lkml.org 
[lkml]   [2007]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: sata_nv: 2.6.22 is not fixed, but certainly improved
Robert Hancock wrote:
> Can you post the output you got from the reset on 2.6.22?

It's one of these:

ata4: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000
status 0x400 next cpb count 0x0 next cpb idx 0x0
ata4: CPB 0: ctl_flags 0x9, resp_flags 0x0
ata4: timeout waiting for ADMA IDLE, stat=0x400
ata4: timeout waiting for ADMA LEGACY, stat=0x400
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata4.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata4: soft resetting port
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/133
ata4: EH complete
sd 5:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA

Essentially the controller has been given a command (a cache flush,
which for whatever reason seems to cause this frequently) but it doesn't
give any indication that it has done anything with it (CPB response
flags remain at 0). There have been a few reports of this, and I'm at a
loss to explain why it happens. Certainly the publicly known information
on this controller doesn't seem to give any hints on what if anything we
could be doing wrong.

A workaround was added in sata_nv a while back that adds a delay between
completion of an NCQ command and issuing of a non-NCQ command, or vice
versa. This seems to have improved things (for unknown reasons), but
hasn't entirely fixed the problem. If your drive has NCQ support, it may
be a remaining case of this problem.

I've previously asked for info on this issue from NVIDIA (as well as
Jeff Garzik who has access to the controller documentation), but haven't
gotten any info yet. Consider this another ping :-)

--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-07-17 08:09    [W:0.031 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site