lkml.org 
[lkml]   [2008]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH] sym53c8xx: fix bad memset argument in sym_set_cam_result_error
Date
Hello,

> On a big powerpc box I got the following oops with 2.6.24-git2:
>
> sym0: <1010-66> rev 0x1 at pci 0000:d0:01.0 irq 215
> sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
> sym0: SCSI BUS has been reset.
> scsi0 : sym-2.2.3
> target0:0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
> scsi 0:0:8:0: Direct-Access IBM ST318305LC C509 PQ: 0
> ANSI: 3
> target0:0:8: tagged command queuing enabled, command queue depth 16.
> target0:0:8: Beginning Domain Validation
> target0:0:8: asynchronous
> target0:0:8: wide asynchronous
> target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
> target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
> Unable to handle kernel paging request for data at address 0x00000000
> Faulting instruction address: 0xc000000000038460
> cpu 0x25: Vector: 300 (Data Access) at [c00000000f567840]
> pc: c000000000038460: .memcpy+0x60/0x280
> lr: d000000000050280: .sym_set_cam_result_error+0xfc/0x1e0 [sym53c8xx]
> sp: c00000000f567ac0
> msr: 8000000000009032
> dar: 0
> dsisr: 42000000
> current = 0xc000006d1e0af0a0
> paca = 0xc0000000004afc00
> pid = 0, comm = swapper
> enter ? for help
> [link register ] d000000000050280
> .sym_set_cam_result_error+0xfc/0x1e0 [sym53c8xx]
> [c00000000f567ac0] c00000000f567b80 (unreliable)
> [c00000000f567b80] d0000000000552b8 .sym_complete_error+0x12c/0x1bc [sym53c8xx]
> [c00000000f567c20] d0000000000561a4 .sym_int_sir+0xaa4/0x1718 [sym53c8xx]
> [c00000000f567d00] d000000000057e8c .sym_interrupt+0x4e4/0x6ec [sym53c8xx]
> [c00000000f567dc0] d00000000004fdf4 .sym53c8xx_intr+0x6c/0xdc [sym53c8xx]
> [c00000000f567e50] c0000000000a83e0 .handle_IRQ_event+0x7c/0xec
> [c00000000f567ef0] c0000000000aa344 .handle_fasteoi_irq+0x130/0x1f0
> [c00000000f567f90] c00000000002a538 .call_handle_irq+0x1c/0x2c
> [c000004d5e0b3a90] c00000000000c320 .do_IRQ+0x108/0x1d0
> [c000004d5e0b3b20] c000000000004790 hardware_interrupt_entry+0x18/0x1c
>
> The memset() in sym_set_cam_result_error() would appear to be trashing
> the scsi_cmnd struct instead of clearing sense_buffer.
>
> Signed-off-by: Nathan Lynch <ntl@pobox.com>
> ---
> drivers/scsi/sym53c8xx_2/sym_glue.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
> index 21e926d..e939f38 100644
> --- a/drivers/scsi/sym53c8xx_2/sym_glue.c
> +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
> @@ -207,7 +207,7 @@ void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid)
> /*
> * Bounce back the sense data to user.
> */
> - memset(&cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
> + memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
> memcpy(cmd->sense_buffer, cp->sns_bbuf,
> min(SCSI_SENSE_BUFFERSIZE, SYM_SNS_BBUF_LEN));
> #if 0

I was looking into it and found something interesting. What you see was just exposed by:

commit b80ca4f7ee36c26d300c5a8f429e73372d153379
Author: FUJITA Tomonori <tomof@acm.org>
Date: Sun Jan 13 15:46:13 2008 +0900

[SCSI] replace sizeof sense_buffer with

This replaces sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE in
several LLDs. It's a preparation for the future changes to remove
sense_buffer array in scsi_cmnd structure.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

But this is not a simple replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE
It has a side effect. Take a look a this portion of the commit:

--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -207,10 +207,9 @@ void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid)
/*
* Bounce back the sense data to user.
*/
- memset(&cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
+ memset(&cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
memcpy(cmd->sense_buffer, cp->sns_bbuf,
- min(sizeof(cmd->sense_buffer),
- (size_t)SYM_SNS_BBUF_LEN));
+ min(SCSI_SENSE_BUFFERSIZE, SYM_SNS_BBUF_LEN));

Before the patch:
1) memset sets cmd->sense_buffer pointer value to zero (only 4 bytes which is wrong)
2) memcpy copies min(sizeof(cmd->sense_buffer), (size_t)SYM_SNS_BBUF_LEN)) which
is equal to min(4, 32) so after this only first four bytes were copied from 32 bytes
long cp->sns_bbuf into the sense_buffer
After the patch:
1) memset zeroes 96 bytes of cmd structure starting at offset where sense_buffer in
cmd is and results in an oops which you fixed
2) memcpy copies min(SCSI_SENSE_BUFFERSIZE, SYM_SNS_BBUF_LEN)) is equal to
min(96, 32). cp->sns_bbuf is 32 bytes so I guess that's ok but that's different from
the code before b80ca4f7 which was wrong (copied only 4 bytes) but 'worked'.

Someone more experienced with that code should take a look at the logic of it.

Regards,

Mariusz


\
 
 \ /
  Last update: 2008-01-27 01:23    [W:0.060 / U:0.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site