lkml.org 
[lkml]   [2008]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 05/16] ide-probe: remove needless Status register reads

* Cache value read from the Status register in 'stat' variable in do_probe()
and enable_nest(), then remove remove needless Status register reads.

While at it:

* Add proper KERN_* levels to printk() calls.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-probe.c | 35 +++++++++++++++++++++--------------
1 file changed, 21 insertions(+), 14 deletions(-)

Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -423,8 +423,9 @@ static int ide_busy_sleep(ide_hwif_t *hw

static int do_probe (ide_drive_t *drive, u8 cmd)
{
- int rc;
ide_hwif_t *hwif = HWIF(drive);
+ int rc;
+ u8 stat;

if (drive->present) {
/* avoid waiting for inappropriate probes */
@@ -461,15 +462,17 @@ static int do_probe (ide_drive_t *drive,
/* failed: try again */
rc = try_to_identify(drive,cmd);
}
- if (hwif->INB(IDE_STATUS_REG) == (BUSY_STAT|READY_STAT))
+
+ stat = hwif->INB(IDE_STATUS_REG);
+
+ if (stat == (BUSY_STAT | READY_STAT))
return 4;

if ((rc == 1 && cmd == WIN_PIDENTIFY) &&
((drive->autotune == IDE_TUNE_DEFAULT) ||
(drive->autotune == IDE_TUNE_AUTO))) {
- printk("%s: no response (status = 0x%02x), "
- "resetting drive\n", drive->name,
- hwif->INB(IDE_STATUS_REG));
+ printk(KERN_ERR "%s: no response (status = 0x%02x), "
+ "resetting drive\n", drive->name, stat);
msleep(50);
hwif->OUTB(drive->select.all, IDE_SELECT_REG);
msleep(50);
@@ -477,11 +480,13 @@ static int do_probe (ide_drive_t *drive,
(void)ide_busy_sleep(hwif);
rc = try_to_identify(drive, cmd);
}
+
+ /* ensure drive IRQ is clear */
+ stat = hwif->INB(IDE_STATUS_REG);
+
if (rc == 1)
- printk("%s: no response (status = 0x%02x)\n",
- drive->name, hwif->INB(IDE_STATUS_REG));
- /* ensure drive irq is clear */
- (void) hwif->INB(IDE_STATUS_REG);
+ printk(KERN_ERR "%s: no response (status = 0x%02x)\n",
+ drive->name, stat);
} else {
/* not present or maybe ATAPI */
rc = 3;
@@ -502,6 +507,7 @@ static int do_probe (ide_drive_t *drive,
static void enable_nest (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
+ u8 stat;

printk("%s: enabling %s -- ", hwif->name, drive->id->model);
SELECT_DRIVE(drive);
@@ -515,11 +521,12 @@ static void enable_nest (ide_drive_t *dr

msleep(50);

- if (!OK_STAT((hwif->INB(IDE_STATUS_REG)), 0, BAD_STAT)) {
- printk("failed (status = 0x%02x)\n", hwif->INB(IDE_STATUS_REG));
- } else {
- printk("success\n");
- }
+ stat = hwif->INB(IDE_STATUS_REG);
+
+ if (!OK_STAT(stat, 0, BAD_STAT))
+ printk(KERN_CONT "failed (status = 0x%02x)\n", stat);
+ else
+ printk(KERN_CONT "success\n");

/* if !(success||timed-out) */
if (do_probe(drive, WIN_IDENTIFY) >= 2) {

\
 
 \ /
  Last update: 2008-01-22 00:23    [W:0.103 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site