Messages in this thread | | | From | "Ingo Korb" <> | Date | Sun, 03 Jun 2007 22:08:08 +0200 | Subject | stallion driver dmesg notice |
| |
Hi!
The stallion driver in 2.6.21.3 put this little notice in my dmesg:
=== Cut === Stallion Multiport Serial Driver: version 5.6.0 stallion 0000:00:0b.0: please, report this to LKML: 100b/d001/ffffff ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 17 stallion: probe of 0000:00:0b.0 failed with error -16 === Cut ===
The card is a EC8/32-PCI with a single connected panel. It used to work well with 2.4, mostly well with a patched 2.6.8.1, really bad (unstable, lost characters) with 2.6.11(?) and doesn't work at all with 2.6.21.3.
Should I test it with an EC8/64-PCI? The /32 (ab)uses an IDE controller chip as PCI interface, the /64 uses a PLX PCI9050.
lspci -vv for the EC8/32: === Cut === 00:0b.0 Class ffff: National Semiconductor Corporation 87410 IDE (rev ff) (prog-if ff) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at d100 [size=8] Region 1: I/O ports at d200 [size=4] Region 2: I/O ports at d300 [size=8] Region 3: I/O ports at d400 [size=4] === Cut ===
-ik
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |