lkml.org 
[lkml]   [2007]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.6.23-rc6: usb 1-1: device not accepting address 2, error -62
    Second try to send, after I created "postmaster" on my domain.
    Just to ensure the CC-list works correct. Sorry for this double posting.

    > 550-Postmaster verification failed while checking <haveaniceday@cv-sv.de>
    > 550-Called: 212.227.15.134
    > 550-Sent: RCPT TO:<postmaster@cv-sv.de>
    > 550-Response: 550 <postmaster@cv-sv.de>: invalid address
    > 550-Several RFCs state that you are required to have a postmaster
    > 550-mailbox for each mail domain. This host does not accept mail
    > 550-from domains whose servers reject the postmaster address.
    >550 Sender verify failed



    > Does the machine otherwise work OK?
    >
    Yes, the USB is working fine for the easy things I do with it.

    Hmm, so I expect this 2.6.22 message:
    >> <6>usb 1-1: USB disconnect, address 2

    became this 2.6.23rc6 message:
    >> <3>usb 1-1: device not accepting address 2, error -62

    and nothing is harmed.



    Andrew Morton wrote:
    > Let's cc the USB mailing list.
    >
    > On Fri, 14 Sep 2007 23:28:23 +0200 Christian Volkmann <haveaniceday@cv-sv.de> wrote:
    >
    >> Hi everybody,
    >>
    >> I have an error message with 2.6.23-rc6.
    >> This did not happen with 2.6.22.
    >
    > Another one for Michal's dirt file.
    >
    >> The kernel reports message like this:
    >> <3>usb 1-1: device not accepting address 2, error -62
    >> <3>hub 2-2.1:1.0: hub_port_status failed (err = -71)
    >>
    >> Does this message harm or is something broken in 2.6.23-rc6 ?
    >> I get this kind of messages also with 2.6.23-rc3
    >
    > Does the machine otherwise work OK?
    >
    > Even if it does, I don't think we should be (newly) spraying scary messages
    > like that at people.
    >
    >> Best regards,
    >>
    >> Christian
    >>
    >>
    >> Please see below for:
    >>
    >> grep -e hub -e usb boot.msg for a 2.6.23-rc6 boot. (that boot was without (err = -71)
    >> grep -e hub -e usb boot.msg for a 2.6.22 boot.
    >> lspci -vnn (2.6.22)
    >> lsusb -v (2.6.22)
    >>
    >>
    >> 2.6.23-rc6 boot.msg extract ( hub/usb )
    >>
    >> <6>usbcore: registered new interface driver usbfs
    >> <6>usbcore: registered new interface driver hub
    >> <6>usbcore: registered new device driver usb
    >> <6>usb usb1: configuration #1 chosen from 1 choice
    >> <6>hub 1-0:1.0: USB hub found
    >> <6>hub 1-0:1.0: 2 ports detected
    >> <6>usb usb2: configuration #1 chosen from 1 choice
    >> <6>hub 2-0:1.0: USB hub found
    >> <6>hub 2-0:1.0: 2 ports detected
    >> <6>usb 1-1: new low speed USB device using ohci_hcd and address 2
    >> <6>usb usb3: configuration #1 chosen from 1 choice
    >> <6>hub 3-0:1.0: USB hub found
    >> <6>hub 3-0:1.0: 2 ports detected
    >> <6>usb usb4: configuration #1 chosen from 1 choice
    >> <6>hub 4-0:1.0: USB hub found
    >> <6>hub 4-0:1.0: 6 ports detected
    >> <6>usb usb5: configuration #1 chosen from 1 choice
    >> <6>hub 5-0:1.0: USB hub found
    >> <6>hub 5-0:1.0: 2 ports detected
    >> <3>usb 1-1: device not accepting address 2, error -62
    >> <6>usb 5-2: new full speed USB device using uhci_hcd and address 2
    >> <6>usb usb6: configuration #1 chosen from 1 choice
    >> <6>hub 6-0:1.0: USB hub found
    >> <6>hub 6-0:1.0: 4 ports detected
    >> <6>usb usb7: configuration #1 chosen from 1 choice
    >> <6>hub 7-0:1.0: USB hub found
    >> <6>hub 7-0:1.0: 2 ports detected
    >> <6>usb 1-1: new low speed USB device using ohci_hcd and address 4
    >> <6>usb 1-1: configuration #1 chosen from 1 choice
    >> <6>usb 2-1: new full speed USB device using ohci_hcd and address 2
    >> <6>usb 2-1: configuration #1 chosen from 1 choice
    >> <6>usb 6-2: new high speed USB device using ehci_hcd and address 2
    >> <6>usb 6-2: configuration #1 chosen from 1 choice
    >> <6>hub 6-2:1.0: USB hub found
    >> <6>hub 6-2:1.0: 2 ports detected
    >> <6>usbcore: registered new interface driver hiddev
    >> <6>input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:03.0-1
    >> <6>usbcore: registered new interface driver usbhid
    >> <6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    >> <7>usb-storage: device found at 2
    >> <7>usb-storage: waiting for device to settle before scanning
    >> <6>usb 6-2.1: new high speed USB device using ehci_hcd and address 3
    >> <6>usb 6-2.1: configuration #1 chosen from 1 choice
    >> <6>hub 6-2.1:1.0: USB hub found
    >> <6>hub 6-2.1:1.0: 4 ports detected
    >> <6>usb 6-2.1.1: new high speed USB device using ehci_hcd and address 4
    >> <6>usb 6-2.1.1: configuration #1 chosen from 1 choice
    >> <7>usb-storage: device found at 4
    >> <7>usb-storage: waiting for device to settle before scanning
    >> <6>usbcore: registered new interface driver usb-storage
    >> <7>usb-storage: device scan complete
    >> <7>usb-storage: device scan complete
    >>
    >> 2.6.22 boot.msg extract ( hub/usb )
    >>
    >> <6>usbcore: registered new interface driver usbfs
    >> <6>usbcore: registered new interface driver hub
    >> <6>usbcore: registered new device driver usb
    >> <6>usb usb1: configuration #1 chosen from 1 choice
    >> <6>hub 1-0:1.0: USB hub found
    >> <6>hub 1-0:1.0: 2 ports detected
    >> <6>usb usb2: configuration #1 chosen from 1 choice
    >> <6>hub 2-0:1.0: USB hub found
    >> <6>hub 2-0:1.0: 2 ports detected
    >> <6>usb 1-1: new low speed USB device using ohci_hcd and address 2
    >> <6>usb usb3: configuration #1 chosen from 1 choice
    >> <6>hub 3-0:1.0: USB hub found
    >> <6>hub 3-0:1.0: 2 ports detected
    >> <6>usb 1-1: configuration #1 chosen from 1 choice
    >> <6>usb usb4: configuration #1 chosen from 1 choice
    >> <6>hub 4-0:1.0: USB hub found
    >> <6>hub 4-0:1.0: 6 ports detected
    >> <6>usb 1-1: USB disconnect, address 2
    >> <6>usb usb5: configuration #1 chosen from 1 choice
    >> <6>hub 5-0:1.0: USB hub found
    >> <6>hub 5-0:1.0: 4 ports detected
    >> <6>usb usb6: configuration #1 chosen from 1 choice
    >> <6>hub 6-0:1.0: USB hub found
    >> <6>hub 6-0:1.0: 2 ports detected
    >> <6>usb usb7: configuration #1 chosen from 1 choice
    >> <6>hub 7-0:1.0: USB hub found
    >> <6>hub 7-0:1.0: 2 ports detected
    >> <6>usb 5-2: new high speed USB device using ehci_hcd and address 2
    >> <6>usb 5-2: configuration #1 chosen from 1 choice
    >> <6>hub 5-2:1.0: USB hub found
    >> <6>hub 5-2:1.0: 2 ports detected
    >> <6>usb 1-1: new low speed USB device using ohci_hcd and address 3
    >> <6>usb 1-1: configuration #1 chosen from 1 choice
    >> <6>usbcore: registered new interface driver hiddev
    >> <6>usb 2-1: new full speed USB device using ohci_hcd and address 2
    >> <6>usb 2-1: configuration #1 chosen from 1 choice
    >> <6>usb 5-2.1: new high speed USB device using ehci_hcd and address 3
    >> <6>usb 5-2.1: configuration #1 chosen from 1 choice
    >> <6>hub 5-2.1:1.0: USB hub found
    >> <6>hub 5-2.1:1.0: 4 ports detected
    >> <6>input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:03.0-1
    >> <7>usb-storage: device found at 2
    >> <7>usb-storage: waiting for device to settle before scanning
    >> <6>usb 5-2.1.1: new high speed USB device using ehci_hcd and address 4
    >> <6>usb 5-2.1.1: configuration #1 chosen from 1 choice
    >> <6>usbcore: registered new interface driver usbhid
    >> <7>usb-storage: device found at 4
    >> <7>usb-storage: waiting for device to settle before scanning
    >> <6>usbcore: registered new interface driver usb-storage
    >> <6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    >> <7>usb-storage: device scan complete
    >> <7>usb-storage: device scan complete
    >>
    >> [system info snipped ]
    >>
    >


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2007-09-15 14:09    [W:0.050 / U:30.588 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site