lkml.org 
[lkml]   [2008]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectquestion regarding user mode linux
I try to setup a user mode linux session and dmesg says:
"[cut]
ubda: unknown partition table
Choosing a random ethernet address for device eth0
Netdevice 0 (9e:69:a0:f3:f1:f0) : TUN/TAP backend - IP = 192.168.5.1
Filesystem "ubda": Disabling barriers, not supported by the underlying device
[cut]"

id est eth0.

But the network device is:
# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth6: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0

id est eth6

# uname -a
Linux localhost 2.6.24-rc7-gd0c4c9d4 #1 Sat Jan 12 13:25:44 CET 2008 i686 UML
User Mode Linux GNU/Linux

Any ideas what could be wrong here?

mfg
thomas


\
 
 \ /
  Last update: 2008-01-13 15:27    [W:0.033 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site