lkml.org 
[lkml]   [2007]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ACPI: boot correctly with "nosmp" or "maxcpus=0"
Date
From: Len Brown <len.brown@intel.com>

In MPS mode, "nosmp" and "maxcpus=0" boot a UP kernel with IOAPIC disabled.
However, in ACPI mode, these parameters didn't completely disable
the IO APIC initialization code and boot failed.

init/main.c:
Disable the IO_APIC if "nosmp" or "maxcpus=0"
undefine disable_ioapic_setup() when it doesn't apply.

i386:
delete ioapic_setup(), it was a duplicate of parse_noapic()
delete undefinition of disable_ioapic_setup()

x86_64:
rename disable_ioapic_setup() to parse_noapic() to match i386
define disable_ioapic_setup() in header to match i386

http://bugzilla.kernel.org/show_bug.cgi?id=1641

Signed-off-by: Len Brown <len.brown@intel.com>
---
Documentation/kernel-parameters.txt | 15 ++++++---------
arch/i386/kernel/io_apic.c | 8 --------
arch/x86_64/kernel/io_apic.c | 8 +++-----
include/asm-i386/io_apic.h | 1 -
include/asm-x86_64/io_apic.h | 6 ++++++
init/main.c | 12 ++++++++++--
6 files changed, 25 insertions(+), 25 deletions(-)

Index: linus/Documentation/kernel-parameters.txt
===================================================================
--- linus.orig/Documentation/kernel-parameters.txt
+++ linus/Documentation/kernel-parameters.txt
@@ -952,14 +952,10 @@ and is between 256 and 4096 characters.
Format: <1-256>

maxcpus= [SMP] Maximum number of processors that an SMP kernel
- should make use of.
- Using "nosmp" or "maxcpus=0" will disable SMP
- entirely (the MPS table probe still happens, though).
- A command-line option of "maxcpus=<NUM>", where <NUM>
- is an integer greater than 0, limits the maximum number
- of CPUs activated in SMP mode to <NUM>.
- Using "maxcpus=1" on an SMP kernel is the trivial
- case of an SMP kernel with only one CPU.
+ should make use of. maxcpus=n : n >= 0 limits the
+ kernel to using 'n' processors. n=0 is a special case,
+ it is equivalent to "nosmp", which also disables
+ the IO APIC.

max_addr=[KMG] [KNL,BOOT,ia64] All physical memory greater than or
equal to this physical address is ignored.
@@ -1184,7 +1180,8 @@ and is between 256 and 4096 characters.

nosep [BUGS=X86-32] Disables x86 SYSENTER/SYSEXIT support.

- nosmp [SMP] Tells an SMP kernel to act as a UP kernel.
+ nosmp [SMP] Tells an SMP kernel to act as a UP kernel,
+ and disable the IO APIC. legacy for "maxcpus=0".

nosoftlockup [KNL] Disable the soft-lockup detector.

Index: linus/arch/i386/kernel/io_apic.c
===================================================================
--- linus.orig/arch/i386/kernel/io_apic.c
+++ linus/arch/i386/kernel/io_apic.c
@@ -754,14 +754,6 @@ static int pirq_entries [MAX_PIRQS];
static int pirqs_enabled;
int skip_ioapic_setup;

-static int __init ioapic_setup(char *str)
-{
- skip_ioapic_setup = 1;
- return 1;
-}
-
-__setup("noapic", ioapic_setup);
-
static int __init ioapic_pirq_setup(char *str)
{
int i, max;
Index: linus/arch/x86_64/kernel/io_apic.c
===================================================================
--- linus.orig/arch/x86_64/kernel/io_apic.c
+++ linus/arch/x86_64/kernel/io_apic.c
@@ -397,14 +397,12 @@ static void clear_IO_APIC (void)
int skip_ioapic_setup;
int ioapic_force;

-/* dummy parsing: see setup.c */
-
-static int __init disable_ioapic_setup(char *str)
+static int __init parse_noapic(char *str)
{
- skip_ioapic_setup = 1;
+ disable_ioapic_setup();
return 0;
}
-early_param("noapic", disable_ioapic_setup);
+early_param("noapic", parse_noapic);

/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
static int __init disable_timer_pin_setup(char *arg)
Index: linus/include/asm-i386/io_apic.h
===================================================================
--- linus.orig/include/asm-i386/io_apic.h
+++ linus/include/asm-i386/io_apic.h
@@ -150,7 +150,6 @@ extern int (*ioapic_renumber_irq)(int io

#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
-static inline void disable_ioapic_setup(void) { }
#endif

#endif
Index: linus/include/asm-x86_64/io_apic.h
===================================================================
--- linus.orig/include/asm-x86_64/io_apic.h
+++ linus/include/asm-x86_64/io_apic.h
@@ -109,6 +109,12 @@ extern int mpc_default_type;
/* 1 if "noapic" boot option passed */
extern int skip_ioapic_setup;

+static inline void disable_ioapic_setup(void)
+{
+ skip_ioapic_setup = 1;
+}
+
+
/*
* If we use the IO-APIC for IRQ routing, disable automatic
* assignment of PCI IRQ's.
Index: linus/init/main.c
===================================================================
--- linus.orig/init/main.c
+++ linus/init/main.c
@@ -146,9 +146,14 @@ static unsigned int __initdata max_cpus
* greater than 0, limits the maximum number of CPUs activated in
* SMP mode to <NUM>.
*/
+#ifndef CONFIG_X86_IO_APIC
+static inline void disable_ioapic_setup(void) {};
+#endif
+
static int __init nosmp(char *str)
{
max_cpus = 0;
+ disable_ioapic_setup();
return 0;
}

@@ -157,10 +162,13 @@ early_param("nosmp", nosmp);
static int __init maxcpus(char *str)
{
get_option(&str, &max_cpus);
- return 1;
+ if (max_cpus == 0)
+ disable_ioapic_setup();
+
+ return 0;
}

-__setup("maxcpus=", maxcpus);
+early_param("maxcpus=", maxcpus);
#else
#define max_cpus NR_CPUS
#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2007-08-16 09:35    [W:0.104 / U:0.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site