lkml.org 
[lkml]   [2007]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RFC] hwbkpt: Hardware breakpoints (was Kwatch)
Roland:

Here's the next iteration. The arch-specific parts are now completely
encapsulated. validate_settings is in a form which should be workable
on all architectures. And the address, length, and type are passed as
arguments to register_{kernel,user}_hw_breakpoint().

I changed the Kprobes single-step routine along the lines you
suggested, but added a little extra. See what you think.

I haven't tried to modify Kconfig at all. To do it properly would
require making ptrace configurable, which is not something I want to
tackle at the moment.

The test for early termination of the exception handler is now back the
way it was. However I didn't change the test for deciding whether to
send a SIGTRAP. Under the current circumstances I don't see how it
could ever be wrong. (On the other hand, the code will end up calling
send_sigtrap() twice when a ptrace exception occurs: once in the ptrace
trigger routine and once in do_debug. That won't matter will it? I
would expect send_sigtrap() to be idempotent.)

Are you going to the Ottawa Linux Symposium?

Alan Stern



Index: usb-2.6/include/asm-i386/hw_breakpoint.h
===================================================================
--- /dev/null
+++ usb-2.6/include/asm-i386/hw_breakpoint.h
@@ -0,0 +1,49 @@
+#ifndef _I386_HW_BREAKPOINT_H
+#define _I386_HW_BREAKPOINT_H
+
+#ifdef __KERNEL__
+#define __ARCH_HW_BREAKPOINT_H
+
+struct arch_hw_breakpoint {
+ unsigned long address;
+ u8 len;
+ u8 type;
+} __attribute__((packed));
+
+#include <asm-generic/hw_breakpoint.h>
+
+/* HW breakpoint accessor routines */
+static inline const void *hw_breakpoint_get_kaddress(struct hw_breakpoint *bp)
+{
+ return (const void *) bp->info.address;
+}
+
+static inline const void __user *hw_breakpoint_get_uaddress(
+ struct hw_breakpoint *bp)
+{
+ return (const void __user *) bp->info.address;
+}
+
+static inline unsigned hw_breakpoint_get_len(struct hw_breakpoint *bp)
+{
+ return bp->info.len;
+}
+
+static inline unsigned hw_breakpoint_get_type(struct hw_breakpoint *bp)
+{
+ return bp->info.type;
+}
+
+/* Available HW breakpoint length encodings */
+#define HW_BREAKPOINT_LEN_1 0x40
+#define HW_BREAKPOINT_LEN_2 0x44
+#define HW_BREAKPOINT_LEN_4 0x4c
+#define HW_BREAKPOINT_LEN_EXECUTE 0x40
+
+/* Available HW breakpoint type encodings */
+#define HW_BREAKPOINT_EXECUTE 0x80 /* trigger on instruction execute */
+#define HW_BREAKPOINT_WRITE 0x81 /* trigger on memory write */
+#define HW_BREAKPOINT_RW 0x83 /* trigger on memory read or write */
+
+#endif /* __KERNEL__ */
+#endif /* _I386_HW_BREAKPOINT_H */
Index: usb-2.6/arch/i386/kernel/process.c
===================================================================
--- usb-2.6.orig/arch/i386/kernel/process.c
+++ usb-2.6/arch/i386/kernel/process.c
@@ -57,6 +57,7 @@

#include <asm/tlbflush.h>
#include <asm/cpu.h>
+#include <asm/debugreg.h>

asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");

@@ -376,9 +377,10 @@ EXPORT_SYMBOL(kernel_thread);
*/
void exit_thread(void)
{
+ struct task_struct *tsk = current;
+
/* The process may have allocated an io port bitmap... nuke it. */
if (unlikely(test_thread_flag(TIF_IO_BITMAP))) {
- struct task_struct *tsk = current;
struct thread_struct *t = &tsk->thread;
int cpu = get_cpu();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
@@ -396,15 +398,17 @@ void exit_thread(void)
tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
put_cpu();
}
+ if (unlikely(tsk->thread.hw_breakpoint_info))
+ flush_thread_hw_breakpoint(tsk);
}

void flush_thread(void)
{
struct task_struct *tsk = current;

- memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8);
- memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
- clear_tsk_thread_flag(tsk, TIF_DEBUG);
+ memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
+ if (unlikely(tsk->thread.hw_breakpoint_info))
+ flush_thread_hw_breakpoint(tsk);
/*
* Forget coprocessor state..
*/
@@ -447,14 +451,21 @@ int copy_thread(int nr, unsigned long cl

savesegment(gs,p->thread.gs);

+ p->thread.hw_breakpoint_info = NULL;
+ p->thread.io_bitmap_ptr = NULL;
+
tsk = current;
+ err = -ENOMEM;
+ if (unlikely(tsk->thread.hw_breakpoint_info)) {
+ if (copy_thread_hw_breakpoint(tsk, p, clone_flags))
+ goto out;
+ }
+
if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
p->thread.io_bitmap_ptr = kmemdup(tsk->thread.io_bitmap_ptr,
IO_BITMAP_BYTES, GFP_KERNEL);
- if (!p->thread.io_bitmap_ptr) {
- p->thread.io_bitmap_max = 0;
- return -ENOMEM;
- }
+ if (!p->thread.io_bitmap_ptr)
+ goto out;
set_tsk_thread_flag(p, TIF_IO_BITMAP);
}

@@ -484,7 +495,8 @@ int copy_thread(int nr, unsigned long cl

err = 0;
out:
- if (err && p->thread.io_bitmap_ptr) {
+ if (err) {
+ flush_thread_hw_breakpoint(p);
kfree(p->thread.io_bitmap_ptr);
p->thread.io_bitmap_max = 0;
}
@@ -496,18 +508,18 @@ int copy_thread(int nr, unsigned long cl
*/
void dump_thread(struct pt_regs * regs, struct user * dump)
{
- int i;
+ struct task_struct *tsk = current;

/* changed the size calculations - should hopefully work better. lbt */
dump->magic = CMAGIC;
dump->start_code = 0;
dump->start_stack = regs->esp & ~(PAGE_SIZE - 1);
- dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
- dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT;
+ dump->u_tsize = ((unsigned long) tsk->mm->end_code) >> PAGE_SHIFT;
+ dump->u_dsize = ((unsigned long) (tsk->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT;
dump->u_dsize -= dump->u_tsize;
dump->u_ssize = 0;
- for (i = 0; i < 8; i++)
- dump->u_debugreg[i] = current->thread.debugreg[i];
+
+ dump_thread_hw_breakpoint(tsk, dump->u_debugreg);

if (dump->start_stack < TASK_SIZE)
dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
@@ -557,16 +569,6 @@ static noinline void __switch_to_xtra(st

next = &next_p->thread;

- if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
- set_debugreg(next->debugreg[0], 0);
- set_debugreg(next->debugreg[1], 1);
- set_debugreg(next->debugreg[2], 2);
- set_debugreg(next->debugreg[3], 3);
- /* no 4 and 5 */
- set_debugreg(next->debugreg[6], 6);
- set_debugreg(next->debugreg[7], 7);
- }
-
if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
/*
* Disable the bitmap via an invalid offset. We still cache
@@ -699,7 +701,7 @@ struct task_struct fastcall * __switch_t
set_iopl_mask(next->iopl);

/*
- * Now maybe handle debug registers and/or IO bitmaps
+ * Now maybe handle IO bitmaps
*/
if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW)
|| test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)))
@@ -731,6 +733,13 @@ struct task_struct fastcall * __switch_t

x86_write_percpu(current_task, next_p);

+ /*
+ * Handle debug registers. This must be done _after_ current
+ * is updated.
+ */
+ if (unlikely(test_tsk_thread_flag(next_p, TIF_DEBUG)))
+ switch_to_thread_hw_breakpoint(next_p);
+
return prev_p;
}

Index: usb-2.6/arch/i386/kernel/signal.c
===================================================================
--- usb-2.6.orig/arch/i386/kernel/signal.c
+++ usb-2.6/arch/i386/kernel/signal.c
@@ -591,13 +591,6 @@ static void fastcall do_signal(struct pt

signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
- /* Reenable any watchpoints before delivering the
- * signal to user space. The processor register will
- * have been cleared if the watchpoint triggered
- * inside the kernel.
- */
- if (unlikely(current->thread.debugreg[7]))
- set_debugreg(current->thread.debugreg[7], 7);

/* Whee! Actually deliver the signal. */
if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
Index: usb-2.6/arch/i386/kernel/traps.c
===================================================================
--- usb-2.6.orig/arch/i386/kernel/traps.c
+++ usb-2.6/arch/i386/kernel/traps.c
@@ -804,62 +804,44 @@ fastcall void __kprobes do_int3(struct p
*/
fastcall void __kprobes do_debug(struct pt_regs * regs, long error_code)
{
- unsigned int condition;
struct task_struct *tsk = current;
+ unsigned long dr6;

- get_debugreg(condition, 6);
+ get_debugreg(dr6, 6);
+ set_debugreg(0, 6); /* DR6 may or may not be cleared by the CPU */

- if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
- SIGTRAP) == NOTIFY_STOP)
+ /* Store the virtualized DR6 value */
+ tsk->thread.vdr6 = dr6;
+
+ if (notify_die(DIE_DEBUG, "debug", regs, dr6, error_code,
+ SIGTRAP) == NOTIFY_STOP)
return;
+
/* It's safe to allow irq's after DR6 has been saved */
if (regs->eflags & X86_EFLAGS_IF)
local_irq_enable();

- /* Mask out spurious debug traps due to lazy DR7 setting */
- if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
- if (!tsk->thread.debugreg[7])
- goto clear_dr7;
+ if (regs->eflags & VM_MASK) {
+ handle_vm86_trap((struct kernel_vm86_regs *) regs,
+ error_code, 1);
+ return;
}

- if (regs->eflags & VM_MASK)
- goto debug_vm86;
-
- /* Save debug status register where ptrace can see it */
- tsk->thread.debugreg[6] = condition;
-
/*
- * Single-stepping through TF: make sure we ignore any events in
- * kernel space (but re-enable TF when returning to user mode).
+ * Single-stepping through system calls: ignore any exceptions in
+ * kernel space, but re-enable TF when returning to user mode.
+ *
+ * We already checked v86 mode above, so we can check for kernel mode
+ * by just checking the CPL of CS.
*/
- if (condition & DR_STEP) {
- /*
- * We already checked v86 mode above, so we can
- * check for kernel mode by just checking the CPL
- * of CS.
- */
- if (!user_mode(regs))
- goto clear_TF_reenable;
+ if ((dr6 & DR_STEP) && !user_mode(regs)) {
+ tsk->thread.vdr6 &= ~DR_STEP;
+ set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
+ regs->eflags &= ~X86_EFLAGS_TF;
}

- /* Ok, finally something we can handle */
- send_sigtrap(tsk, regs, error_code);
-
- /* Disable additional traps. They'll be re-enabled when
- * the signal is delivered.
- */
-clear_dr7:
- set_debugreg(0, 7);
- return;
-
-debug_vm86:
- handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
- return;
-
-clear_TF_reenable:
- set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
- regs->eflags &= ~TF_MASK;
- return;
+ if (tsk->thread.vdr6 & (DR_STEP|DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3))
+ send_sigtrap(tsk, regs, error_code);
}

/*
Index: usb-2.6/include/asm-i386/debugreg.h
===================================================================
--- usb-2.6.orig/include/asm-i386/debugreg.h
+++ usb-2.6/include/asm-i386/debugreg.h
@@ -48,6 +48,8 @@

#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit */
#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit */
+#define DR_LOCAL_ENABLE (0x1) /* Local enable for reg 0 */
+#define DR_GLOBAL_ENABLE (0x2) /* Global enable for reg 0 */
#define DR_ENABLE_SIZE 2 /* 2 enable bits per register */

#define DR_LOCAL_ENABLE_MASK (0x55) /* Set local bits for all 4 regs */
@@ -61,4 +63,32 @@
#define DR_LOCAL_SLOWDOWN (0x100) /* Local slow the pipeline */
#define DR_GLOBAL_SLOWDOWN (0x200) /* Global slow the pipeline */

