jacliburn@bellsouth.net wrote:
> From: Jay Cliburn <jacliburn@bellsouth.net>
> 
> Update initialization parameters to match the current vendor driver
> version 1.2.40.2.
> 
> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
> ---
>  drivers/net/atlx/atl1.c |   14 +++++++-------
>  1 files changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
> index 262d3ca..695dcbc 100644
> --- a/drivers/net/atlx/atl1.c
> +++ b/drivers/net/atlx/atl1.c
> @@ -136,20 +136,20 @@ static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
>  	hw->rfd_fetch_gap = 1;
>  	hw->rx_jumbo_th = adapter->rx_buffer_len / 8;
>  	hw->rx_jumbo_lkah = 1;
> -	hw->rrd_ret_timer = 16;
> -	hw->tpd_burst = 4;
> +	hw->rrd_ret_timer = 4;	/* 8 us */
> +	hw->tpd_burst = 8;
>  	hw->tpd_fetch_th = 16;
> -	hw->txf_burst = 0x100;
> +	hw->txf_burst = 0x200;
>  	hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3;
>  	hw->tpd_fetch_gap = 1;
>  	hw->rcb_value = atl1_rcb_64;
>  	hw->dma_ord = atl1_dma_ord_enh;
> -	hw->dmar_block = atl1_dma_req_256;
> -	hw->dmaw_block = atl1_dma_req_256;
> +	hw->dmar_block = atl1_dma_req_1024;
> +	hw->dmaw_block = atl1_dma_req_1024;
>  	hw->cmb_rrd = 4;
>  	hw->cmb_tpd = 4;
> -	hw->cmb_rx_timer = 1;	/* about 2us */
> -	hw->cmb_tx_timer = 1;	/* about 2us */
> +	hw->cmb_rx_timer = 2;	/* about 4us */
> +	hw->cmb_tx_timer = 256;	/* about 512us */
>  	hw->smb_timer = 100000;	/* about 200ms */

ACK without any better knowledge...  but is any addition insight 
available at all?