lkml.org 
[lkml]   [2008]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 9/10] introduce intel_menlow platform specific driver
From
Date
Hi, Randy and Sam,

> > + if (result)
> > + goto end;
> > + }
> > +
> > + end:
Hah, Lindent always does this for me,
> Labels should begin in column 0 or 1. Only.
yes, and checkpatch.pl begins to complain about this
after using Lindent...
I think we should change one of them, :)

> > + return result;
> > +}
> > +
> > +
> > +const static struct acpi_device_id intel_menlow_memory_ids[] = {
> > + {"INT0002", 0},
> > + {"", 0},
>
> or just {} for the terminating entry, right?
Yes, I use this just to be consistent with other ACPI device drivers.

Thanks for your comments, please review the patch below,

From: Thomas Sujith <sujith.thomas@intel.com>

Intel menlow platform specific driver for thermal management extension.

Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
---
drivers/misc/Kconfig | 9
drivers/misc/Makefile | 1
drivers/misc/intel_menlow.c | 520 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 530 insertions(+)

Index: linux-2.6/drivers/misc/intel_menlow.c
===================================================================
--- /dev/null
+++ linux-2.6/drivers/misc/intel_menlow.c
@@ -0,0 +1,520 @@
+/*
+* intel_menlow.c - Intel menlow Driver for thermal management extension
+*
+* Copyright (C) 2008 Intel Corp
+* Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
+* Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
+* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; version 2 of the License.
+*
+* This program is distributed in the hope that it will be useful, but
+* WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+* General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License along
+* with this program; if not, write to the Free Software Foundation, Inc.,
+* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+*
+* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+*
+* This driver creates the sys I/F for programming the sensors.
+* It also implements the driver for intel menlow memory controller (hardware
+* id is INT0002) which makes use of the platform specific ACPI methods
+* to get/set bandwidth.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+
+#include <linux/thermal.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+MODULE_AUTHOR("Thomas Sujith");
+MODULE_AUTHOR("Zhang Rui");
+MODULE_DESCRIPTION("Intel Menlow platform specific driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Memory controller device control
+ */
+
+#define MEMORY_GET_BANDWIDTH "GTHS"
+#define MEMORY_SET_BANDWIDTH "STHS"
+#define MEMORY_ARG_CUR_BANDWIDTH 1
+#define MEMORY_ARG_MAX_BANDWIDTH 0
+
+static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev,
+ unsigned long *max_state)
+{
+ struct acpi_device *device = cdev->devdata;
+ acpi_handle handle = device->handle;
+ unsigned long value;
+ struct acpi_object_list arg_list;
+ union acpi_object arg;
+ acpi_status status = AE_OK;
+
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = MEMORY_ARG_MAX_BANDWIDTH;
+ status = acpi_evaluate_integer(handle, MEMORY_GET_BANDWIDTH,
+ &arg_list, &value);
+ if (ACPI_FAILURE(status))
+ return -EFAULT;
+
+ *max_state = value - 1;
+ return 0;
+}
+
+static int memory_get_max_bandwidth(struct thermal_cooling_device *cdev,
+ char *buf)
+{
+ unsigned long value;
+ if (memory_get_int_max_bandwidth(cdev, &value))
+ return -EINVAL;
+
+ return sprintf(buf, "%ld\n", value);
+}
+
+static int memory_get_cur_bandwidth(struct thermal_cooling_device *cdev,
+ char *buf)
+{
+ struct acpi_device *device = cdev->devdata;
+ acpi_handle handle = device->handle;
+ unsigned long value;
+ struct acpi_object_list arg_list;
+ union acpi_object arg;
+ acpi_status status = AE_OK;
+
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = MEMORY_ARG_CUR_BANDWIDTH;
+ status = acpi_evaluate_integer(handle, MEMORY_GET_BANDWIDTH,
+ &arg_list, &value);
+ if (ACPI_FAILURE(status))
+ return -EFAULT;
+
+ return sprintf(buf, "%ld\n", value);
+}
+
+static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev,
+ unsigned int state)
+{
+ struct acpi_device *device = cdev->devdata;
+ acpi_handle handle = device->handle;
+ struct acpi_object_list arg_list;
+ union acpi_object arg;
+ acpi_status status;
+ int temp;
+ unsigned long max_state;
+
+ if (memory_get_int_max_bandwidth(cdev, &max_state))
+ return -EFAULT;
+
+ if (max_state < 0 || state > max_state)
+ return -EINVAL;
+
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = state;
+
+ status =
+ acpi_evaluate_integer(handle, MEMORY_SET_BANDWIDTH, &arg_list,
+ (unsigned long *)&temp);
+
+ printk(KERN_INFO
+ "Bandwidth value was %d: status is %d\n", state, status);
+ if (ACPI_FAILURE(status))
+ return -EFAULT;
+
+ return 0;
+}
+
+static struct thermal_cooling_device_ops memory_cooling_ops = {
+ .get_max_state = memory_get_max_bandwidth,
+ .get_cur_state = memory_get_cur_bandwidth,
+ .set_cur_state = memory_set_cur_bandwidth,
+};
+
+/*
+ * Memory Device Management
+ */
+static int intel_menlow_memory_add(struct acpi_device *device)
+{
+ int result = -ENODEV;
+ acpi_status status = AE_OK;
+ acpi_handle dummy;
+ struct thermal_cooling_device *cdev;
+
+ if (!device)
+ return -EINVAL;
+
+ status = acpi_get_handle(device->handle, MEMORY_GET_BANDWIDTH, &dummy);
+ if (ACPI_FAILURE(status))
+ goto end;
+
+ status = acpi_get_handle(device->handle, MEMORY_SET_BANDWIDTH, &dummy);
+ if (ACPI_FAILURE(status))
+ goto end;
+
+ cdev = thermal_cooling_device_register("Memory controller", device,
+ &memory_cooling_ops);
+ acpi_driver_data(device) = cdev;
+ if (!cdev)
+ result = -ENODEV;
+ else {
+ result =
+ sysfs_create_link(&device->dev.kobj, &cdev->device.kobj,
+ "thermal_cooling");
+ if (result)
+ goto end;
+ result =
+ sysfs_create_link(&cdev->device.kobj, &device->dev.kobj,
+ "device");
+ if (result)
+ goto end;
+ }
+
+ end:
+ return result;
+}
+
+static int intel_menlow_memory_remove(struct acpi_device *device, int type)
+{
+ struct thermal_cooling_device *cdev = acpi_driver_data(device);
+
+ if (!device || !cdev)
+ return -EINVAL;
+
+ sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+ sysfs_remove_link(&cdev->device.kobj, "device");
+ thermal_cooling_device_unregister(cdev);
+
+ return 0;
+}
+
+const static struct acpi_device_id intel_menlow_memory_ids[] = {
+ {"INT0002", 0},
+ {"", 0},
+};
+
+static struct acpi_driver intel_menlow_memory_driver = {
+ .name = "intel_menlow_thermal_control",
+ .ids = intel_menlow_memory_ids,
+ .ops = {
+ .add = intel_menlow_memory_add,
+ .remove = intel_menlow_memory_remove,
+ },
+};
+
+/*
+ * Sensor control on menlow platform
+ */
+
+#define THERMAL_AUX0 0
+#define THERMAL_AUX1 1
+#define GET_AUX0 "GAX0"
+#define GET_AUX1 "GAX1"
+#define SET_AUX0 "SAX0"
+#define SET_AUX1 "SAX1"
+
+struct intel_menlow_attribute {
+ struct device_attribute attr;
+ struct device *device;
+ acpi_handle handle;
+ struct list_head node;
+};
+
+static LIST_HEAD(intel_menlow_attr_list);
+static DEFINE_MUTEX(intel_menlow_attr_lock);
+
+/*
+ * sensor_get_auxtrip - get the current auxtrip value from sensor
+ * @name: Thermalzone name
+ * @auxtype : AUX0/AUX1
+ * @buf: syfs buffer
+ */
+static int sensor_get_auxtrip(acpi_handle handle, int index, int *value)
+{
+ acpi_status status;
+
+ if ((index != 0 && index != 1) || !value)
+ return -EINVAL;
+
+ status = acpi_evaluate_integer(handle, index ? GET_AUX1 : GET_AUX0,
+ NULL, (unsigned long *)value);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * sensor_set_auxtrip - set the new auxtrip value to sensor
+ * @name: Thermalzone name
+ * @auxtype : AUX0/AUX1
+ * @buf: syfs buffer
+ */
+static int sensor_set_auxtrip(acpi_handle handle, int index, int value)
+{
+ acpi_status status;
+ union acpi_object arg = {
+ ACPI_TYPE_INTEGER
+ };
+ struct acpi_object_list args = {
+ 1, &arg
+ };
+ int temp;
+
+ if (index != 0 && index != 1)
+ return -EINVAL;
+
+ status = acpi_evaluate_integer(handle, index ? GET_AUX0 : GET_AUX1,
+ NULL, (unsigned long *)&temp);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+ if ((index && value < temp) || (!index && value > temp))
+ return -EINVAL;
+
+ arg.integer.value = value;
+ status = acpi_evaluate_integer(handle, index ? SET_AUX1 : SET_AUX0,
+ &args, (unsigned long *)&temp);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ /* do we need to check the return value of SAX0/SAX1 ? */
+
+ return 0;
+}
+
+#define to_intel_menlow_attr(_attr) \
+ container_of(_attr, struct intel_menlow_attribute, attr)
+
+static ssize_t aux0_show(struct device *dev,
+ struct device_attribute *dev_attr, char *buf)
+{
+ struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
+ int value;
+ int result;
+
+ result = sensor_get_auxtrip(attr->handle, 0, &value);
+
+ return result ? result : sprintf(buf, "%lu", KELVIN_TO_CELSIUS(value));
+}
+
+static ssize_t aux1_show(struct device *dev,
+ struct device_attribute *dev_attr, char *buf)
+{
+ struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
+ int value;
+ int result;
+
+ result = sensor_get_auxtrip(attr->handle, 1, &value);
+
+ return result ? result : sprintf(buf, "%lu", KELVIN_TO_CELSIUS(value));
+}
+
+static ssize_t aux0_store(struct device *dev,
+ struct device_attribute *dev_attr,
+ const char *buf, size_t count)
+{
+ struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
+ int value;
+ int result;
+
+ /*Sanity check; should be a positive integer */
+ if (!sscanf(buf, "%d", &value))
+ return -EINVAL;
+
+ if (value < 0)
+ return -EINVAL;
+
+ result = sensor_set_auxtrip(attr->handle, 0, CELSIUS_TO_KELVIN(value));
+ return result ? result : count;
+}
+
+static ssize_t aux1_store(struct device *dev,
+ struct device_attribute *dev_attr,
+ const char *buf, size_t count)
+{
+ struct intel_menlow_attribute *attr = to_intel_menlow_attr(dev_attr);
+ int value;
+ int result;
+
+ /*Sanity check; should be a positive integer */
+ if (!sscanf(buf, "%d", &value))
+ return -EINVAL;
+
+ if (value < 0)
+ return -EINVAL;
+
+ result = sensor_set_auxtrip(attr->handle, 1, CELSIUS_TO_KELVIN(value));
+ return result ? result : count;
+}
+
+/* BIOS can enable/disable the thermal user application in dabney platform */
+#define BIOS_ENABLED "\\_TZ.GSTS"
+static ssize_t bios_enabled_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ acpi_status status;
+ unsigned long bios_enabled;
+
+ status = acpi_evaluate_integer(NULL, BIOS_ENABLED, NULL, &bios_enabled);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ return sprintf(buf, "%s\n", bios_enabled ? "enabled" : "disabled");
+}
+
+static int intel_menlow_add_one_attribute(char *name, int mode, void *show,
+ void *store, struct device *dev,
+ acpi_handle handle)
+{
+ struct intel_menlow_attribute *attr;
+ int result;
+
+ attr = kzalloc(sizeof(struct intel_menlow_attribute), GFP_KERNEL);
+ if (!attr)
+ return -ENOMEM;
+
+ attr->attr.attr.name = name;
+ attr->attr.attr.mode = mode;
+ attr->attr.show = show;
+ attr->attr.store = store;
+ attr->device = dev;
+ attr->handle = handle;
+
+ result = device_create_file(dev, &attr->attr);
+ if (result)
+ return result;
+
+ mutex_lock(&intel_menlow_attr_lock);
+ list_add_tail(&attr->node, &intel_menlow_attr_list);
+ mutex_unlock(&intel_menlow_attr_lock);
+
+ return 0;
+}
+
+static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl,