+
+/*
+ * HW breakpoint additions
+ */
+#ifdef __KERNEL__
+
+#define HB_NUM 4 /* Number of hardware breakpoints */
+
+/* For process management */
+void flush_thread_hw_breakpoint(struct task_struct *tsk);
+int copy_thread_hw_breakpoint(struct task_struct *tsk,
+ struct task_struct *child, unsigned long clone_flags);
+void dump_thread_hw_breakpoint(struct task_struct *tsk, int u_debugreg[8]);
+void switch_to_thread_hw_breakpoint(struct task_struct *tsk);
+
+/* For CPU management */
+void load_debug_registers(void);
+static inline void disable_debug_registers(void)
+{
+ set_debugreg(0, 7);
+}
+
+/* For use by ptrace */
+unsigned long thread_get_debugreg(struct task_struct *tsk, int n);
+int thread_set_debugreg(struct task_struct *tsk, int n, unsigned long val);
+
+#endif /* __KERNEL__ */
+
#endif
Index: usb-2.6/include/asm-i386/processor.h
===================================================================
--- usb-2.6.orig/include/asm-i386/processor.h
+++ usb-2.6/include/asm-i386/processor.h
@@ -354,8 +354,9 @@ struct thread_struct {
unsigned long esp;
unsigned long fs;
unsigned long gs;
-/* Hardware debugging registers */
- unsigned long debugreg[8]; /* %%db0-7 debug registers */
+/* Hardware breakpoint info */
+ unsigned long vdr6;
+ struct thread_hw_breakpoint *hw_breakpoint_info;
/* fault info */
unsigned long cr2, trap_no, error_code;
/* floating point info */
Index: usb-2.6/arch/i386/kernel/hw_breakpoint.c
===================================================================
--- /dev/null
+++ usb-2.6/arch/i386/kernel/hw_breakpoint.c
@@ -0,0 +1,653 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 Alan Stern
+ */
+
+/*
+ * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
+ * using the CPU's debug registers.
+ */
+
+/* QUESTIONS
+
+ How to know whether RF should be cleared when setting a user
+ execution breakpoint?
+
+*/
+
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/kdebug.h>
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/rcupdate.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+
+#include <asm/debugreg.h>
+#include <asm/hw_breakpoint.h>
+#include <asm/percpu.h>
+#include <asm/processor.h>
+
+
+/* Per-thread HW breakpoint and debug register info */
+struct thread_hw_breakpoint {
+
+ /* utrace support */
+ struct list_head node; /* Entry in thread list */
+ struct list_head thread_bps; /* Thread's breakpoints */
+ struct hw_breakpoint *bps[HB_NUM]; /* Highest-priority bps */
+ unsigned long tdr[HB_NUM]; /* and their addresses */
+ int num_installed; /* Number of installed bps */
+ unsigned gennum; /* update-generation number */
+
+ /* Only the portions below are arch-specific */
+
+ /* ptrace support -- Note that vdr6 is stored directly in the
+ * thread_struct so that it is always available.
+ */
+ unsigned long vdr7; /* Virtualized DR7 */
+ struct hw_breakpoint vdr_bps[HB_NUM]; /* Breakpoints
+ representing virtualized debug registers 0 - 3 */
+ unsigned long tdr7; /* Thread's DR7 value */
+ unsigned long tkdr7; /* Thread + kernel DR7 value */
+};
+
+/* Kernel-space breakpoint data */
+struct kernel_bp_data {
+ unsigned gennum; /* Generation number */
+ int num_kbps; /* Number of kernel bps */
+ struct hw_breakpoint *bps[HB_NUM]; /* Loaded breakpoints */
+
+ /* Only the portions below are arch-specific */
+ unsigned long mkdr7; /* Masked kernel DR7 value */
+};
+
+/* Per-CPU debug register info */
+struct cpu_hw_breakpoint {
+ struct kernel_bp_data *cur_kbpdata; /* Current kbpdata[] entry */
+ struct task_struct *bp_task; /* The thread whose bps
+ are currently loaded in the debug registers */
+};
+
+static DEFINE_PER_CPU(struct cpu_hw_breakpoint, cpu_info);
+
+/* Global info */
+static struct kernel_bp_data kbpdata[2]; /* Old and new settings */
+static int cur_kbpindex; /* Alternates 0, 1, ... */
+static struct kernel_bp_data *cur_kbpdata = &kbpdata[0];
+ /* Always equal to &kbpdata[cur_kbpindex] */
+
+static u8 tprio[HB_NUM]; /* Thread bp max priorities */
+static LIST_HEAD(kernel_bps); /* Kernel breakpoint list */
+static LIST_HEAD(thread_list); /* thread_hw_breakpoint list */
+static DEFINE_MUTEX(hw_breakpoint_mutex); /* Protects everything */
+
+/* Only the portions below are arch-specific */
+
+static unsigned long kdr7; /* Unmasked kernel DR7 value */
+
+/* Masks for the bits in DR7 related to kernel breakpoints, for various
+ * values of num_kbps. Entry n is the mask for when there are n kernel
+ * breakpoints, in debug registers 0 - (n-1). The DR_GLOBAL_SLOWDOWN bit
+ * (GE) is handled specially.
+ */
+static const unsigned long kdr7_masks[HB_NUM + 1] = {
+ 0x00000000,
+ 0x000f0003, /* LEN0, R/W0, G0, L0 */
+ 0x00ff000f, /* Same for 0,1 */
+ 0x0fff003f, /* Same for 0,1,2 */
+ 0xffff00ff /* Same for 0,1,2,3 */
+};
+
+
+/* Arch-specific hook routines */
+
+
+/*
+ * Install the kernel breakpoints in their debug registers.
+ */
+static void arch_install_chbi(struct cpu_hw_breakpoint *chbi)
+{
+ struct hw_breakpoint **bps;
+
+ /* Don't allow debug exceptions while we update the registers */
+ set_debugreg(0, 7);
+ chbi->cur_kbpdata = rcu_dereference(cur_kbpdata);
+
+ /* Kernel breakpoints are stored starting in DR0 and going up */
+ bps = chbi->cur_kbpdata->bps;
+ switch (chbi->cur_kbpdata->num_kbps) {
+ case 4:
+ set_debugreg(bps[3]->info.address, 3);
+ case 3:
+ set_debugreg(bps[2]->info.address, 2);
+ case 2:
+ set_debugreg(bps[1]->info.address, 1);
+ case 1:
+ set_debugreg(bps[0]->info.address, 0);
+ }
+ /* No need to set DR6 */
+ set_debugreg(chbi->cur_kbpdata->mkdr7, 7);
+}
+
+/*
+ * Update an out-of-date thread hw_breakpoint info structure.
+ */
+static void arch_update_thbi(struct thread_hw_breakpoint *thbi,
+ struct kernel_bp_data *thr_kbpdata)
+{
+ int num = thr_kbpdata->num_kbps;
+
+ thbi->tkdr7 = thr_kbpdata->mkdr7 | (thbi->tdr7 & ~kdr7_masks[num]);
+}
+
+/*
+ * Install the thread breakpoints in their debug registers.
+ */
+static void arch_install_thbi(struct thread_hw_breakpoint *thbi)
+{
+ /* Install the user breakpoints. Kernel breakpoints are stored
+ * starting in DR0 and going up; there are num_kbps of them.
+ * User breakpoints are stored starting in DR3 and going down,
+ * as many as we have room for.
+ */
+ switch (thbi->num_installed) {
+ case 4:
+ set_debugreg(thbi->tdr[0], 0);
+ case 3:
+ set_debugreg(thbi->tdr[1], 1);
+ case 2:
+ set_debugreg(thbi->tdr[2], 2);
+ case 1:
+ set_debugreg(thbi->tdr[3], 3);
+ }
+ /* No need to set DR6 */
+ set_debugreg(thbi->tkdr7, 7);
+}
+
+/*
+ * Install the debug register values for just the kernel, no thread.
+ */
+static void arch_install_none(struct cpu_hw_breakpoint *chbi)
+{
+ set_debugreg(chbi->cur_kbpdata->mkdr7, 7);
+}
+
+/*
+ * Create a new kbpdata entry.
+ */
+static void arch_new_kbpdata(struct kernel_bp_data *new_kbpdata)
+{
+ int num = new_kbpdata->num_kbps;
+
+ new_kbpdata->mkdr7 = kdr7 & (kdr7_masks[num] | DR_GLOBAL_SLOWDOWN);
+}
+
+/*
+ * Store a thread breakpoint array entry's address
+ */
+static void arch_store_thread_bp_array(struct thread_hw_breakpoint *thbi,
+ struct hw_breakpoint *bp, int i)
+{
+ thbi->tdr[i] = bp->info.address;
+}
+
+/*
+ * Check for virtual address in user space.
+ */
+static int arch_check_va_in_userspace(unsigned long va,
+ struct task_struct *tsk)
+{
+#ifndef CONFIG_X86_64
+#define TASK_SIZE_OF(t) TASK_SIZE
+#endif
+ return (va < TASK_SIZE_OF(tsk));
+}
+
+/*
+ * Check for virtual address in kernel space.
+ */
+static int arch_check_va_in_kernelspace(unsigned long va)
+{
+#ifndef CONFIG_X86_64
+#define TASK_SIZE64 TASK_SIZE
+#endif
+ return (va >= TASK_SIZE64);
+}
+
+/*
+ * Store a breakpoint's encoded address, length, and type.
+ */
+static void arch_store_info(struct hw_breakpoint *bp,
+ unsigned long address, unsigned len, unsigned type)
+{
+ bp->info.address = address;
+ bp->info.len = len;
+ bp->info.type = type;
+}
+
+/*
+ * Encode the length, type, Exact, and Enable bits for a particular breakpoint
+ * as stored in debug register 7.
+ */
+static unsigned long encode_dr7(int drnum, unsigned len, unsigned type)
+{
+ unsigned long temp;
+
+ temp = (len | type) & 0xf;
+ temp <<= (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE);
+ temp |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE)) |
+ DR_GLOBAL_SLOWDOWN;
+ return temp;
+}
+
+/*
+ * Calculate the DR7 value for a list of kernel or user breakpoints.
+ */
+static unsigned long calculate_dr7(struct thread_hw_breakpoint *thbi)
+{
+ int is_user;
+ struct list_head *bp_list;
+ struct hw_breakpoint *bp;
+ int i;
+ int drnum;
+ unsigned long dr7;
+
+ if (thbi) {
+ is_user = 1;
+ bp_list = &thbi->thread_bps;
+ drnum = HB_NUM - 1;
+ } else {
+ is_user = 0;
+ bp_list = &kernel_bps;
+ drnum = 0;
+ }
+
+ /* Kernel bps are assigned from DR0 on up, and user bps are assigned
+ * from DR3 on down. Accumulate all 4 bps; the kernel DR7 mask will
+ * select the appropriate bits later.
+ */
+ dr7 = 0;
+ i = 0;
+ list_for_each_entry(bp, bp_list, node) {
+
+ /* Get the debug register number and accumulate the bits */
+ dr7 |= encode_dr7(drnum, bp->info.len, bp->info.type);
+ if (++i >= HB_NUM)
+ break;
+ if (is_user)
+ --drnum;
+ else
+ ++drnum;
+ }
+ return dr7;
+}
+
+/*
+ * Register a new user breakpoint structure.
+ */
+static void arch_register_user_hw_breakpoint(struct hw_breakpoint *bp,
+ struct thread_hw_breakpoint *thbi)
+{
+ thbi->tdr7 = calculate_dr7(thbi);
+
+ /* If this is an execution breakpoint for the current PC address,
