lkml.org 
[lkml]   [2008]   [Jan]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectALSA HDA problem with 64-bit kernels
Heip!


I recently moved to 64-bit kernel, but mixed sounds (ie. mpegs played with
a media player) don't work with optical S/PDIF connection. AC3/DTS
passthrough still works, and I can hear the mixed sounds on analog
connector. And yes, I have unmuted the IEC958 mixer setting.

Tested kernels:

ALSA 1.0.14:
2.6.23.1 32bit: works
2.6.23.1 64bit: broken
2.6.23.12 64bit: broken
2.6.23.12 64bit kernel, 32bit userspace: broken

ALSA 1.0.15:
2.6.24-rc6 64bit: broken (and half of the mixer settings are missing)


The soundcard is integrated to the motherboard (Abit IP35 Pro) and I can't
find any more information on it than it is "7.1 CH HD Audio CODEC".


Relevant part of dmesg (it is the same for 32/64 bit versions, expect that
the interrput goes to IRQ 18):

===cut dmesg
Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
usbcore: registered new interface driver snd-usb-audio
ALSA device list:
#0: HDA Intel at 0xfdff4000 irq 22
===cut lspci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: ABIT Computer Corp. Unknown device [147b:1083]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fdff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
===cut asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfdff4000 irq 22
===cut

There are no differences in /proc/asound directory entries expect the cards
file (different IRQ).


Any ideas how to fix this?


//T



\
 
 \ /
  Last update: 2008-01-01 21:23    [W:0.037 / U:0.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site