lkml.org 
[lkml]   [2007]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: PATCH/RFC: [kdump] fix APIC shutdown sequence
On Mon, 06 Aug 2007 17:08:05 +0200
Martin Wilck <martin.wilck@fujitsu-siemens.com> wrote:

> PATCH/RFC: [kdump] fix APIC shutdown sequence
>
> This patch fixes a problem that we have encountered
> with kdump under high I/O load on some machines.
> The machines showing the errors have an Intel ICH7
> chip set with a 6702PXH PCI Express-to-PCI Bridge
> (8086:032c) containing an IO-APIC.
>
> The bug symptom is that certain controllers connected
> to the 6702PXH bridge wouldn't receive any IRQs in the
> kdump kernel. In the error case (which is about 20% of
> all cases) the IRR bit of the IO-APIC pin for that
> controller is always set after the start of the kdump
> kernel, indicating an IRQ in progress. We haven't found
> a way to recover from this situation when it has once
> occured, except for a system reset.
>
> The error is caused by IRQs arriving while the APIC
> subsystem is deactivated in machine_crash_shutdown().
>
> Apparently, the IO-APIC gets stuck if it sends an IRQ
> message to a Local APIC and never receives an EOI for that
> message. This can have several possible reasons:
>
> 1. If, under SMP, the IO-APIC logical destination field is
> set by the IRQ balancing code to one of the "other"
> CPUs (i.e. not the crashing_cpu), and an IRQ arrives
> on the respective pin after that CPU has shut down
> its local APIC (but before the IO-APIC pin is masked)
> the IRQ message can't be delivered.
>
> 2. The crashing CPU itself disables its local APIC
> before the IO-APIC, leaving a short time window
> where the IOAPIC can receive IRQs, but not
> deliver them.
>
> 3. An IRQ is received and delivered to a local APIC, but
> no CPU ever executes the IRQ handler and therefore no
> EOI is sent.
>
> After a lot of failed attempts, i have come up with the
> following patch, which fixes the problem.
>
> The patch first masks all IO-Apic pins to avoid a sitation
> where the IO-Apic can receive, but not deliver, the IRQs.
> Moreover, it enables interrupts for a short period before
> eventually starting the kdump kernel, so that EOIs can be
> sent to the APICs as necessary.
>
> Notes:
> a) Simply calling disable_IO_APIC() early doesn't
> work, probably because that also clears the IRQ vector
> information, so that arriving EOI messages can't be
> associated with pins by the IO-APIC.
> b) We have tried patches that avoid re-enabling interrupts,
> but so far without success. Re-enabling IRQs is of course
> dangerous while dumping, and I'd rather find a way to avoid it.
> c) There are indications that besides the EOI, it's also
> necessary that the PCI IRQ pin is deasserted at least for
> a short time. That usually requires that the driver IRQ
> handler is called and tells the FW that the IRQ was received.
> Whether or not this is a requirement hasn't been finally
> clarified yet.
> d) The problem is only seen with the IO-APIC in the 6702PXH
> PCI bridge, which is the system's secondary IO-APIC. On the
> system's main IO-APIC, we see other IRQs (timer etc) arrive
> and never get an EOI, but we see no errors.
>
> The patch below is against 2.6.23-rc1. The problem was
> originally analyzed and the patch developed against the
> Red Hat EL5 kernel (2.6.18-8.el5). I verified that the
> problem still occurs with 2.6.23-rc1, and that the patch
> below fixes the problem.
>

Some little things..

Please feed the diff through scripts/checkpatch.pl. It finds a lot of issues.

For some reason you added a lot of lines which start with space-tab rather
than tab. checkpatch does detect this.


> diff -puN arch/x86_64/kernel/crash.c~kdump-fix-apic-shutdown-sequence arch/x86_64/kernel/crash.c
> --- a/arch/x86_64/kernel/crash.c~kdump-fix-apic-shutdown-sequence
> +++ a/arch/x86_64/kernel/crash.c
> @@ -18,6 +18,7 @@
> #include <linux/elf.h>
> #include <linux/elfcore.h>
> #include <linux/kdebug.h>
> +#include <linux/interrupt.h>
>
> #include <asm/processor.h>
> #include <asm/hardirq.h>
> @@ -30,6 +31,11 @@ static int crashing_cpu;
>
> #ifdef CONFIG_SMP
> static atomic_t waiting_for_crash_ipi;
> +static atomic_t crash_ipi_stage2 = ATOMIC_INIT(0);
> +
> +extern void remove_siblinginfo(int);
> +extern void remove_cpu_from_maps(void);
> +extern void crash_mask_IO_APIC(int);

please neverevereverever put extern declarations in C files. Find a
suitable header for it, ensure that the header is included by the
definition site and by all callers.

> static int crash_nmi_callback(struct notifier_block *self,
> unsigned long val, void *data)
> @@ -53,13 +59,30 @@ static int crash_nmi_callback(struct not
> local_irq_disable();
>
> crash_save_cpu(regs, cpu);
> - disable_local_APIC();
> - atomic_dec(&waiting_for_crash_ipi);
> + disable_APIC_timer();
> + atomic_dec(&waiting_for_crash_ipi);
> +
> + while(atomic_read(&crash_ipi_stage2) == 0)

Need a space here. Everything I've mentioned thus far should have been
picked up by checkpatch, so I'll shut up now.

> +
> +static void nmi_shootdown_cpus_stage2(void)
> +{
> +
> + unsigned long msecs;
> + atomic_set(&crash_ipi_stage2, num_online_cpus());
> +
> msecs = 1000; /* Wait at most a second for the other cpus to stop */
> - while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
> + while ((atomic_read(&crash_ipi_stage2) > 1) && msecs) {
> mdelay(1);
> msecs--;
> }
> - /* Leave the nmi callback set */
> - disable_local_APIC();
> }

This is tricky code which you're adding. Empirically-based stuff derived
from observation and experimentation. It is quite impossible for readers
of this code to work out what the code is doing and why it is doing it
purely by reading the C statements.

Hence for any form of maintainability you really do need to spell
*everything* out in code comments. All those little discoveries and
observations. Otherwise it'll be lost, unless the fraught reader decides
to go hunting in the git repository.

> #else
> static void nmi_shootdown_cpus(void)
> {
> /* There are no cpus to shootdown */
> }
> +static void nmi_shootdown_cpus_stage2(void)
> +{
> +}
> #endif

Although the compiler will inline this function for you, we'd
conventionally declare it static inline. We might as well do this here as
well, and fix up nmi_shootdown_cpus() too.

> diff -puN arch/x86_64/kernel/io_apic.c~kdump-fix-apic-shutdown-sequence arch/x86_64/kernel/io_apic.c
> --- a/arch/x86_64/kernel/io_apic.c~kdump-fix-apic-shutdown-sequence
> +++ a/arch/x86_64/kernel/io_apic.c
> @@ -371,6 +371,50 @@ static void unmask_IO_APIC_irq (unsigned
> spin_unlock_irqrestore(&ioapic_lock, flags);
> }
>
> +static void crash_mask_IO_APIC_pin(unsigned int apic, unsigned int pin, int reg1)
> +{
> + struct IO_APIC_route_entry entry;
> + unsigned long flags;
> +
> + /* Check delivery_mode to be sure we're not clearing an SMI pin
> + * Don't bother disabling masked pins
> + */
> + spin_lock_irqsave(&ioapic_lock, flags);
> + *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
> + spin_unlock_irqrestore(&ioapic_lock, flags);
> + if (entry.delivery_mode == dest_SMI || entry.mask)
> + return;
> +
> + entry.mask = 1;
> + *(((int*)&entry) + 1) = reg1;
> +
> + spin_lock_irqsave(&ioapic_lock, flags);
> + io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0));
> + io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1));
> + io_apic_sync(apic);
> + spin_unlock_irqrestore(&ioapic_lock, flags);
> +}
> +
> +/*
> + * This function is used for kdump to mask all IO-APIC IRQs, and reset
> + * the destination apic ID.
> + */
> +void crash_mask_IO_APIC(int cpu)
> +{
> + int apic, pin;
> + int reg1;
> + cpumask_t mask;
> +
> + cpus_clear(mask);
> + cpu_set(cpu, mask);
> + reg1 = SET_APIC_LOGICAL_ID(cpu_mask_to_apicid(mask));
> +
> + for (apic = 0; apic < nr_ioapics; apic++) {
> + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
> + crash_mask_IO_APIC_pin(apic, pin, reg1);
> + }
> +}

The above two functions are unneeded if CONFIG_CRASH_DUMP=n, hence they
should have the appropriate ifdef wrapping.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-08-08 02:33    [W:0.099 / U:1.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site