lkml.org 
[lkml]   [2007]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
Subject2.6.21-rt9 problem : xruns
From
Hi,

I've recently compiled a "vanilla" 2.6.21 kernel, patched with Ingo Molnar's
rt-8 patch, as I was unable to compile with rt-7.

I needed it because I'm using audio applications (tests were made with
FrugalWare, but I don't think it's a distro issue).

Everything was allright until I changed my motherboard for an Asrock
4coreDual-Vsta (I formerly used a Nforce4 one), with VIA PT880 Ultra chipset.

I've justed switched the hardware, as Linux is neat enough to boot without
having to reinstall the whole OS.

Since, I get tons of xruns when using RT applications, and the only solution
I've found to "fix" it was to disable ACPI at boot time.
Moreover, I get this message at boot time :
PCI: BIOS bug: MCFG area@e0000000 is not E820 reserved
PCI: not using MMCONFIG

I've also tested this hardware setup with a UbuntoStudio kernel (2.6.19),
and everything works flawlessy (no XRUNS, no kernel messages) !

So here is my question (I'd like to understand what's happening) :
- is it a kernel (or patch) issue ?
- is it a bad chipset support in the latest kernel versions ?
- could this be related to BIOS issues only (I've tried all available
versions without any change) ?
- should I use special settings in the ".config" in order to avoid these
problems ?

I wasn't able to detect what causes these XRUNS, so if anyone has clues ...

Regards
skb





-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-06-29 13:53    [W:0.038 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site