lkml.org 
[lkml]   [2007]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [2.6.20.15] CK804 / sata_nv: Reported link speed not as expected.
koan wrote:
> Hello, I am not on list so please CC me with any responses.
>
> I recently switched to an nforce4 board and have been looking over my
> dmesg output for any oddities. This is a Slackware 12.0 machine with a
> custom 2.6.20.15 kernel.
>
> As far as I know, the motherboard is an Nforce4 based (non-ultra/sli,
> etc) board. The exact model is Foxconn (Winfast) NF4K8AB-RS (
> http://www.foxconnchannel.com/EN-US/Product/motherboard_detail.aspx?ID=en-gb0000027
>
> ). It has the latest BIOS available applied.
>
> The product documentation states the board only supports 4x SATA150
> connectors and that seems to match the information on this page (
> http://www.nvidia.com/page/nforce4_family.html ). Three of the disks
> are Seagate drives and have the SATA150 clip jumper set. However when
> I boot, the kernel output seems to show 2 of the 4 ports operating at
> 3 Gbps. Is this a known issue and/or something I can safely ignore?

I don't think the NVIDIA page is correct. AFAIK all nForce4 chipsets
support SATA 3Gbps transfer speeds.

The kernel doesn't have any control over the default speed chosen by the
controller in any case (though it can force it down to a lower speed).

--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-07-13 07:23    [W:1.161 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site