEC_PER_SEC << clock->shift) {
clock->xtime_nsec -= (u64)NSEC_PER_SEC << clock->shift;
@@ -482,13 +484,13 @@ void update_wall_time(void)
}

/* correct the clock when NTP error is too big */
- clocksource_adjust(offset);
+ clocksource_adjust(clock->cycle_accumulated);

/* store full nanoseconds into xtime */
xtime.tv_nsec = (s64)clock->xtime_nsec >> clock->shift;
clock->xtime_nsec -= (s64)xtime.tv_nsec << clock->shift;

- update_xtime_cache(cyc2ns(clock, offset));
+ update_xtime_cache(cyc2ns(clock, clock->cycle_accumulated));

/* check to see if there is a new clocksource to use */
change_clocksource();
Index: linux-mcount.git/arch/powerpc/kernel/time.c
===================================================================
--- linux-mcount.git.orig/arch/powerpc/kernel/time.c 2008-01-25 21:46:50.000000000 -0500
+++ linux-mcount.git/arch/powerpc/kernel/time.c 2008-01-25 21:47:09.000000000 -0500
@@ -773,7 +773,8 @@ void update_vsyscall(struct timespec *wa
stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
do_div(stamp_xsec, 1000000000);
stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
- update_gtod(clock->cycle_last, stamp_xsec, t2x);
+ update_gtod(clock->cycle_last-clock->cycle_accumulated,
+ stamp_xsec, t2x);
}

void update_vsyscall_tz(void)
--


\
 
 \ /
  Last update: 2008-01-30 04:31    [W:0.273 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site