lkml.org 
[lkml]   [2007]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[GIT PULL try#4] Blackfin update
From
Date
Hi Linus,

Please pull from 'for-linus' branch of

master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6.git for-linus

to receive the following updates:

arch/blackfin/Makefile | 4 ++
arch/blackfin/kernel/dma-mapping.c | 3 +-
arch/blackfin/kernel/setup.c | 5 +--
arch/blackfin/kernel/traps.c | 2 +-
arch/blackfin/kernel/vmlinux.lds.S | 16 +++++---
arch/blackfin/mach-bf561/head.S | 10 ++--
arch/blackfin/mach-common/cacheinit.S | 3 +
arch/blackfin/mach-common/ints-priority-dc.c | 39 ++++++++++--------
arch/blackfin/mach-common/ints-priority-sc.c | 48 +++++++++++++---------
drivers/i2c/busses/Kconfig | 4 +-
drivers/input/serio/Kconfig | 2 +-
drivers/net/bfin_mac.c | 6 ++-
drivers/rtc/rtc-bfin.c | 2 +-
include/asm-blackfin/bfin-global.h | 1 +
include/asm-blackfin/mach-bf548/cdefBF54x_base.h | 33 +++++++++++++++
include/asm-blackfin/mach-bf548/irq.h | 1 +
include/asm-blackfin/mach-bf561/cdefBF561.h | 6 +++
include/asm-blackfin/mach-bf561/defBF561.h | 4 ++
include/asm-blackfin/thread_info.h | 12 +++---
19 files changed, 136 insertions(+), 65 deletions(-)

Bernd Schmidt (3):
Blackfin arch: Load P0 before storing through it
Blackfin arch: fix bug which unaligns the init thread's stack and causes the current macro to fail.
Blackfin arch: Initialize the exception vectors early in the boot process

Bryan Wu (2):
Blackfin arch: fix a compiling warning about dma-mapping
Blackfin arch: add BF54x I2C/TWI TWI0 driver support

Michael Hennerich (3):
Blackfin arch: add error message when IRQ no available
Blackfin Ethernet MAC driver: fix bug Report returned -ENOMEM upwards (in case L1/uncached memory alloc fails)
Input Serio: Blackfin doesnt support I8042 - make sure it doesnt get selected

Mike Frysinger (5):
Blackfin arch: setup aliases for some core Core A MMRs
Blackfin arch: use bfin_read_SWRST() now that BF561 provides it
Blackfin arch: add selections for BF544 and BF542
Blackfin arch: switch to using proper defines this time THREAD_SIZE and PAGE_SIZE instead of just PAGE_SIZE everywhere
Blackfin On-Chip RTC driver update for supporting BF54x

Sonic Zhang (1):
Blackfin arch: fix KGDB bug, dont forget last parameter.

diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 1b75672..2084166 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -24,6 +24,8 @@ machine-$(CONFIG_BF533) := bf533
machine-$(CONFIG_BF534) := bf537
machine-$(CONFIG_BF536) := bf537
machine-$(CONFIG_BF537) := bf537
+machine-$(CONFIG_BF542) := bf548
+machine-$(CONFIG_BF544) := bf548
machine-$(CONFIG_BF548) := bf548
machine-$(CONFIG_BF549) := bf548
machine-$(CONFIG_BF561) := bf561
@@ -36,6 +38,8 @@ cpu-$(CONFIG_BF533) := bf533
cpu-$(CONFIG_BF534) := bf534
cpu-$(CONFIG_BF536) := bf536
cpu-$(CONFIG_BF537) := bf537
+cpu-$(CONFIG_BF542) := bf542
+cpu-$(CONFIG_BF544) := bf544
cpu-$(CONFIG_BF548) := bf548
cpu-$(CONFIG_BF549) := bf549
cpu-$(CONFIG_BF561) := bf561
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index ea48d5b..94d7b11 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -160,7 +160,8 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
BUG_ON(direction == DMA_NONE);

for (i = 0; i < nents; i++, sg++) {
- sg->dma_address = page_address(sg->page) + sg->offset;
+ sg->dma_address = (dma_addr_t)(page_address(sg->page) +
+ sg->offset);

invalidate_dcache_range(sg_dma_address(sg),
sg_dma_address(sg) +
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index f59dcee..88f221b 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -402,11 +402,7 @@ void __init setup_arch(char **cmdline_p)
if (l1_length > L1_DATA_A_LENGTH)
panic("L1 data memory overflow\n");

