lkml.org 
[lkml]   [2007]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10] drivers/block/cpqarray.c: better error handling and kmalloc + memset conversion to k[cz]alloc
Date
This patch removes some redundant casts, does the kmalloc + memset to k[cz]alloc conversion
and it changes the error path to use goto (to avoid code duplication).

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

drivers/block/cpqarray.c | 49567 -> 48623 (-944 bytes)
drivers/block/cpqarray.o | 178820 -> 178288 (-532 bytes)

drivers/block/cpqarray.c | 78 ++++++++++++-------------------------
1 file changed, 26 insertions(+), 52 deletions(-)

--- linux-2.6.23-rc1-mm1-a/drivers/block/cpqarray.c 2007-07-26 13:07:41.000000000 +0200
+++ linux-2.6.23-rc1-mm1-b/drivers/block/cpqarray.c 2007-07-31 12:59:54.000000000 +0200
@@ -420,18 +420,17 @@ static int __init cpqarray_register_ctlr
goto Enomem2;
}

- hba[i]->cmd_pool = (cmdlist_t *)pci_alloc_consistent(
+ hba[i]->cmd_pool = pci_alloc_consistent(
hba[i]->pci_dev, NR_CMDS * sizeof(cmdlist_t),
&(hba[i]->cmd_pool_dhandle));
- hba[i]->cmd_pool_bits = kmalloc(
- ((NR_CMDS+BITS_PER_LONG-1)/BITS_PER_LONG)*sizeof(unsigned long),
+ hba[i]->cmd_pool_bits = kcalloc(
+ (NR_CMDS+BITS_PER_LONG-1)/BITS_PER_LONG, sizeof(unsigned long),
GFP_KERNEL);

if (!hba[i]->cmd_pool_bits || !hba[i]->cmd_pool)
goto Enomem1;

memset(hba[i]->cmd_pool, 0, NR_CMDS * sizeof(cmdlist_t));
- memset(hba[i]->cmd_pool_bits, 0, ((NR_CMDS+BITS_PER_LONG-1)/BITS_PER_LONG)*sizeof(unsigned long));
printk(KERN_INFO "cpqarray: Finding drives on %s",
hba[i]->devname);

@@ -1660,45 +1659,30 @@ static void getgeometry(int ctlr)

info_p->log_drv_map = 0;

- id_ldrive = kmalloc(sizeof(id_log_drv_t), GFP_KERNEL);
- if(id_ldrive == NULL)
- {
+ id_ldrive = kzalloc(sizeof(id_log_drv_t), GFP_KERNEL);
+ if (!id_ldrive) {
printk( KERN_ERR "cpqarray: out of memory.\n");
- return;
+ goto err_0;
}

- id_ctlr_buf = kmalloc(sizeof(id_ctlr_t), GFP_KERNEL);
- if(id_ctlr_buf == NULL)
- {
- kfree(id_ldrive);
+ id_ctlr_buf = kzalloc(sizeof(id_ctlr_t), GFP_KERNEL);
+ if (!id_ctlr_buf) {
printk( KERN_ERR "cpqarray: out of memory.\n");
- return;
+ goto err_1;
}

- id_lstatus_buf = kmalloc(sizeof(sense_log_drv_stat_t), GFP_KERNEL);
- if(id_lstatus_buf == NULL)
- {
- kfree(id_ctlr_buf);
- kfree(id_ldrive);
+ id_lstatus_buf = kzalloc(sizeof(sense_log_drv_stat_t), GFP_KERNEL);
+ if (!id_lstatus_buf) {
printk( KERN_ERR "cpqarray: out of memory.\n");
- return;
+ goto err_2;
}

- sense_config_buf = kmalloc(sizeof(config_t), GFP_KERNEL);
- if(sense_config_buf == NULL)
- {
- kfree(id_lstatus_buf);
- kfree(id_ctlr_buf);
- kfree(id_ldrive);
+ sense_config_buf = kzalloc(sizeof(config_t), GFP_KERNEL);
+ if (!sense_config_buf) {
printk( KERN_ERR "cpqarray: out of memory.\n");
- return;
+ goto err_3;
}

- memset(id_ldrive, 0, sizeof(id_log_drv_t));
- memset(id_ctlr_buf, 0, sizeof(id_ctlr_t));
- memset(id_lstatus_buf, 0, sizeof(sense_log_drv_stat_t));
- memset(sense_config_buf, 0, sizeof(config_t));
-
info_p->phys_drives = 0;
info_p->log_drv_map = 0;
info_p->drv_assign_map = 0;
@@ -1712,13 +1696,8 @@ static void getgeometry(int ctlr)
* so the idastubopen will fail on all logical drives
* on the controller.
*/
- /* Free all the buffers and return */
printk(KERN_ERR "cpqarray: error sending ID controller\n");
- kfree(sense_config_buf);
- kfree(id_lstatus_buf);
- kfree(id_ctlr_buf);
- kfree(id_ldrive);
- return;
+ goto err_4;
}

info_p->log_drives = id_ctlr_buf->nr_drvs;
@@ -1764,12 +1743,7 @@ static void getgeometry(int ctlr)
" failed to report status of logical drive %d\n"
"Access to this controller has been disabled\n",
ctlr, log_unit);
- /* Free all the buffers and return */
- kfree(sense_config_buf);
- kfree(id_lstatus_buf);
- kfree(id_ctlr_buf);
- kfree(id_ldrive);
- return;
+ goto err_4;
}
/*
Make sure the logical drive is configured
@@ -1798,14 +1772,8 @@ static void getgeometry(int ctlr)
sizeof(config_t), 0, 0, log_unit);
if (ret_code == IO_ERROR) {
info_p->log_drv_map = 0;
- /* Free all the buffers and return */
printk(KERN_ERR "cpqarray: error sending sense config\n");
- kfree(sense_config_buf);
- kfree(id_lstatus_buf);
- kfree(id_ctlr_buf);
- kfree(id_ldrive);
- return;
-
+ goto err_4;
}

info_p->phys_drives =
@@ -1820,12 +1788,18 @@ static void getgeometry(int ctlr)
log_index = log_index + 1;
} /* end of if logical drive configured */
} /* end of for log_unit */
+
+ /* Free all the buffers and return */
+err_4:
kfree(sense_config_buf);
- kfree(id_ldrive);
+err_3:
kfree(id_lstatus_buf);
+err_2:
kfree(id_ctlr_buf);
+err_1:
+ kfree(id_ldrive);
+err_0:
return;
-
}

static void __exit cpqarray_exit(void)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2007-07-31 19:15    [W:0.406 / U:51.840 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site