lkml.org 
[lkml]   [2007]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH]hpet and rtc max_user_freq predefine in Kconfig
I think users should be able to set max_user_freq values for rtc and
hpet during kernel configuration. The default value is set to 1024
with this patch.
The default value of 64 is really too small for modern multimedia apps.
Besides, this patch fixes link on intel hpet spec.


Signed-off-by: Milinevsky Dmitry <niam.niam@gmail.com>

diff -Nupar linux-2.6.22-cfs-19/drivers/char/hpet.c
linux-2.6.22-cfs-19.niam/drivers/char/hpet.c
--- linux-2.6.22-cfs-19/drivers/char/hpet.c 2007-07-10 20:57:20.000000000 +0300
+++ linux-2.6.22-cfs-19.niam/drivers/char/hpet.c 2007-08-02
01:34:54.000000000 +0300
@@ -44,9 +44,9 @@
/*
* The High Precision Event Timer driver.
* This driver is closely modelled after the rtc.c driver.
- * http://www.intel.com/hardwaredesign/hpetspec.htm
+ * http://www.intel.com/technology/architecture/hpetspec.htm
*/
-#define HPET_USER_FREQ (64)
+#define HPET_USER_FREQ (CONFIG_HPET_MAX_USER_FREQ)
#define HPET_DRIFT (500)

#define HPET_RANGE_SIZE 1024 /* from HPET spec */
diff -Nupar linux-2.6.22-cfs-19/drivers/char/Kconfig
linux-2.6.22-cfs-19.niam/drivers/char/Kconfig
--- linux-2.6.22-cfs-19/drivers/char/Kconfig 2007-07-10 20:57:15.000000000 +0300
+++ linux-2.6.22-cfs-19.niam/drivers/char/Kconfig 2007-08-02
01:33:33.000000000 +0300
@@ -791,6 +791,13 @@ config RTC
To compile this driver as a module, choose M here: the
module will be called rtc.

+config RTC_MAX_USER_FREQ
+ int "User interrupt frequency"
+ depends on RTC
+ default "1024"
+ help
+ Default value of user interrupt frequency(/proc/sys/dev/rtc/max-user-freq).
+
config SGI_DS1286
tristate "SGI DS1286 RTC support"
depends on SGI_IP22
@@ -1022,6 +1029,13 @@ config HPET
open selects one of the timers supported by the HPET. The timers are
non-periodic and/or periodic.

+config HPET_MAX_USER_FREQ
+ int "User interrupt frequency"
+ depends on HPET
+ default "1024"
+ help
+ Default value of user interrupt frequency(/proc/sys/dev/hpet/max-user-freq).
+
config HPET_RTC_IRQ
bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
default n
diff -Nupar linux-2.6.22-cfs-19/drivers/char/rtc.c
linux-2.6.22-cfs-19.niam/drivers/char/rtc.c
--- linux-2.6.22-cfs-19/drivers/char/rtc.c 2007-07-10 20:57:15.000000000 +0300
+++ linux-2.6.22-cfs-19.niam/drivers/char/rtc.c 2007-08-02
01:33:48.000000000 +0300
@@ -191,7 +191,7 @@ static int rtc_proc_open(struct inode *i
static unsigned long rtc_status = 0; /* bitmapped status byte. */
static unsigned long rtc_freq = 0; /* Current periodic IRQ rate */
static unsigned long rtc_irq_data = 0; /* our output to the world */
-static unsigned long rtc_max_user_freq = 64; /* > this, need
CAP_SYS_RESOURCE */
+static unsigned long rtc_max_user_freq = CONFIG_RTC_MAX_USER_FREQ; /*
> this, need CAP_SYS_RESOURCE */

#ifdef RTC_IRQ
/*
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2007-08-02 01:31    [W:0.027 / U:5.824 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site