lkml.org 
[lkml]   [2007]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PXA27x UDC driver.
On Thu, Jun 28, 2007 at 02:53:22PM -0700, David Brownell wrote:
>
> Let's start with *JUST* a driver, not trying to update everything
> else in the USB Gadget stack so that it looks like it's designed
> specifically to handle all of Intel's design botches related to
> endpoint config ... and work worse for essentially everything else.
>
> (Unlike pretty much every other vendor, Intel wanted hardware config
> management. It was unusably buggy in pxa21x/25x/26x, and not much
> better in pxa27x.)
>
>
> So in technical terms, and to repeat what I've said before: just
> configure it to act more like a PXA 25x chip (no altsettings) and
> get it so it passes all the tests [1], modulo errata which have no
> workarounds ... then submit that. No epautoconfig updates, no
> patches to every gadget driver to cope with updated autoconfig.

This looks interesting... as you alredy told this driver derives from
an older one, I just maintained it till now.

If I well understand I should remove usb_ep_autoconfig() and program
into the controller only one (the default) configuration. Is that
right?

Currently I tested the driver only with ether gadget, but if I do as
above, should I get the driver working with all gadgets automagically?
:)

Thanks a lot,

Rodolfo

--

GNU/Linux Solutions e-mail: giometti@enneenne.com
Linux Device Driver giometti@gnudd.com
Embedded Systems giometti@linux.it
UNIX programming phone: +39 349 2432127
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-06-29 10:59    [W:0.255 / U:0.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site