lkml.org 
[lkml]   [2007]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] SCSI: update Kconfig help text to indicate SCSI core's widespread usage
From
On Fri, Sep 14, 2007 at 11:06:44PM +0200, Stefan Richter wrote:
> On 14 Sep, Lennart Sorensen wrote:
> > On Fri, Sep 14, 2007 at 10:14:16PM +0200, Stefan Richter wrote:
> >> - If you want to use a SCSI or FireWire CD-ROM under Linux,
> >> + If you want to use a SCSI, SATA, USB or FireWire CD-ROM or DVD-ROM,
> >> say Y and read the SCSI-HOWTO and the CDROM-HOWTO at
> >> <http://www.tldp.org/docs.html#howto>. Also make sure to say
> >> Y or M to "ISO 9660 CD-ROM file system support" later.
> >
> > How about that one for libata driven PATA CDROM drives? Could replace
> > SATA with libata, or something similar.
>
>
> From: Stefan Richter <stefanr@s5r6.in-berlin.de>
> Subject: SCSI: update Kconfig help text to indicate SCSI core's widespread usage
>
> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
> ---
> drivers/scsi/Kconfig | 67 ++++++++++++++++++++++---------------------
> 1 file changed, 35 insertions(+), 32 deletions(-)
>
> Index: linux-2.6.23-rc6/drivers/scsi/Kconfig
> ===================================================================
> --- linux-2.6.23-rc6.orig/drivers/scsi/Kconfig
> +++ linux-2.6.23-rc6/drivers/scsi/Kconfig
> @@ -12,23 +12,31 @@ config SCSI
> depends on BLOCK
> select SCSI_DMA if HAS_DMA
> ---help---
> - If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
> - any other SCSI device under Linux, say Y and make sure that you know
> - the name of your SCSI host adapter (the card inside your computer
> - that "speaks" the SCSI protocol, also called SCSI controller),
> - because you will be asked for it.
> -
> - You also need to say Y here if you have a device which speaks
> - the SCSI protocol. Examples of this include the parallel port
> - version of the IOMEGA ZIP drive, USB storage devices, Fibre
> - Channel, FireWire storage and the IDE-SCSI emulation driver.
> + This option enables core support for SCSI protocols.
> + You need it
> + - for classic parallel SCSI hardware,
> + - for newer SCSI transports such as Fibre Channel, FireWire storage,
> + or iSCSI,
> + - for non-SCSI hardware which speaks SCSI protocols, such as USB
> + storage devices or the parallel port version of Iomega Zip drive,
> + - for non-SCSI hardware whose drivers translate from and to SCSI
> + protocols, most notably all Serial ATA drivers, and Parallel ATA
> + via the ATA configuration option.
>
> To compile this driver as a module, choose M here and read
> <file:Documentation/scsi/scsi.txt>.
> The module will be called scsi_mod.
>
> However, do not compile this as a module if your root file system
> - (the one containing the directory /) is located on a SCSI device.
> + (the one containing the directory /) is located on a SCSI device
> + or on a device whose driver represents it as SCSI device, as
> + indicated above. Choose Y in this case, or set up an initrd.
> +
> + Subsequent options in this menu enable specific SCSI command set
> + support for harddisks, CD/DVD-ROM/R/W, tapes etc.. This menu also
> + presents options for specific SCSI controllers, while options for
> + some other SCSI transports and all non-SCSI controllers are located
> + in other menus (SATA, USB, FireWire etc.).
>
> config SCSI_DMA
> bool
> @@ -57,32 +65,27 @@ config SCSI_PROC_FS
>
> If unsure say Y.
>
> -comment "SCSI support type (disk, tape, CD-ROM)"
> +comment "SCSI command set drivers (disk, tape, CD-ROM)"
> depends on SCSI
>
> config BLK_DEV_SD
> - tristate "SCSI disk support"
> + tristate "Harddisks and other Direct access devices"
> depends on SCSI
> ---help---
> - If you want to use SCSI hard disks, Fibre Channel disks,
> - Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
> - USB storage or the SCSI or parallel port version of
> - the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
> - the Disk-HOWTO and the Multi-Disk-HOWTO, available from
> - <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
> - CD-ROMs.
> + Say Y if you want to use harddisks and similar block-oriented devices
> + via SCSI or via drivers which use SCSI command sets (e.g. the Serial
> + and Parallel ATA kernel subsystem, USB, and more).
>
> To compile this driver as a module, choose M here and read
> <file:Documentation/scsi/scsi.txt>.
> The module will be called sd_mod.
>
> - Do not compile this driver as a module if your root file system
> - (the one containing the directory /) is located on a SCSI disk.
> - In this case, do not compile the driver for your SCSI host adapter
> - (below) as a module either.
> + If your root file system (the one containing the directory /) is
> + located on a disk which accessed via this driver, choose Y instead of
> + M or set up a suitable initrd.
>
> config CHR_DEV_ST
> - tristate "SCSI tape support"
> + tristate "Tape drives"
> depends on SCSI
> ---help---
> If you want to use a SCSI tape drive under Linux, say Y and read the
> @@ -95,7 +98,7 @@ config CHR_DEV_ST
> <file:Documentation/scsi/scsi.txt>. The module will be called st.
>
> config CHR_DEV_OSST
> - tristate "SCSI OnStream SC-x0 tape support"
> + tristate "SCSI OnStream SC-x0 tape drives"
> depends on SCSI
> ---help---
> The OnStream SC-x0 SCSI tape drives cannot be driven by the
> @@ -117,13 +120,13 @@ config CHR_DEV_OSST
> <file:Documentation/scsi/scsi.txt>. The module will be called osst.
>
> config BLK_DEV_SR
> - tristate "SCSI CDROM support"
> + tristate "CD-ROMs, DVD-ROMs"
> depends on SCSI
> ---help---
> - If you want to use a SCSI or FireWire CD-ROM under Linux,
> - say Y and read the SCSI-HOWTO and the CDROM-HOWTO at
> - <http://www.tldp.org/docs.html#howto>. Also make sure to say
> - Y or M to "ISO 9660 CD-ROM file system support" later.
> + Say Y if you want to use CD-ROMs or DVD-ROMs via SCSI or via drivers
> + which use SCSI command sets (e.g. the Serial and Parallel ATA kernel
> + subsystem, USB, and more). Also make sure to say Y or M to "ISO 9660
> + CD-ROM file system support" later.
>
> To compile this driver as a module, choose M here and read
> <file:Documentation/scsi/scsi.txt>.
> @@ -164,7 +167,7 @@ config CHR_DEV_SG
> If unsure, say N.
>
> config CHR_DEV_SCH
> - tristate "SCSI media changer support"
> + tristate "SCSI media changers"
> depends on SCSI
> ---help---
> This is a driver for SCSI media changers. Most common devices are

Looks great. I like it.

--
Len Sorensen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-09-14 23:13    [W:1.839 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site