Messages in this thread | | | Date | Thu, 28 Jun 2007 18:00:31 -0400 (EDT) | From | Steven Rostedt <> | Subject | Re: [RFC PATCH 0/6] Convert all tasklets to workqueues |
| |
On Thu, 28 Jun 2007, Dan Williams wrote:
> > CONFIG_PREEMPT? > > > Everything thus far has been CONFIG_PREEMPT=n (the default for this platform). > > With CONFIG_PREEMPT=y the resync is back in the 50MB/s range.
So with upping the prio for the work queue you got back your performance?
> > [iop-adma: hi-prio workqueue, CONFIG_PREEMPT=y] > iq81340mc:~# cat /proc/mdstat > Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] > md0 : active raid5 sdd[4] sdc[2] sdb[1] sda[0] > 468872448 blocks level 5, 64k chunk, algorithm 2 [4/3] [UUU_] > [=>...................] recovery = 5.8% (9136404/156290816) > finish=46.1min speed=53161K/sec > > The tasklet configuration stays in 50MB/s ballpark, and the default > priority (nice -5) workqueue case remains in the 30's with > CONFIG_PREEMPT=n.
[noted: should be CONFIG_PREEMPT=y]
This is expected. Seems you may have otherthings running at a higher prio.
-- Steve
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |