lkml.org 
[lkml]   [2007]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [2.6.23-rc3 possible regression] 8250 claims nonexisting device blocking IO port
Date
On Tuesday 21 August 2007, Bjorn Helgaas wrote:
> On Tuesday 21 August 2007 12:28:49 pm Andrey Borzenkov wrote:
> > On Monday 20 August 2007, Bjorn Helgaas wrote:
> > > On Monday 20 August 2007 10:28:22 am Andrey Borzenkov wrote:
> > > > This worked in 2.6.22 with the same quirks. I will test without later
> > > > but I fail to see how they are related.
> > >
> > > OK, let me know what happens. The way it's related is that the quirk
> > > fiddles with the IRDA device, and it probably changes the SIR config
> > > so that it starts responding at the ttyS3 address.
> >
> > You are probably right. Disabling quirk makes it work again (with pnp off
> > in smsc-ircc2 of course).
>
> I think pnp is off in smsc-ircc2 by default, right?
>
> > Hmm ... is there any reason why this quirk is in PnP core in the first
> > place? Would not it be more logical to have it in (PnP) part of
> > smsc-ircc2? This way it could share code with legacy detection; and it
> > even may have chance to work - assuming BIOS is aware that 0x100 is
> > claimed by PCMCIA it could allocate different port when we try to
> > activate device after that ... should I give it a try?
>
> I agree it would make sense to put the quirk in smsc-ircc2, since
> we only need it if we want to use the smsc-ircc2 driver. But I don't
> think we have a mechanism for calling quirks at module load-time, so
> it has to be part of the static kernel. And we don't have anything
> like DECLARE_PCI_FIXUP_SECTION, so it really has to be in quirks.c for
> now.
>
> How does the following patch look?
>

I am fine with any patch that works. Of course, it would be better to fix 8250
to respect PnP (it does load 8250_pnp in the first place).

Thank you

>
>
> PNP: remove SMCf010 quirk
>
> If the quirk enables the SIR part of the SMCf010 device, the 8250 driver
> may claim it as a legacy ttyS device, which makes the legacy probe in the
> smsc-ircc2 driver fail.
>
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
>
> Index: w/drivers/pnp/quirks.c
> ===================================================================
> --- w.orig/drivers/pnp/quirks.c 2007-08-21 12:34:51.000000000 -0600
> +++ w/drivers/pnp/quirks.c 2007-08-21 12:35:08.000000000 -0600
> @@ -107,108 +107,6 @@
> "pnp: SB audio device quirk - increasing port range\n");
> }
>
> -static int quirk_smc_fir_enabled(struct pnp_dev *dev)
> -{
> - unsigned long firbase;
> - u8 bank, high, low, chip;
> -
> - if (!pnp_port_valid(dev, 1))
> - return 0;
> -
> - firbase = pnp_port_start(dev, 1);
> -
> - /* Select register bank 3 */
> - bank = inb(firbase + 7);
> - bank &= 0xf0;
> - bank |= 3;
> - outb(bank, firbase + 7);
> -
> - high = inb(firbase + 0);
> - low = inb(firbase + 1);
> - chip = inb(firbase + 2);
> -
> - /* This corresponds to the check in smsc_ircc_present() */
> - if (high == 0x10 && low == 0xb8 && (chip == 0xf1 || chip == 0xf2))
> - return 1;
> -
> - return 0;
> -}
> -
> -static void quirk_smc_enable(struct pnp_dev *dev)
> -{
> - struct resource fir, sir, irq;
> -
> - pnp_activate_dev(dev);
> - if (quirk_smc_fir_enabled(dev))
> - return;
> -
> - /*
> - * Sometimes the BIOS claims the device is enabled, but it reports
> - * the wrong FIR resources or doesn't properly configure ISA or LPC
> - * bridges on the way to the device.
> - *
> - * HP nc6000 and nc8000/nw8000 laptops have known problems like
> - * this. Fortunately, they do fix things up if we auto-configure
> - * the device using its _PRS and _SRS methods.
> - */
> - dev_err(&dev->dev, "%s not responding at SIR 0x%lx, FIR 0x%lx; "
> - "auto-configuring\n", dev->id->id,
> - (unsigned long)pnp_port_start(dev, 0),
> - (unsigned long)pnp_port_start(dev, 1));
> -
> - pnp_disable_dev(dev);
> - pnp_init_resource_table(&dev->res);
> - pnp_auto_config_dev(dev);
> - pnp_activate_dev(dev);
> - if (quirk_smc_fir_enabled(dev)) {
> - dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n",
> - (unsigned long)pnp_port_start(dev, 0),
> - (unsigned long)pnp_port_start(dev, 1));
> - return;
> - }
> -
> - /*
> - * The Toshiba Portege 4000 _CRS reports the FIR region first,
> - * followed by the SIR region. The BIOS will configure the bridge,
> - * but only if we call _SRS with SIR first, then FIR. It also
> - * reports the IRQ as active high, when it is really active low.
> - */
> - dev_err(&dev->dev, "not responding at SIR 0x%lx, FIR 0x%lx; "
> - "swapping SIR/FIR and reconfiguring\n",
> - (unsigned long)pnp_port_start(dev, 0),
> - (unsigned long)pnp_port_start(dev, 1));
> -
> - /*
> - * Clear IORESOURCE_AUTO so pnp_activate_dev() doesn't reassign
> - * these resources any more.
> - */
> - fir = dev->res.port_resource[0];
> - sir = dev->res.port_resource[1];
> - fir.flags &= ~IORESOURCE_AUTO;
> - sir.flags &= ~IORESOURCE_AUTO;
> -
> - irq = dev->res.irq_resource[0];
> - irq.flags &= ~IORESOURCE_AUTO;
> - irq.flags &= ~IORESOURCE_BITS;
> - irq.flags |= IORESOURCE_IRQ_LOWEDGE;
> -
> - pnp_disable_dev(dev);
> - dev->res.port_resource[0] = sir;
> - dev->res.port_resource[1] = fir;
> - dev->res.irq_resource[0] = irq;
> - pnp_activate_dev(dev);
> -
> - if (quirk_smc_fir_enabled(dev)) {
> - dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n",
> - (unsigned long)pnp_port_start(dev, 0),
> - (unsigned long)pnp_port_start(dev, 1));
> - return;
> - }
> -
> - dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\" and "
> - "email bjorn.helgaas@hp.com\n");
> -}
> -
> /*
> * PnP Quirks
> * Cards or devices that need some tweaking due to incomplete resource
> info @@ -229,7 +127,6 @@
> {"CTL0043", quirk_sb16audio_resources},
> {"CTL0044", quirk_sb16audio_resources},
> {"CTL0045", quirk_sb16audio_resources},
> - {"SMCf010", quirk_smc_enable},
> {""}
> };


[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2007-08-24 19:45    [W:0.057 / U:2.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site