+ void *context, void **rv)
+{
+ acpi_status status;
+ acpi_handle dummy;
+ struct thermal_zone_device *thermal;
+ int result;
+
+ result = acpi_bus_get_private_data(handle, (void **)&thermal);
+ if (result)
+ return 0;
+
+ /* _TZ must have the AUX0/1 methods */
+ status = acpi_get_handle(handle, GET_AUX0, &dummy);
+ if (ACPI_FAILURE(status))
+ goto not_found;
+
+ status = acpi_get_handle(handle, SET_AUX0, &dummy);
+ if (ACPI_FAILURE(status))
+ goto not_found;
+
+ result = intel_menlow_add_one_attribute("aux0", 0644,
+ aux0_show, aux0_store,
+ &thermal->device, handle);
+ if (result)
+ return AE_ERROR;
+
+ status = acpi_get_handle(handle, GET_AUX1, &dummy);
+ if (ACPI_FAILURE(status))
+ goto not_found;
+
+ status = acpi_get_handle(handle, SET_AUX1, &dummy);
+ if (ACPI_FAILURE(status))
+ goto not_found;
+
+ result = intel_menlow_add_one_attribute("aux1", 0644,
+ aux1_show, aux1_store,
+ &thermal->device, handle);
+ if (result)
+ return AE_ERROR;
+
+ /*
+ * create the "dabney_enabled" attribute which means the user app
+ * should be loaded or not
+ */
+
+ result = intel_menlow_add_one_attribute("bios_enabled", 0444,
+ bios_enabled_show, NULL,
+ &thermal->device, handle);
+ if (result)
+ return AE_ERROR;
+
+ not_found:
+ if (status == AE_NOT_FOUND)
+ return AE_OK;
+ else
+ return status;
+}
+
+static void intel_menlow_unregister_sensor(void)
+{
+ struct intel_menlow_attribute *pos, *next;
+
+ mutex_lock(&intel_menlow_attr_lock);
+ list_for_each_entry_safe(pos, next, &intel_menlow_attr_list, node) {
+ list_del(&pos->node);
+ device_remove_file(pos->device, &pos->attr);
+ kfree(pos);
+ }
+ mutex_unlock(&intel_menlow_attr_lock);
+
+ return;
+}
+
+static int __init intel_menlow_module_init(void)
+{
+ int result = -ENODEV;
+ acpi_status status;
+ unsigned long enable;
+
+ if (acpi_disabled)
+ return result;
+
+ /* Looking for the \_TZ.GSTS method */
+ status = acpi_evaluate_integer(NULL, BIOS_ENABLED, NULL, &enable);
+ if (ACPI_FAILURE(status) || !enable)
+ return -ENODEV;
+
+ /* Looking for ACPI device MEM0 with hardware id INT0002 */
+ result = acpi_bus_register_driver(&intel_menlow_memory_driver);
+ if (result)
+ return result;
+
+ /* Looking for sensors in each ACPI thermal zone */
+ status = acpi_walk_namespace(ACPI_TYPE_THERMAL, ACPI_ROOT_OBJECT,
+ ACPI_UINT32_MAX,
+ intel_menlow_register_sensor, NULL, NULL);
+ if (ACPI_FAILURE(status))
+ result = -ENODEV;
+
+ return 0;
+}
+
+static void __exit intel_menlow_module_exit(void)
+{
+ acpi_bus_unregister_driver(&intel_menlow_memory_driver);
+ intel_menlow_unregister_sensor();
+}
+
+module_init(intel_menlow_module_init);
+module_exit(intel_menlow_module_exit);
Index: linux-2.6/drivers/misc/Kconfig
===================================================================
--- linux-2.6.orig/drivers/misc/Kconfig
+++ linux-2.6/drivers/misc/Kconfig
@@ -232,4 +232,13 @@ config ATMEL_SSC

If unsure, say N.

+config INTEL_MENLOW
+ tristate "Thermal Management driver for Intel menlow platform"
+ depends on ACPI_THERMAL
+ ---help---
+ ACPI thermal management enhancement driver on
+ Intel Menlow platform.
+
+ If unsure, say N.
+
endif # MISC_DEVICES
Index: linux-2.6/drivers/misc/Makefile
===================================================================
--- linux-2.6.orig/drivers/misc/Makefile
+++ linux-2.6/drivers/misc/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_SONY_LAPTOP) += sony-laptop
obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
obj-$(CONFIG_FUJITSU_LAPTOP) += fujitsu-laptop.o
obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
+obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o



\
 
 \ /
  Last update: 2008-01-18 04:31    [W:0.102 / U:5.904 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site