-#ifdef BF561_FAMILY
- _bfin_swrst = bfin_read_SICA_SWRST();
-#else
_bfin_swrst = bfin_read_SWRST();
-#endif

/* Copy atomic sequences to their fixed location, and sanity check that
these locations are the ones that we advertise to userspace. */
@@ -429,6 +425,7 @@ void __init setup_arch(char **cmdline_p)
BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
!= ATOMIC_XOR32 - FIXED_CODE_START);

+ init_exception_vectors();
bf53x_cache_init();
}

diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 3909f5b..8766bd6 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -140,7 +140,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
#ifdef CONFIG_KGDB
# define CHK_DEBUGGER_TRAP() \
do { \
- CHK_DEBUGGER(trapnr, sig, info.si_code, fp); \
+ CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \
} while (0)
# define CHK_DEBUGGER_TRAP_MAYBE() \
do { \
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index d06f860..fb53780 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -32,6 +32,7 @@
#include <asm-generic/vmlinux.lds.h>
#include <asm/mem_map.h>
#include <asm/page.h>
+#include <asm/thread_info.h>

OUTPUT_FORMAT("elf32-bfin")
ENTRY(__start)
@@ -64,8 +65,12 @@ SECTIONS

.data :
{
- . = ALIGN(PAGE_SIZE);
+ /* make sure the init_task is aligned to the
+ * kernel thread size so we can locate the kernel
+ * stack properly and quickly.
+ */
__sdata = .;
+ . = ALIGN(THREAD_SIZE);
*(.data.init_task)
DATA_DATA
CONSTRUCTORS
@@ -73,14 +78,14 @@ SECTIONS
. = ALIGN(32);
*(.data.cacheline_aligned)

- . = ALIGN(PAGE_SIZE);
+ . = ALIGN(THREAD_SIZE);
__edata = .;
}

- . = ALIGN(PAGE_SIZE);
___init_begin = .;
.init :
{
+ . = ALIGN(PAGE_SIZE);
__sinittext = .;
*(.init.text)
__einittext = .;
@@ -153,10 +158,9 @@ SECTIONS
__ebss_b_l1 = .;
}

- . = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
- ___init_end = ALIGN(PAGE_SIZE);
+ ___init_end = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);

- .bss ___init_end :
+ .bss LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1) :
{
. = ALIGN(4);
___bss_start = .;
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index 2f08bcb..38650a6 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -440,15 +440,15 @@ ENTRY(_bfin_reset)
SSYNC;

/* make sure SYSCR is set to use BMODE */
- P0.h = hi(SICA_SYSCR);
- P0.l = lo(SICA_SYSCR);
- R0.l = 0x20;
+ P0.h = hi(SYSCR);
+ P0.l = lo(SYSCR);
+ R0.l = 0x20; /* on BF561, disable core b */
W[P0] = R0.l;
SSYNC;

/* issue a system soft reset */
- P1.h = hi(SICA_SWRST);
- P1.l = lo(SICA_SWRST);
+ P1.h = hi(SWRST);
+ P1.l = lo(SWRST);
R1.l = 0x0007;
W[P1] = R1;
SSYNC;
diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S
index 9d47562..5be6b97 100644
--- a/arch/blackfin/mach-common/cacheinit.S
+++ b/arch/blackfin/mach-common/cacheinit.S
@@ -60,6 +60,9 @@ ENDPROC(_bfin_write_IMEM_CONTROL)

#if defined(CONFIG_BLKFIN_DCACHE)
ENTRY(_bfin_write_DMEM_CONTROL)
+ P0.l = (DMEM_CONTROL & 0xFFFF);
+ P0.h = (DMEM_CONTROL >> 16);
+
CLI R1;
SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
.align 8;
diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c
index 6b9fd03..660f881 100644
--- a/arch/blackfin/mach-common/ints-priority-dc.c
+++ b/arch/blackfin/mach-common/ints-priority-dc.c
@@ -358,26 +358,10 @@ static void bf561_demux_gpio_irq(unsigned int inta_irq,

