Messages in this thread | | | Date | Tue, 15 Jan 2008 11:02:18 +0000 | From | Alan Cox <> | Subject | Re: SATA DOM is not identified by ata_piix module |
| |
On Tue, 15 Jan 2008 18:11:25 +0800 "Mao Rui" <maorui@yuvad.com> wrote:
> Hi, > > I have a PQI Turbo SATA DOM. It works well under Windows. I installed it in > a SuperMicro motherboard, Intel 5000P chipset. The OS is Ubuntu 7.04, kernel > 2.6.20-15. But the DOM is not appeared as a device node, and I found several > error messages in kernel log.
Generally it is a good idea to report problems with vendor built kernels to the vendor and their support, especially one that is 3 releases behind. They have a much better idea what is in that kernel and who else has seen problems.
> [ 67.124299] ata2.00: qc timeout (cmd 0x91) > [ 67.124306] ata2.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, > err_mask=0x4)
We issued commands, it didn't respond. That could be a libata problem but actually looks more like an IRQ routing problem.
> Actually I also have a PQI IDE DOM, it have same error with Ubuntu 7.04 /
The PQI DOM is a bit odd, it is however known to work with libata at least for the PATA one, and the versions which don't understand SET_XFER_MODE to work with current kernels. (Your failure mode isn't the SET_XFER_MODE one - it hasn't got that far).
Alan -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |