lkml.org 
[lkml]   [2007]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    SubjectRe: [PATCH 2.6.22.y] ieee1394: revert "sbp2: enforce 32bit DMA mapping"
    On Mon, Aug 06, Benjamin Herrenschmidt wrote:

    > BTW. Any reason why you don't set the DMA mask in the ohci driver rather
    > than the sbp2 one ?

    I used this patch, and the attached CD was found.
    What dma mask should be used in ohci_probe()?


    ---
    drivers/ieee1394/ohci1394.c | 2 ++
    drivers/ieee1394/sbp2.c | 3 +++
    drivers/pci/pci.c | 1 +
    drivers/pci/probe.c | 1 +
    include/asm-powerpc/dma-mapping.h | 1 +
    5 files changed, 8 insertions(+)

    --- a/drivers/ieee1394/ohci1394.c
    +++ b/drivers/ieee1394/ohci1394.c
    @@ -3223,6 +3223,8 @@ static int __devinit ohci1394_pci_probe(
    }
    #endif /* CONFIG_PPC_PMAC */

    + if (pci_set_dma_mask(dev, DMA_32BIT_MASK))
    + FAIL(-ENXIO, "Failed to set DMA mask");
    if (pci_enable_device(dev))
    FAIL(-ENXIO, "Failed to enable OHCI hardware");
    pci_set_master(dev);
    --- a/drivers/ieee1394/sbp2.c
    +++ b/drivers/ieee1394/sbp2.c
    @@ -775,12 +775,15 @@ static struct sbp2_lu *sbp2_alloc_device
    goto failed_alloc;
    }
    #else
    + printk(KERN_DEBUG "%s():%u dev '%s' %p parent '%s' %p %016lx\n",__func__,__LINE__,hi->host->device.bus_id,hi->host->device.dma_mask,hi->host->device.parent->bus_id,(hi->host->device.parent->dma_mask),*(hi->host->device.parent->dma_mask));
    if (dma_set_mask(hi->host->device.parent, DMA_32BIT_MASK)) {
    SBP2_ERR("failed to set 4GB DMA mask");
    goto failed_alloc;
    }
    #endif
    }
    + else
    + printk(KERN_DEBUG "%s():%u dev '%s' parent '%s'\n",__func__,__LINE__,hi->host->device.bus_id,hi->host->device.parent->bus_id);

    /* Prevent unloading of the 1394 host */
    if (!try_module_get(hi->host->driver->owner)) {
    --- a/drivers/pci/pci.c
    +++ b/drivers/pci/pci.c
    @@ -1358,6 +1358,7 @@ pci_set_dma_mask(struct pci_dev *dev, u6
    return -EIO;

    dev->dma_mask = mask;
    + printk(KERN_DEBUG "%s() '%s' %p %016lx\n",__func__,dev->dev.bus_id,dev->dev.dma_mask,*(dev->dev.dma_mask));

    return 0;
    }
    --- a/drivers/pci/probe.c
    +++ b/drivers/pci/probe.c
    @@ -937,6 +937,7 @@ void pci_device_add(struct pci_dev *dev,

    set_dev_node(&dev->dev, pcibus_to_node(bus));
    dev->dev.dma_mask = &dev->dma_mask;
    + printk(KERN_DEBUG "%s() '%s' %p %016lx\n",__func__,dev->dev.bus_id,dev->dev.dma_mask,*(dev->dev.dma_mask));
    dev->dev.coherent_dma_mask = 0xffffffffull;

    /* Fix up broken headers */
    --- a/include/asm-powerpc/dma-mapping.h
    +++ b/include/asm-powerpc/dma-mapping.h
    @@ -92,6 +92,7 @@ static inline int dma_set_mask(struct de
    {
    struct dma_mapping_ops *dma_ops = get_dma_ops(dev);

    + printk(KERN_DEBUG "%s() '%s' %016llx %p\n",__func__,dev->bus_id,(unsigned long long)dma_mask,dma_ops);
    if (unlikely(dma_ops == NULL))
    return -EIO;
    if (dma_ops->set_dma_mask != NULL)
    Using PowerMac machine description
    Page orders: linear mapping = 24, virtual = 12, io = 12
    Found initrd at 0xc000000001500000:0xc000000001763000
    Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x32
    Mapped at 0xd000080080000000
    Found a K2 mac-io controller, rev: 32, mapped at 0xd000080080041000
    PowerMac motherboard: PowerMac G5
    DART: table not allocated, using direct DMA
    Starting Linux PPC64 #4 SMP Mon Aug 6 15:40:01 CEST 2007
    -----------------------------------------------------
    ppc64_pft_size = 0x0
    physicalMemorySize = 0x10000000
    ppc64_caches.dcache_line_size = 0x80
    ppc64_caches.icache_line_size = 0x80
    htab_address = 0xc00000000f800000
    htab_hash_mask = 0x7fff
    -----------------------------------------------------
    Linux version 2.6.22.1-ppc64 (geeko@buildhost) (gcc version 4.1.2 20070115 (prerelease) (SUSE Linux)) #4 SMP Mon Aug 6 15:40:01 CEST 2007
    [boot]0012 Setup Arch
    Top of RAM: 0x10000000, Total RAM: 0x10000000
    Memory hole size: 0MB
    Entering add_active_range(0, 0, 65536) 0 entries of 256 used
    Found U3-AGP PCI host bridge. Firmware bus number: 240->255
    Can't get bus-range for /ht@0,f2000000, assume bus 0
    Found U3-HT PCI host bridge. Firmware bus number: 0->239
    PCI Host 0, io start: 400000; io end: bfffff
    PCI Host 1, io start: 0; io end: 3fffff
    via-pmu: Server Mode is disabled
    PMU driver v2 initialized for Core99, firmware: 0c
    nvram: Checking bank 0...
    nvram: gen0=493, gen1=492
    nvram: Active bank is: 0
    nvram: OF partition at 0x410
    nvram: XP partition at 0x1020
    nvram: NR partition at 0x1120
    Zone PFN ranges:
    DMA 0 -> 65536
    Normal 65536 -> 65536
    early_node_map[1] active PFN ranges
    0: 0 -> 65536
    On node 0 totalpages: 65536
    DMA zone: 896 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 64640 pages, LIFO batch:15
    Normal zone: 0 pages used for memmap
    [boot]0015 Setup Done
    Built 1 zonelists. Total pages: 64640
    Kernel command line:
    mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
    mpic: ISU size: 120, shift: 7, mask: 7f
    mpic: Initializing for 120 sources
    mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs
    mpic: ISU size: 120, shift: 7, mask: 7f
    mpic: Initializing for 120 sources
    PID hash table entries: 1024 (order: 10, 8192 bytes)
    time_init: decrementer frequency = 33.333333 MHz
    time_init: processor frequency = 1600.000000 MHz
    Console: colour dummy device 80x25
    console handover: boot [udbg0] -> real [tty0]
    Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
    freeing bootmem node 0
    Memory: 242692k/262144k available (5920k kernel code, 19452k reserved, 1384k data, 1103k bss, 292k init)
    Calibrating delay loop... 66.56 BogoMIPS (lpj=332800)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 256
    PowerMac SMP probe found 1 cpus
    Brought up 1 CPUs
    NET: Registered protocol family 16
    KeyWest i2c @0xf8001003 irq 42 /u3@0,f8000000/i2c@f8001000
    channel 0 bus <multibus>
    channel 1 bus <multibus>
    KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000
    channel 0 bus <multibus>
    PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c
    channel 1 bus <multibus>
    channel 2 bus <multibus>
    CPU Hotplug not supported by firmware - disabling.
    PCI: Probing PCI hardware
    pci_device_add() '0000:f0:0b.0' c000000001978860 00000000ffffffff
    pci_device_add() '0000:f0:10.0' c00000000ff41860 00000000ffffffff
    pci_device_add() '0001:00:01.0' c00000000ff41060 0000000000000000
    pci_device_add() '0001:06:03.0' c00000000ff47860 0000000000000000
    pci_device_add() '0001:00:02.0' c00000000ff47060 0000000000000000
    Can't get ranges for PCI-PCI bridge /ht@0,f2000000/pci@2
    pci_device_add() '0001:00:03.0' c00000000ff48860 0000000000000000
    pci_device_add() '0001:01:07.0' c00000000ff48060 0000000000000000
    pci_device_add() '0001:01:08.0' c00000000ff4b860 0000000000000000
    pci_device_add() '0001:01:09.0' c00000000ff4b060 0000000000000000
    pci_device_add() '0001:00:04.0' c00000000ff6c860 0000000000000000
    pci_device_add() '0001:02:0b.0' c00000000ff6c060 0000000000000000
    pci_device_add() '0001:02:0b.1' c00000000ff6d860 0000000000000000
    pci_device_add() '0001:02:0b.2' c00000000ff6d060 0000000000000000
    pci_device_add() '0001:00:05.0' c00000000ff6e860 0000000000000000
    pci_device_add() '0001:03:0d.0' c00000000ff6e060 0000000000000000
    pci_device_add() '0001:03:0e.0' c00000000ff71860 0000000000000000
    pci_device_add() '0001:00:06.0' c00000000ff71060 0000000000000000
    pci_device_add() '0001:04:0f.0' c00000000ff72860 0000000000000000
    pci_device_add() '0001:00:07.0' c00000000ff72060 0000000000000000
    pci_device_add() '0001:05:0c.0' c00000000ff73860 0000000000000000
    mapping IO f0000000 -> d000080000400000, size: 800000
    mapping IO f4000000 -> d000080000000000, size: 400000
    PCI: Probing PCI hardware done
    Registering pmac pic with sysfs...
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    NET: Registered protocol family 2
    IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
    TCP established hash table entries: 8192 (order: 5, 196608 bytes)
    TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 8192 bind 8192)
    TCP reno registered
    Unpacking initramfs... done
    Freeing initrd memory: 2444k freed
    nvram_init: Could not find nvram partition for nvram buffered error logging.
    rtas_flash: no firmware flash support
    IBM eBus Device Driver
    Registering G5 CPU frequency driver
    Frequency method: i2c/pfunc, Voltage method: i2c/pfunc
    Low: 1301 Mhz, High: 1600 Mhz, Cur: 1600 MHz
    audit: initializing netlink socket (disabled)
    audit(1186407931.610:1): initialized
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
    rpadlpar_io_init: partition not DLPAR capable
    nvidiafb: Device ID: 10de0321
    nvidiafb: CRTC0 analog not found
    nvidiafb: CRTC1 analog found
    nvidiafb: EDID found from BUS1
    i2c-adapter i2c-1: unable to read EDID block.
    i2c-adapter i2c-1: unable to read EDID block.
    i2c-adapter i2c-1: unable to read EDID block.
    nvidiafb: Found OF EDID for head 2
    nvidiafb: EDID found from BUS2
    nvidiafb: CRTC 1appears to have a CRT attached
    nvidiafb: Using CRT on CRTC 1
    Trying to im_free nonexistent area (d0000800800c1000)
    Console: switching to colour frame buffer device 160x64
    nvidiafb: PCI nVidia NV32 framebuffer (64MB @ 0xA8000000)
    vio_register_driver: driver hvc_console registering
    HVSI: registered 0 devices
    Generic RTC Driver v1.07
    pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
    ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
    ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
    MacIO PCI driver attached to K2 chipset
    input: Macintosh mouse button emulation as /class/input/input0
    PowerMac G5 Thermal control driver 1.3
    adb: starting probe task...
    adb: finished probe task...
    Detected fan controls:
    0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN
    1: RPM fan, id 2, location: DRIVE BAY
    2: PWM fan, id 2, location: SLOT,PCI FAN
    3: RPM fan, id 3, location: CPU A INTAKE
    4: RPM fan, id 4, location: CPU A EXHAUST
    5: RPM fan, id 5, location: CPU B INTAKE
    6: RPM fan, id 6, location: CPU B EXHAUST
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    PCI: Enabling device: (0001:03:0d.0), cmd 16
    ide0: Found Apple K2 ATA-6 controller, bus ID 3, irq 39
    Probing IDE interface ide0...
    hda: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive
    hda: Enabling Ultra DMA 2
    ide0 at 0xd00008008729a000-0xd00008008729a007,0xd00008008729a160 on irq 39
    PCI: Enabling device: (0001:02:0b.2), cmd 6
    ehci_hcd 0001:02:0b.2: EHCI Host Controller
    ehci_hcd 0001:02:0b.2: new USB bus registered, assigned bus number 1
    ehci_hcd 0001:02:0b.2: irq 63, io mem 0x80100000
    ehci_hcd 0001:02:0b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: new device found, idVendor=0000, idProduct=0000
    usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 2.6.22.1-ppc64 ehci_hcd
    usb usb1: SerialNumber: 0001:02:0b.2
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 5 ports detected
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    PCI: Enabling device: (0001:01:08.0), cmd 2
    ohci_hcd 0001:01:08.0: OHCI Host Controller
    ohci_hcd 0001:01:08.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0001:01:08.0: irq 27, io mem 0x80081000
    usb usb2: new device found, idVendor=0000, idProduct=0000
    usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: OHCI Host Controller
    usb usb2: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd
    usb usb2: SerialNumber: 0001:01:08.0
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    PCI: Enabling device: (0001:01:09.0), cmd 2
    ohci_hcd 0001:01:09.0: OHCI Host Controller
    ohci_hcd 0001:01:09.0: new USB bus registered, assigned bus number 3
    ohci_hcd 0001:01:09.0: irq 28, io mem 0x80080000
    usb usb3: new device found, idVendor=0000, idProduct=0000
    usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: OHCI Host Controller
    usb usb3: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd
    usb usb3: SerialNumber: 0001:01:09.0
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    PCI: Enabling device: (0001:02:0b.0), cmd 2
    ohci_hcd 0001:02:0b.0: OHCI Host Controller
    ohci_hcd 0001:02:0b.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0001:02:0b.0: irq 63, io mem 0x80102000
    usb usb4: new device found, idVendor=0000, idProduct=0000
    usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: OHCI Host Controller
    usb usb4: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd
    usb usb4: SerialNumber: 0001:02:0b.0
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 3 ports detected
    PCI: Enabling device: (0001:02:0b.1), cmd 2
    ohci_hcd 0001:02:0b.1: OHCI Host Controller
    ohci_hcd 0001:02:0b.1: new USB bus registered, assigned bus number 5
    ohci_hcd 0001:02:0b.1: irq 63, io mem 0x80101000
    usb usb5: new device found, idVendor=0000, idProduct=0000
    usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb5: Product: OHCI Host Controller
    usb usb5: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd
    usb usb5: SerialNumber: 0001:02:0b.1
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    mice: PS/2 mouse device common for all mice
    PowerMac i2c bus pmu 2 registered
    PowerMac i2c bus pmu 1 registered
    PowerMac i2c bus mac-io 0 registered
    PowerMac i2c bus u3 1 registered
    PowerMac i2c bus u3 0 registered
    FCU Initialized, RPM fan shift is 3
    usb 5-2: new full speed USB device using ohci_hcd and address 2
    usb 5-2: new device found, idVendor=05ac, idProduct=1003
    usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 5-2: Product: Hub in Apple Extended USB Keyboard
    usb 5-2: Manufacturer: Mitsumi Electric
    usb 5-2: configuration #1 chosen from 1 choice
    hub 5-2:1.0: USB hub found
    hub 5-2:1.0: 3 ports detected
    usb 5-2.1: new low speed USB device using ohci_hcd and address 3
    usb 5-2.1: new device found, idVendor=05ac, idProduct=0307
    usb 5-2.1: new device strings: Mfr=1, Product=2, SerialNumber=0
    usb 5-2.1: Product: Apple Optical USB Mouse
    usb 5-2.1: Manufacturer: Logitech
    usb 5-2.1: configuration #1 chosen from 1 choice
    usb 5-2.3: new full speed USB device using ohci_hcd and address 4
    usb 5-2.3: new device found, idVendor=05ac, idProduct=020c
    usb 5-2.3: new device strings: Mfr=1, Product=3, SerialNumber=0
    usb 5-2.3: Product: Apple Extended USB Keyboard
    usb 5-2.3: Manufacturer: Mitsumi Electric
    usb 5-2.3: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver hiddev
    input: Logitech Apple Optical USB Mouse as /class/input/input1
    input: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0001:02:0b.1-2.1
    input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input2
    input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.1-2.3
    input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input3
    input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.1-2.3
    usbcore: registered new interface driver usbhid
    /dev/shm/R/linux-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    oprofile: using ppc64/970 performance monitoring.
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    NET: Registered protocol family 15
    input: PMU as /class/input/input4
    Registered led device: pmu-front-led
    Freeing unused kernel memory: 292k freed
    SCSI subsystem initialized
    libata version 3.00 loaded.
    sata_svw 0001:05:0c.0: version 2.2
    pci_set_dma_mask() '0001:05:0c.0' c00000000ff73860 00000000ffffffff
    scsi0 : sata_svw
    scsi1 : sata_svw
    scsi2 : sata_svw
    scsi3 : sata_svw
    ata1: SATA max UDMA/133 cmd 0xd0000800872a1000 ctl 0xd0000800872a1020 bmdma 0xd0000800872a1030 irq 16
    ata2: SATA max UDMA/133 cmd 0xd0000800872a1100 ctl 0xd0000800872a1120 bmdma 0xd0000800872a1130 irq 16
    ata3: SATA max UDMA/133 cmd 0xd0000800872a1200 ctl 0xd0000800872a1220 bmdma 0xd0000800872a1230 irq 16
    ata4: SATA max UDMA/133 cmd 0xd0000800872a1300 ctl 0xd0000800872a1320 bmdma 0xd0000800872a1330 irq 16
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-6: ST380013AS, 3.05, max UDMA/133
    ata1.00: 156301488 sectors, multi 0: LBA48
    ata1.00: configured for UDMA/133
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ATA-7: Maxtor 6Y080M0, YAR511W0, max UDMA/133
    ata2.00: 156312576 sectors, multi 0: LBA
    ata2.00: configured for UDMA/133
    ata3: SATA link down (SStatus 4 SControl 300)
    ata4: SATA link down (SStatus 4 SControl 300)
    scsi 0:0:0:0: Direct-Access ATA ST380013AS 3.05 PQ: 0 ANSI: 5
    scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
    sd 0:0:0:0: [sda] Attached SCSI disk
    sd 1:0:0:0: [sdb] 156312576 512-byte hardware sectors (80032 MB)
    sd 1:0:0:0: [sdb] Write Protect is off
    sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 1:0:0:0: [sdb] 156312576 512-byte hardware sectors (80032 MB)
    sd 1:0:0:0: [sdb] Write Protect is off
    sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
    sd 1:0:0:0: [sdb] Attached SCSI disk
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda8, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 1:0:0:0: Attached scsi generic sg1 type 0
    Linux agpgart interface v0.102 (c) Dave Jones
    agpgart: Detected Apple U3 chipset
    agpgart: configuring for size idx: 8
    agpgart: AGP aperture is 32M @ 0x0
    tg3.c:v3.77 (May 31, 2007)
    PCI: Enabling device: (0001:06:03.0), cmd 6
    hda: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    snd-aoa-fabric-layout: found bus with layout 36
    snd-aoa-fabric-layout: Using PMF GPIOs
    snd-aoa-codec-tas: found 'deq' node
    snd-aoa-fabric-layout: can use this codec
    snd-aoa-codec-tas: tas found, addr 0x35 on /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a
    pci_set_dma_mask() '0001:06:03.0' c00000000ff47860 ffffffffffffffff
    eth0: Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:64-bit) 10/100/1000Base-T Ethernet 00:04:76:f3:c2:4f
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[0]
    eth0: dma_rwctrl[76ff2d0f] dma_mask[64-bit]
    sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
    pci_set_dma_mask() '0001:04:0f.0' c00000000ff72860 00000000ffffffff
    PHY ID: 2062e0, addr: 1
    eth1: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:a6:5d:66
    eth1: Found BCM5421-K2 PHY
    pci_set_dma_mask() '0001:03:0e.0' c00000000ff71860 00000000ffffffff
    PCI: Enabling device: (0001:03:0e.0), cmd 2
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[80200000-802007ff] Max Packet=[4096] IR/IT contexts=[8/8]
    Adding 1023992k swap on /dev/sdb3. Priority:-1 extents:1 across:1023992k
    device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
    ieee1394: Node added: ID:BUS[0-00:1023] GUID[0010100305179115]
    ieee1394: Host added: ID:BUS[0-01:1023] GUID[000a95fffea65d66]
    sbp2_alloc_device():778 dev 'fw-host0' 0000000000000000 parent '0001:03:0e.0' c00000000ff71860 00000000ffffffff
    dma_set_mask() '0001:03:0e.0' 00000000ffffffff c0000000005fee68
    scsi4 : SBP-2 IEEE-1394
    loop: module loaded
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    REISERFS (device sdb4): found reiserfs format "3.6" with standard journal
    REISERFS (device sdb4): using ordered data mode
    reiserfs: using flush barriers
    REISERFS (device sdb4): journal params: device sdb4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    REISERFS (device sdb4): checking transaction log (sdb4)
    REISERFS (device sdb4): Using r5 hash to sort names
    eth1: Link is up at 100 Mbps, full-duplex.
    AppArmor: AppArmor initialized<5>audit(1186407949.200:2): info="AppArmor initialized" pid=1871
    fuse init (API version 7.8)
    ieee1394: sbp2: Logged into SBP-2 device
    ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048]
    scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-85JS F100 PQ: 0 ANSI: 0
    scsi 4:0:0:0: Attached scsi generic sg2 type 5
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
    sr 4:0:0:0: Attached scsi CD-ROM sr0
    audit(1186407951.229:3): operation="file_lock" requested_mask="k" denied_mask="k" name="/var/run/klogd.pid" pid=1949 profile="/sbin/klogd"
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    Mobile IPv6
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    ip_tables: (C) 2000-2006 Netfilter Core Team
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
    eth1: Link is up at 100 Mbps, full-duplex.
    eth1: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
    audit(1186407961.889:4): operation="file_lock" requested_mask="k" denied_mask="k" name="/var/run/klogd.pid" pid=3061 profile="/sbin/klogd"
    audit(1186407962.979:5): audit_pid=3113 old=0 by auid=4294967295
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/
    \
     
     \ /
      Last update: 2007-08-06 15:53    [W:0.056 / U:1.892 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site