#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */

-/*
- * This function should be called during kernel startup to initialize
- * the BFin IRQ handling routines.
- */
-int __init init_arch_irq(void)
+void __init init_exception_vectors(void)
{
- int irq;
- unsigned long ilat = 0;
- /* Disable all the peripheral intrs - page 4-29 HW Ref manual */
- bfin_write_SICA_IMASK0(SIC_UNMASK_ALL);
- bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
SSYNC();

- bfin_write_SICA_IWR0(IWR_ENABLE_ALL);
- bfin_write_SICA_IWR1(IWR_ENABLE_ALL);
-
- local_irq_disable();
-
- init_exception_buff();
-
#ifndef CONFIG_KGDB
bfin_write_EVT0(evt_emulation);
#endif
@@ -395,6 +379,27 @@ int __init init_arch_irq(void)
bfin_write_EVT14(evt14_softirq);
bfin_write_EVT15(evt_system_call);
CSYNC();
+}
+
+/*
+ * This function should be called during kernel startup to initialize
+ * the BFin IRQ handling routines.
+ */
+int __init init_arch_irq(void)
+{
+ int irq;
+ unsigned long ilat = 0;
+ /* Disable all the peripheral intrs - page 4-29 HW Ref manual */
+ bfin_write_SICA_IMASK0(SIC_UNMASK_ALL);
+ bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
+ SSYNC();
+
+ bfin_write_SICA_IWR0(IWR_ENABLE_ALL);
+ bfin_write_SICA_IWR1(IWR_ENABLE_ALL);
+
+ local_irq_disable();
+
+ init_exception_buff();

for (irq = 0; irq <= SYS_IRQS; irq++) {
if (irq <= IRQ_CORETMR)
diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c
index 28a878c..4708023 100644
--- a/arch/blackfin/mach-common/ints-priority-sc.c
+++ b/arch/blackfin/mach-common/ints-priority-sc.c
@@ -579,8 +579,12 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
u16 gpionr = irq - IRQ_PA0;
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];

- if (pint_val == IRQ_NOT_AVAIL)
+ if (pint_val == IRQ_NOT_AVAIL) {
+ printk(KERN_ERR
+ "GPIO IRQ %d :Not in PINT Assign table "
+ "Reconfigure Interrupt to Port Assignemt\n", irq);
return -ENODEV;
+ }

if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
ret = gpio_request(gpionr, NULL);
@@ -713,6 +717,29 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq,
}
#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */

+void __init init_exception_vectors(void)
+{
+ SSYNC();
+
+#ifndef CONFIG_KGDB
+ bfin_write_EVT0(evt_emulation);
+#endif
+ bfin_write_EVT2(evt_evt2);
+ bfin_write_EVT3(trap);
+ bfin_write_EVT5(evt_ivhw);
+ bfin_write_EVT6(evt_timer);
+ bfin_write_EVT7(evt_evt7);
+ bfin_write_EVT8(evt_evt8);
+ bfin_write_EVT9(evt_evt9);
+ bfin_write_EVT10(evt_evt10);
+ bfin_write_EVT11(evt_evt11);
+ bfin_write_EVT12(evt_evt12);
+ bfin_write_EVT13(evt_evt13);
+ bfin_write_EVT14(evt14_softirq);
+ bfin_write_EVT15(evt_system_call);
+ CSYNC();
+}
+
/*
* This function should be called during kernel startup to initialize
* the BFin IRQ handling routines.
@@ -733,29 +760,10 @@ int __init init_arch_irq(void)
bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
bfin_write_SIC_IWR(IWR_ENABLE_ALL);
#endif
-
SSYNC();

local_irq_disable();

-#ifndef CONFIG_KGDB
- bfin_write_EVT0(evt_emulation);
-#endif
- bfin_write_EVT2(evt_evt2);
- bfin_write_EVT3(trap);
- bfin_write_EVT5(evt_ivhw);
- bfin_write_EVT6(evt_timer);
- bfin_write_EVT7(evt_evt7);
- bfin_write_EVT8(evt_evt8);
- bfin_write_EVT9(evt_evt9);
- bfin_write_EVT10(evt_evt10);
- bfin_write_EVT11(evt_evt11);
- bfin_write_EVT12(evt_evt12);
- bfin_write_EVT13(evt_evt13);
- bfin_write_EVT14(evt14_softirq);
- bfin_write_EVT15(evt_system_call);
- CSYNC();
-
#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && defined(CONFIG_BF54x)
#ifdef CONFIG_PINTx_REASSIGN
pint[0]->assign = CONFIG_PINT0_ASSIGN;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index da16478..1842f52 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -92,9 +92,9 @@ config I2C_AU1550

config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
- depends on BF534 || BF536 || BF537
+ depends on BF534 || BF536 || BF537 || BF54x
help
- This is the TWI I2C device driver for Blackfin 534/536/537.
+ This is the TWI I2C device driver for Blackfin 534/536/537/54x.
This driver can also be built as a module. If so, the module
will be called i2c-bfin-twi.

diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index adef447..5ce632c 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -21,7 +21,7 @@ if SERIO
config SERIO_I8042
tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
default y
- depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K
+ depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BFIN
---help---
i8042 is the chip over which the standard AT keyboard and PS/2
mouse are connected to the computer. If you use these devices,
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 9a08d65..2bb97d4 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -798,6 +798,7 @@ static void bf537mac_shutdown(struct net_device *dev)
*/
static int bf537mac_open(struct net_device *dev)
{
+ int retval;
pr_debug("%s: %s\n", dev->name, __FUNCTION__);

/*
@@ -811,7 +812,10 @@ static int bf537mac_open(struct net_device *dev)
}

/* initial rx and tx list */
- desc_list_init();
+ retval = desc_list_init();
+
+ if (retval)
+ return retval;

bf537mac_setphy(dev);
setup_system_regs(dev);
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index 260ead9..1aa709d 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -1,6 +1,6 @@
/*
* Blackfin On-Chip Real Time Clock Driver
- * Supports BF531/BF532/BF533/BF534/BF536/BF537
+ * Supports BF53[123]/BF53[467]/BF54[2489]
*
* Copyright 2004-2007 Analog Devices Inc.
*
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index c4d6cbb..a970781 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -61,6 +61,7 @@ extern void bfin_dcache_init(void);
extern int read_iloc(void);
extern int bfin_console_init(void);
extern asmlinkage void lower_to_irq14(void);
+extern void init_exception_vectors(void);
extern void init_dma(void);
extern void program_IAR(void);
extern void evt14_softirq(void);
diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
index 98d35a9..cdf29e7 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
@@ -242,6 +242,39 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
#define bfin_read_TWI0_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16)
#define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val)

+#define bfin_read_TWI_CLKDIV() bfin_read16(TWI0_CLKDIV)
+#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI0_CLKDIV, val)
+#define bfin_read_TWI_CONTROL() bfin_read16(TWI0_CONTROL)
+#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI0_CONTROL, val)
+#define bfin_read_TWI_SLAVE_CTRL() bfin_read16(TWI0_SLAVE_CTRL)
+#define bfin_write_TWI_SLAVE_CTRL(val) bfin_write16(TWI0_SLAVE_CTRL, val)
+#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI0_SLAVE_STAT)
+#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI0_SLAVE_STAT, val)
+#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI0_SLAVE_ADDR)
+#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI0_SLAVE_ADDR, val)
+#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI0_MASTER_CTRL)
+#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI0_MASTER_CTRL, val)
+#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI0_MASTER_STAT)
+#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI0_MASTER_STAT, val)
+#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI0_MASTER_ADDR)
+#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI0_MASTER_ADDR, val)
+#define bfin_read_TWI_INT_STAT() bfin_read16(TWI0_INT_STAT)
+#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI0_INT_STAT, val)
+#define bfin_read_TWI_INT_MASK() bfin_read16(TWI0_INT_MASK)
+#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI0_INT_MASK, val)
+#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI0_FIFO_CTRL)
+#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI0_FIFO_CTRL, val)
+#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI0_FIFO_STAT)
+#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI0_FIFO_STAT, val)
+#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI0_XMT_DATA8)
+#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI0_XMT_DATA8, val)
+#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI0_XMT_DATA16)
+#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI0_XMT_DATA16, val)
+#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI0_RCV_DATA8)
+#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI0_RCV_DATA8, val)
+#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16)
+#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val)
+
/* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */

/* SPORT1 Registers */
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h
index 0b3325b..e548d3c 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/include/asm-blackfin/mach-bf548/irq.h
@@ -112,6 +112,7 @@ Events (highest priority) EMU 0
#define IRQ_ATAPI_TX BFIN_IRQ(44) /* ATAPI TX (DMA11) Interrupt */
#define IRQ_TWI0 BFIN_IRQ(45) /* TWI0 Interrupt */
#define IRQ_TWI1 BFIN_IRQ(46) /* TWI1 Interrupt */
+#define IRQ_TWI IRQ_TWI0 /* TWI Interrupt */
#define IRQ_CAN0_RX BFIN_IRQ(47) /* CAN0 Receive Interrupt */
#define IRQ_CAN0_TX BFIN_IRQ(48) /* CAN0 Transmit Interrupt */
#define IRQ_MDMAS2 BFIN_IRQ(49) /* MDMA Stream 2 Interrupt */
diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h
index 1a8ec9e..6e87ab2 100644
--- a/include/asm-blackfin/mach-bf561/cdefBF561.h
+++ b/include/asm-blackfin/mach-bf561/cdefBF561.h
@@ -81,6 +81,12 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val)
#define bfin_read_CHIPID() bfin_read32(CHIPID)

+/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
+#define bfin_read_SWRST() bfin_read_SICA_SWRST()
+#define bfin_write_SWRST() bfin_write_SICA_SWRST()
+#define bfin_read_SYSCR() bfin_read_SICA_SYSCR()
+#define bfin_write_SYSCR() bfin_write_SICA_SYSCR()
+
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
#define bfin_read_SICA_SWRST() bfin_read16(SICA_SWRST)
#define bfin_write_SICA_SWRST(val) bfin_write16(SICA_SWRST,val)
diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h
index 89150ec..0f2dc6e 100644
--- a/include/asm-blackfin/mach-bf561/defBF561.h
+++ b/include/asm-blackfin/mach-bf561/defBF561.h
@@ -52,6 +52,10 @@
#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */
#define CHIPID 0xFFC00014 /* Chip ID Register */

+/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
+#define SWRST SICA_SWRST
+#define SYSCR SICA_SYSCR
+
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
#define SICA_SWRST 0xFFC00100 /* Software Reset register */
#define SICA_SYSCR 0xFFC00104 /* System Reset Configuration register */
diff --git a/include/asm-blackfin/thread_info.h b/include/asm-blackfin/thread_info.h
index fa8f08c..34d3c2e 100644
--- a/include/asm-blackfin/thread_info.h
+++ b/include/asm-blackfin/thread_info.h
@@ -39,6 +39,11 @@
*/
#define ALIGN_PAGE_MASK 0xffffe000

+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#define THREAD_SIZE 8192 /* 2 pages */
+
#ifndef __ASSEMBLY__

typedef unsigned long mm_segment_t;
@@ -76,11 +81,6 @@ struct thread_info {
#define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack)

-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#define THREAD_SIZE 8192 /* 2 pages */
-
/* How to get the thread information struct from C */

static inline struct thread_info *current_thread_info(void)
@@ -94,7 +94,7 @@ static inline struct thread_info *current_thread_info(void)
struct thread_info *ti;
__asm__("%0 = sp;": "=&d"(ti):
);
- return (struct thread_info *)((long)ti & ~8191UL);
+ return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1));
}

/* thread information allocation */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2007-07-27 10:51    [W:0.051 / U:3.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site