+ * we should clear the task's RF so that the bp will be certain
+ * to trigger.
+ *
+ * FIXME: It's not so easy to get hold of the task's PC as a linear
+ * address! ptrace.c does this already...
+ */
+}
+
+/*
+ * Unregister a user breakpoint structure.
+ */
+static void arch_unregister_user_hw_breakpoint(struct hw_breakpoint *bp,
+ struct thread_hw_breakpoint *thbi)
+{
+ thbi->tdr7 = calculate_dr7(thbi);
+}
+
+/*
+ * Register a kernel breakpoint structure.
+ */
+static void arch_register_kernel_hw_breakpoint(
+ struct hw_breakpoint *bp)
+{
+ kdr7 = calculate_dr7(NULL);
+}
+
+/*
+ * Unregister a kernel breakpoint structure.
+ */
+static void arch_unregister_kernel_hw_breakpoint(
+ struct hw_breakpoint *bp)
+{
+ kdr7 = calculate_dr7(NULL);
+}
+
+
+/* End of arch-specific hook routines */
+
+
+/*
+ * Copy out the debug register information for a core dump.
+ *
+ * tsk must be equal to current.
+ */
+void dump_thread_hw_breakpoint(struct task_struct *tsk, int u_debugreg[8])
+{
+ struct thread_hw_breakpoint *thbi = tsk->thread.hw_breakpoint_info;
+ int i;
+
+ memset(u_debugreg, 0, sizeof u_debugreg);
+ if (thbi) {
+ for (i = 0; i < HB_NUM; ++i)
+ u_debugreg[i] = thbi->vdr_bps[i].info.address;
+ u_debugreg[7] = thbi->vdr7;
+ }
+ u_debugreg[6] = tsk->thread.vdr6;
+}
+
+/*
+ * Ptrace support: breakpoint trigger routine.
+ */
+
+static struct thread_hw_breakpoint *alloc_thread_hw_breakpoint(
+ struct task_struct *tsk);
+static int __register_user_hw_breakpoint(struct task_struct *tsk,
+ struct hw_breakpoint *bp,
+ unsigned long address, unsigned len, unsigned type);
+static void __unregister_user_hw_breakpoint(struct task_struct *tsk,
+ struct hw_breakpoint *bp);
+
+static void ptrace_triggered(struct hw_breakpoint *bp, struct pt_regs *regs)
+{
+ struct task_struct *tsk = current;
+ struct thread_hw_breakpoint *thbi = tsk->thread.hw_breakpoint_info;
+ int i;
+
+ /* Store in the virtual DR6 register the fact that the breakpoint
+ * was hit so the thread's debugger will see it.
+ */
+ if (thbi) {
+ i = bp - thbi->vdr_bps;
+ tsk->thread.vdr6 |= (DR_TRAP0 << i);
+ send_sigtrap(tsk, regs, 0);
+ }
+}
+
+/*
+ * Handle PTRACE_PEEKUSR calls for the debug register area.
+ */
+unsigned long thread_get_debugreg(struct task_struct *tsk, int n)
+{
+ struct thread_hw_breakpoint *thbi;
+ unsigned long val = 0;
+
+ mutex_lock(&hw_breakpoint_mutex);
+ thbi = tsk->thread.hw_breakpoint_info;
+ if (n < HB_NUM) {
+ if (thbi)
+ val = thbi->vdr_bps[n].info.address;
+ } else if (n == 6) {
+ val = tsk->thread.vdr6;
+ } else if (n == 7) {
+ if (thbi)
+ val = thbi->vdr7;
+ }
+ mutex_unlock(&hw_breakpoint_mutex);
+ return val;
+}
+
+/*
+ * Decode the length and type bits for a particular breakpoint as
+ * stored in debug register 7. Return the "enabled" status.
+ */
+static int decode_dr7(unsigned long dr7, int bpnum, unsigned *len,
+ unsigned *type)
+{
+ int temp = dr7 >> (DR_CONTROL_SHIFT + bpnum * DR_CONTROL_SIZE);
+
+ *len = (temp & 0xc) | 0x40;
+ *type = (temp & 0x3) | 0x80;
+ return (dr7 >> (bpnum * DR_ENABLE_SIZE)) & 0x3;
+}
+
+/*
+ * Handle ptrace writes to debug register 7.
+ */
+static int ptrace_write_dr7(struct task_struct *tsk,
+ struct thread_hw_breakpoint *thbi, unsigned long data)
+{
+ struct hw_breakpoint *bp;
+ int i;
+ int rc = 0;
+ unsigned long old_dr7 = thbi->vdr7;
+
+ data &= ~DR_CONTROL_RESERVED;
+
+ /* Loop through all the hardware breakpoints, making the
+ * appropriate changes to each.
+ */
+ restore_settings:
+ thbi->vdr7 = data;
+ bp = &thbi->vdr_bps[0];
+ for (i = 0; i < HB_NUM; (++i, ++bp)) {
+ int enabled;
+ unsigned len, type;
+
+ enabled = decode_dr7(data, i, &len, &type);
+
+ /* Unregister the breakpoint before trying to change it */
+ if (bp->status)
+ __unregister_user_hw_breakpoint(tsk, bp);
+
+ /* Now register the breakpoint if it should be enabled.
+ * New invalid entries will raise an error here.
+ */
+ if (enabled) {
+ bp->triggered = ptrace_triggered;
+ bp->priority = HW_BREAKPOINT_PRIO_PTRACE;
+ if (rc == 0 && __register_user_hw_breakpoint(tsk, bp,
+ bp->info.address, len, type) < 0)
+ break;
+ }
+ }
+
+ /* If anything above failed, restore the original settings */
+ if (i < HB_NUM) {
+ rc = -EIO;
+ data = old_dr7;
+ goto restore_settings;
+ }
+ return rc;
+}
+
+/*
+ * Handle PTRACE_POKEUSR calls for the debug register area.
+ */
+int thread_set_debugreg(struct task_struct *tsk, int n, unsigned long val)
+{
+ struct thread_hw_breakpoint *thbi;
+ int rc = -EIO;
+
+ /* We have to hold this lock the entire time, to prevent thbi
+ * from being deallocated out from under us.
+ */
+ mutex_lock(&hw_breakpoint_mutex);
+
+ /* There are no DR4 or DR5 registers */
+ if (n == 4 || n == 5)
+ ;
+
+ /* Writes to DR6 modify the virtualized value */
+ else if (n == 6) {
+ tsk->thread.vdr6 = val;
+ rc = 0;
+ }
+
+ else if (!tsk->thread.hw_breakpoint_info && val == 0)
+ rc = 0; /* Minor optimization */
+
+ else if ((thbi = alloc_thread_hw_breakpoint(tsk)) == NULL)
+ rc = -ENOMEM;
+
+ /* Writes to DR0 - DR3 change a breakpoint address */
+ else if (n < HB_NUM) {
+ struct hw_breakpoint *bp = &thbi->vdr_bps[n];
+
+ /* If the breakpoint is registered then unregister it,
+ * change it, and re-register it. Revert to the original
+ * address if an error occurs.
+ */
+ if (bp->status) {
+ unsigned long old_addr = bp->info.address;
+
+ __unregister_user_hw_breakpoint(tsk, bp);
+ rc = __register_user_hw_breakpoint(tsk, bp,
+ val, bp->info.len, bp->info.type);
+ if (rc < 0) {
+ __register_user_hw_breakpoint(tsk, bp,
+ old_addr,
+ bp->info.len, bp->info.type);
+ }
+ } else {
+ bp->info.address = val;
+ rc = 0;
+ }
+ }
+
+ /* All that's left is DR7 */
+ else
+ rc = ptrace_write_dr7(tsk, thbi, val);
+
+ mutex_unlock(&hw_breakpoint_mutex);
+ return rc;
+}
+
+
+/*
+ * Handle debug exception notifications.
+ */
+
+static void switch_to_none_hw_breakpoint(void);
+
+static int __kprobes hw_breakpoint_handler(struct die_args *args)
+{
+ struct cpu_hw_breakpoint *chbi;
+ int i;
+ struct hw_breakpoint *bp;
+ struct thread_hw_breakpoint *thbi = NULL;
+
+ /* The DR6 value is stored in args->err */
+#define DR6 (args->err)
+
+ if (!(DR6 & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)))
+ return NOTIFY_DONE;
+
+ /* Assert that local interrupts are disabled */
+
+ /* Reset the DRn bits in the virtualized register value.
+ * The ptrace trigger routine will add in whatever is needed.
+ */
+ current->thread.vdr6 &= ~(DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3);
+
+ /* Are we a victim of lazy debug-register switching? */
+ chbi = &per_cpu(cpu_info, get_cpu());
+ if (!chbi->bp_task)
+ ;
+ else if (chbi->bp_task != current) {
+
+ /* No user breakpoints are valid. Perform the belated
+ * debug-register switch.
+ */
+ switch_to_none_hw_breakpoint();
+ } else {
+ thbi = chbi->bp_task->thread.hw_breakpoint_info;
+ }
+
+ /* Disable all breakpoints so that the callbacks can run without
+ * triggering recursive debug exceptions.
+ */
+ set_debugreg(0, 7);
+
+ /* Handle all the breakpoints that were triggered */
+ for (i = 0; i < HB_NUM; ++i) {
+ if (likely(!(DR6 & (DR_TRAP0 << i))))
+ continue;
+
+ /* Find the corresponding hw_breakpoint structure and
+ * invoke its triggered callback.
+ */
+ if (i < chbi->cur_kbpdata->num_kbps)
+ bp = chbi->cur_kbpdata->bps[i];
+ else if (thbi)
+ bp = thbi->bps[i];
+ else /* False alarm due to lazy DR switching */
+ continue;
+ if (bp) { /* Should always be non-NULL */
+
+ /* Set RF at execution breakpoints */
+ if (bp->info.type == HW_BREAKPOINT_EXECUTE)
+ args->regs->eflags |= X86_EFLAGS_RF;
+ (bp->triggered)(bp, args->regs);
+ }
+ }
+
+ /* Re-enable the breakpoints */
+ set_debugreg(thbi ? thbi->tkdr7 : chbi->cur_kbpdata->mkdr7, 7);
+ put_cpu_no_resched();
+
+ if (!(DR6 & ~(DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)))
+ return NOTIFY_STOP;
+
+ return NOTIFY_DONE;
+#undef DR6
+}
+
+/*
+ * Handle debug exception notifications.
+ */
+static int __kprobes hw_breakpoint_exceptions_notify(
+ struct notifier_block *unused, unsigned long val, void *data)
+{
+ if (val != DIE_DEBUG)
+ return NOTIFY_DONE;
+ return hw_breakpoint_handler(data);
+}
+
+static struct notifier_block hw_breakpoint_exceptions_nb = {
+ .notifier_call = hw_breakpoint_exceptions_notify
+};
+
+static int __init init_hw_breakpoint(void)
+{
+ load_debug_registers();
+ return register_die_notifier(&hw_breakpoint_exceptions_nb);
+}
+
+core_initcall(init_hw_breakpoint);
+
+
+/* Grab the arch-independent code */
+
+#include "../../../kernel/hw_breakpoint.c"
Index: usb-2.6/arch/i386/kernel/ptrace.c
===================================================================
--- usb-2.6.orig/arch/i386/kernel/ptrace.c
+++ usb-2.6/arch/i386/kernel/ptrace.c
@@ -382,11 +382,11 @@ long arch_ptrace(struct task_struct *chi
tmp = 0; /* Default return condition */
if(addr < FRAME_SIZE*sizeof(long))
tmp = getreg(child, addr);
- if(addr >= (long) &dummy->u_debugreg[0] &&
- addr <= (long) &dummy->u_debugreg[7]){
+ else if (addr >= (long) &dummy->u_debugreg[0] &&
+ addr <= (long) &dummy->u_debugreg[7]) {
addr -= (long) &dummy->u_debugreg[0];
addr = addr >> 2;
- tmp = child->thread.debugreg[addr];
+ tmp = thread_get_debugreg(child, addr);
}
ret = put_user(tmp, datap);
break;
@@ -416,59 +416,11 @@ long arch_ptrace(struct task_struct *chi
have to be selective about what portions we allow someone
to modify. */

- ret = -EIO;
- if(addr >= (long) &dummy->u_debugreg[0] &&
- addr <= (long) &dummy->u_debugreg[7]){
-
- if(addr == (long) &dummy->u_debugreg[4]) break;
- if(addr == (long) &dummy->u_debugreg[5]) break;
- if(addr < (long) &dummy->u_debugreg[4] &&
- ((unsigned long) data) >= TASK_SIZE-3) break;
-
- /* Sanity-check data. Take one half-byte at once with
- * check = (val >> (16 + 4*i)) & 0xf. It contains the
- * R/Wi and LENi bits; bits 0 and 1 are R/Wi, and bits
- * 2 and 3 are LENi. Given a list of invalid values,
- * we do mask |= 1 << invalid_value, so that
- * (mask >> check) & 1 is a correct test for invalid
- * values.
- *
- * R/Wi contains the type of the breakpoint /
- * watchpoint, LENi contains the length of the watched
- * data in the watchpoint case.
- *
- * The invalid values are:
- * - LENi == 0x10 (undefined), so mask |= 0x0f00.
- * - R/Wi == 0x10 (break on I/O reads or writes), so
- * mask |= 0x4444.
- * - R/Wi == 0x00 && LENi != 0x00, so we have mask |=
- * 0x1110.
- *
- * Finally, mask = 0x0f00 | 0x4444 | 0x1110 == 0x5f54.
- *
- * See the Intel Manual "System Programming Guide",
- * 15.2.4
- *
- * Note that LENi == 0x10 is defined on x86_64 in long
- * mode (i.e. even for 32-bit userspace software, but
- * 64-bit kernel), so the x86_64 mask value is 0x5454.
- * See the AMD manual no. 24593 (AMD64 System
- * Programming)*/
-
- if(addr == (long) &dummy->u_debugreg[7]) {
- data &= ~DR_CONTROL_RESERVED;
- for(i=0; i<4; i++)
- if ((0x5f54 >> ((data >> (16 + 4*i)) & 0xf)) & 1)
- goto out_tsk;
- if (data)
- set_tsk_thread_flag(child, TIF_DEBUG);
- else
- clear_tsk_thread_flag(child, TIF_DEBUG);
- }
- addr -= (long) &dummy->u_debugreg;
- addr = addr >> 2;
- child->thread.debugreg[addr] = data;
- ret = 0;
+ if (addr >= (long) &dummy->u_debugreg[0] &&
+ addr <= (long) &dummy->u_debugreg[7]) {
+ addr -= (long) &dummy->u_debugreg;
+ addr = addr >> 2;
+ ret = thread_set_debugreg(child, addr, data);
}
break;

@@ -624,7 +576,6 @@ long arch_ptrace(struct task_struct *chi
ret = ptrace_request(child, request, addr, data);
break;
}
- out_tsk:
return ret;
}

Index: usb-2.6/arch/i386/kernel/Makefile
===================================================================
--- usb-2.6.orig/arch/i386/kernel/Makefile
+++ usb-2.6/arch/i386/kernel/Makefile
@@ -7,7 +7,8 @@ extra-y := head.o init_task.o vmlinux.ld
obj-y := process.o signal.o entry.o traps.o irq.o \
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
pci-dma.o i386_ksyms.o i387.o bootflag.o e820.o\
- quirks.o i8237.o topology.o alternative.o i8253.o tsc.o
+ quirks.o i8237.o topology.o alternative.o i8253.o tsc.o \
+ hw_breakpoint.o

obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-y += cpu/
Index: usb-2.6/arch/i386/power/cpu.c
===================================================================
--- usb-2.6.orig/arch/i386/power/cpu.c
+++ usb-2.6/arch/i386/power/cpu.c
@@ -11,6 +11,7 @@
#include <linux/suspend.h>
#include <asm/mtrr.h>
#include <asm/mce.h>
+#include <asm/debugreg.h>

static struct saved_context saved_context;

@@ -46,6 +47,8 @@ void __save_processor_state(struct saved
ctxt->cr2 = read_cr2();
ctxt->cr3 = read_cr3();
ctxt->cr4 = read_cr4();
+
+ disable_debug_registers();
}

void save_processor_state(void)
@@ -70,20 +73,7 @@ static void fix_processor_context(void)

load_TR_desc(); /* This does ltr */
load_LDT(&current->active_mm->context); /* This does lldt */
-
- /*
- * Now maybe reload the debug registers
- */
- if (current->thread.debugreg[7]){
- set_debugreg(current->thread.debugreg[0], 0);
- set_debugreg(current->thread.debugreg[1], 1);
- set_debugreg(current->thread.debugreg[2], 2);
- set_debugreg(current->thread.debugreg[3], 3);
- /* no 4 and 5 */
- set_debugreg(current->thread.debugreg[6], 6);
- set_debugreg(current->thread.debugreg[7], 7);
- }
-
+ load_debug_registers();
}

void __restore_processor_state(struct saved_context *ctxt)
Index: usb-2.6/arch/i386/kernel/kprobes.c
===================================================================
--- usb-2.6.orig/arch/i386/kernel/kprobes.c
+++ usb-2.6/arch/i386/kernel/kprobes.c
@@ -35,6 +35,7 @@
#include <asm/cacheflush.h>
#include <asm/desc.h>
#include <asm/uaccess.h>
+#include <asm/debugreg.h>

void jprobe_return_end(void);

@@ -660,9 +661,19 @@ int __kprobes kprobe_exceptions_notify(s
ret = NOTIFY_STOP;
break;
case DIE_DEBUG:
- if (post_kprobe_handler(args->regs))
- ret = NOTIFY_STOP;
+ /*
+ * The DR6 value is stored in args->err.
+ * If DR_STEP is set and it's ours, we should clear DR_STEP
+ * from the user's virtualized DR6 register.
+ * Then if no more bits are set we should eat this exception.
+ */
+ if ((args->err & DR_STEP) && post_kprobe_handler(args->regs)) {
+ current->thread.vdr6 &= ~DR_STEP;
+ if ((args->err & ~DR_STEP) == 0)
+ ret = NOTIFY_STOP;
+ }
break;
+
case DIE_GPF:
case DIE_PAGE_FAULT:
/* kprobe_running() needs smp_processor_id() */
Index: usb-2.6/include/asm-generic/hw_breakpoint.h
===================================================================
--- /dev/null
+++ usb-2.6/include/asm-generic/hw_breakpoint.h
@@ -0,0 +1,225 @@
+#ifndef _ASM_GENERIC_HW_BREAKPOINT_H
+#define _ASM_GENERIC_HW_BREAKPOINT_H
+
+#ifndef __ARCH_HW_BREAKPOINT_H
+#error "Please don't include this file directly"
+#endif
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/types.h>
+
+/**
+ * struct hw_breakpoint - unified kernel/user-space hardware breakpoint
+ * @node: internal linked-list management
+ * @triggered: callback invoked when the breakpoint is hit
+ * @installed: callback invoked when the breakpoint is installed
+ * @uninstalled: callback invoked when the breakpoint is uninstalled
+ * @info: arch-specific breakpoint info (address, length, and type)
+ * @priority: requested priority level
+ * @status: current registration/installation status
+ *
+ * %hw_breakpoint structures are the kernel's way of representing
+ * hardware breakpoints. These can be either execute breakpoints
+ * (triggered on instruction execution) or data breakpoints (also known
+ * as "watchpoints", triggered on data access), and the breakpoint's
+ * target address can be located in either kernel space or user space.
+ *
+ * The breakpoint's address, length, and type are highly
+ * architecture-specific. The values are encoded in the @info field; you
+ * specify them when registering the breakpoint. To examine the encoded
+ * values use hw_breakpoint_get_{kaddress,uaddress,len,type}(), declared
+ * below.
+ *
+ * The address is specified as a regular kernel pointer (for kernel-space
+ * breakponts) or as an %__user pointer (for user-space breakpoints).
+ * With register_user_hw_breakpoint(), the address must refer to a
+ * location in user space. The breakpoint will be active only while the
+ * requested task is running. Conversely with
+ * register_kernel_hw_breakpoint(), the address must refer to a location
+ * in kernel space, and the breakpoint will be active on all CPUs
+ * regardless of the current task.
+ *
+ * The length is the breakpoint's extent in bytes, which is subject to
+ * certain limitations. include/asm/hw_breakpoint.h contains macros
+ * defining the available lengths for a specific architecture. Note that
+ * the address's alignment must match the length. The breakpoint will
+ * catch accesses to any byte in the range from address to address +
+ * (length - 1).
+ *
+ * The breakpoint's type indicates the sort of access that will cause it
+ * to trigger. Possible values may include:
+ *
+ * %HW_BREAKPOINT_EXECUTE (triggered on instruction execution),
+ * %HW_BREAKPOINT_RW (triggered on read or write access),
+ * %HW_BREAKPOINT_WRITE (triggered on write access), and
+ * %HW_BREAKPOINT_READ (triggered on read access).
+ *
+ * Appropriate macros are defined in include/asm/hw_breakpoint.h; not all
+ * possibilities are available on all architectures. Execute breakpoints
+ * must have length equal to the special value %HW_BREAKPOINT_LEN_EXECUTE.
+ *
+ * When a breakpoint gets hit, the @triggered callback is invoked
+ * in_interrupt with a pointer to the %hw_breakpoint structure and the
+ * processor registers. Execute-breakpoint traps occur before the
+ * breakpointed instruction runs; when the callback returns the
+ * instruction is restarted (this time without a debug exception). All
+ * other types of trap occur after the memory access has taken place.
+ * Breakpoints are disabled while @triggered runs, to avoid recursive
+ * traps and allow unhindered access to breakpointed memory.
+ *
+ * Hardware breakpoints are implemented using the CPU's debug registers,
+ * which are a limited hardware resource. Requests to register a
+ * breakpoint will always succeed provided the parameters are valid,
+ * but the breakpoint may not be installed in a debug register right
+ * away. Physical debug registers are allocated based on the priority
+ * level stored in @priority (higher values indicate higher priority).
+ * User-space breakpoints within a single thread compete with one
+ * another, and all user-space breakpoints compete with all kernel-space
+ * breakpoints; however user-space breakpoints in different threads do
+ * not compete. %HW_BREAKPOINT_PRIO_PTRACE is the level used for ptrace
+ * requests; an unobtrusive kernel-space breakpoint will use
+ * %HW_BREAKPOINT_PRIO_NORMAL to avoid disturbing user programs. A
+ * kernel-space breakpoint that always wants to be installed and doesn't
+ * care about disrupting user debugging sessions can specify
+ * %HW_BREAKPOINT_PRIO_HIGH.
+ *
+ * A particular breakpoint may be allocated (installed in) a debug
+ * register or deallocated (uninstalled) from its debug register at any
+ * time, as other breakpoints are registered and unregistered. The
+ * @installed and @uninstalled callbacks are invoked in_atomic when these
+ * events occur. It is legal for @installed or @uninstalled to be %NULL,
+ * however @triggered must not be. Note that it is not possible to
+ * register or unregister a breakpoint from within a callback routine,
+ * since doing so requires a process context. Note also that for user
+ * breakpoints, @installed and @uninstalled may be called during the
+ * middle of a context switch, at a time when it is not safe to call
+ * printk().
+ *
+ * For kernel-space breakpoints, @installed is invoked after the
+ * breakpoint is actually installed and @uninstalled is invoked before
+ * the breakpoint is actually uninstalled. As a result @triggered can
+ * be called when you may not expect it, but this way you will know that
+ * during the time interval from @installed to @uninstalled, all events
+ * are faithfully reported. (It is not possible to do any better than
+ * this in general, because on SMP systems there is no way to set a debug
+ * register simultaneously on all CPUs.) The same isn't always true with
+ * user-space breakpoints, but the differences should not be visible to a
+ * user process.
+ *
+ * If you need to know whether your kernel-space breakpoint was installed
+ * immediately upon registration, you can check the return value from
+ * register_kernel_hw_breakpoint(). If the value is not > 0, you can
+ * give up and unregister the breakpoint right away.
+ *
+ * @node and @status are intended for internal use. However @status
+ * may be read to determine whether or not the breakpoint is currently
+ * installed. (The value is not reliable unless local interrupts are
+ * disabled.)
+ *
+ * This sample code sets a breakpoint on pid_max and registers a callback
+ * function for writes to that variable. Note that it is not portable
+ * as written, because not all architectures support HW_BREAKPOINT_LEN_4.
+ *
+ * ----------------------------------------------------------------------
+ *
+ * #include <asm/hw_breakpoint.h>
+ *
+ * static void triggered(struct hw_breakpoint *bp, struct pt_regs *regs)
+ * {
+ * printk(KERN_DEBUG "Breakpoint triggered\n");
+ * dump_stack();
+ * .......<more debugging output>........
+ * }
+ *
+ * static struct hw_breakpoint my_bp;
+ *
+ * static int init_module(void)
+ * {
+ * ..........<do anything>............
+ * my_bp.triggered = triggered;
+ * my_bp.priority = HW_BREAKPOINT_PRIO_NORMAL;
+ * rc = register_kernel_hw_breakpoint(&my_bp, &pid_max,
+ * HW_BREAKPOINT_LEN_4, HW_BREAKPOINT_WRITE);
+ * ..........<do anything>............
+ * }
+ *
+ * static void cleanup_module(void)
+ * {
+ * ..........<do anything>............
+ * unregister_kernel_hw_breakpoint(&my_bp);
+ * ..........<do anything>............
+ * }
+ *
+ * ----------------------------------------------------------------------
+ *
+ */
+struct hw_breakpoint {
+ struct list_head node;
+ void (*triggered)(struct hw_breakpoint *, struct pt_regs *);
+ void (*installed)(struct hw_breakpoint *);
+ void (*uninstalled)(struct hw_breakpoint *);
+ struct arch_hw_breakpoint info;
+ u8 priority;
+ u8 status;
+};
+
+/*
+ * Inline accessor routines to retrieve the arch-specific parts of
+ * a breakpoint structure:
+ */
+static const void *hw_breakpoint_get_kaddress(struct hw_breakpoint *bp);
+static const void __user *hw_breakpoint_get_uaddress(struct hw_breakpoint *bp);
+static unsigned hw_breakpoint_get_len(struct hw_breakpoint *bp);
+static unsigned hw_breakpoint_get_type(struct hw_breakpoint *bp);
+
+/*
+ * len and type values are defined in include/asm/hw_breakpoint.h.
+ * Available values vary according to the architecture. On i386 the
+ * possibilities are:
+ *
+ * HW_BREAKPOINT_LEN_1
+ * HW_BREAKPOINT_LEN_2
+ * HW_BREAKPOINT_LEN_4
+ * HW_BREAKPOINT_LEN_EXECUTE
+ * HW_BREAKPOINT_RW
+ * HW_BREAKPOINT_READ
+ * HW_BREAKPOINT_EXECUTE
+ *
+ * On other architectures HW_BREAKPOINT_LEN_8 may be available, and the
+ * 1-, 2-, and 4-byte lengths may be unavailable. There also may be
+ * HW_BREAKPOINT_WRITE. You can use #ifdef to check at compile time.
+ */
+
+/* Standard HW breakpoint priority levels (higher value = higher priority) */
+#define HW_BREAKPOINT_PRIO_NORMAL 25
+#define HW_BREAKPOINT_PRIO_PTRACE 50
+#define HW_BREAKPOINT_PRIO_HIGH 75
+
+/* HW breakpoint status values (0 = not registered) */
+#define HW_BREAKPOINT_REGISTERED 1
+#define HW_BREAKPOINT_INSTALLED 2
+
+/*
+ * The following two routines are meant to be called only from within
+ * the ptrace or utrace subsystems. The tsk argument will usually be a
+ * process being debugged by the current task, although it is also legal
+ * for tsk to be the current task. In any case it must be guaranteed
+ * that tsk will not start running in user mode while its breakpoints are
+ * being modified.
+ */
+int register_user_hw_breakpoint(struct task_struct *tsk,
+ struct hw_breakpoint *bp,
+ const void __user *address, unsigned len, unsigned type);
+void unregister_user_hw_breakpoint(struct task_struct *tsk,
+ struct hw_breakpoint *bp);
+
+/*
+ * Kernel breakpoints are not associated with any particular thread.
+ */
+int register_kernel_hw_breakpoint(struct hw_breakpoint *bp,
+ const void *address, unsigned len, unsigned type);
+void unregister_kernel_hw_breakpoint(struct hw_breakpoint *bp);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_GENERIC_HW_BREAKPOINT_H */
Index: usb-2.6/arch/i386/kernel/machine_kexec.c
===================================================================
--- usb-2.6.orig/arch/i386/kernel/machine_kexec.c
+++ usb-2.6/arch/i386/kernel/machine_kexec.c
@@ -19,6 +19,7 @@
#include <asm/cpufeature.h>
#include <asm/desc.h>
#include <asm/system.h>
+#include <asm/debugreg.h>

#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
static u32 kexec_pgd[1024] PAGE_ALIGNED;
@@ -108,6 +109,7 @@ NORET_TYPE void machine_kexec(struct kim

/* Interrupts aren't acceptable while we reboot */
local_irq_disable();
+ disable_debug_registers();

control_page = page_address(image->control_code_page);
memcpy(control_page, relocate_kernel, PAGE_SIZE);
Index: usb-2.6/arch/i386/kernel/smpboot.c
===================================================================
--- usb-2.6.orig/arch/i386/kernel/smpboot.c
+++ usb-2.6/arch/i386/kernel/smpboot.c
@@ -58,6 +58,7 @@
#include <smpboot_hooks.h>
#include <asm/vmi.h>
#include <asm/mtrr.h>
+#include <asm/debugreg.h>

/* Set if we find a B stepping CPU */
static int __devinitdata smp_b_stepping;
@@ -427,6 +428,7 @@ static void __cpuinit start_secondary(vo
local_irq_enable();

wmb();
+ load_debug_registers();
cpu_idle();
}

@@ -1209,6 +1211,7 @@ int __cpu_disable(void)
fixup_irqs(map);
/* It's now safe to remove this processor from the online map */
cpu_clear(cpu, cpu_online_map);
+ disable_debug_registers();
return 0;
}

Index: usb-2.6/kernel/hw_breakpoint.c
===================================================================
--- /dev/null
+++ usb-2.6/kernel/hw_breakpoint.c
@@ -0,0 +1,777 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 Alan Stern
+ */
+
+/*
+ * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
+ * using the CPU's debug registers.
+ *
+ * This file contains the arch-independent routines. It is not meant
+ * to be compiled as a standalone source file; rather it should be
+ * #include'd by the arch-specific implementation.
+ */
+
+
+/*
+ * Install the debug register values for a new thread.
+ */
+void switch_to_thread_hw_breakpoint(struct task_struct *tsk)
+{
+ struct thread_hw_breakpoint *thbi = tsk->thread.hw_breakpoint_info;
+ struct cpu_hw_breakpoint *chbi;
+ struct kernel_bp_data *thr_kbpdata;
+
+ /* This routine is on the hot path; it gets called for every
+ * context switch into a task with active breakpoints. We
+ * must make sure that the common case executes as quickly as
+ * possible.
+ */
+ chbi = &per_cpu(cpu_info, get_cpu());
+ chbi->bp_task = tsk;
+
+ /* Use RCU to synchronize with external updates */
+ rcu_read_lock();
+
+ /* Other CPUs might be making updates to the list of kernel
+ * breakpoints at this time. If they are, they will modify
+ * the other entry in kbpdata[] -- the one not pointed to
+ * by chbi->cur_kbpdata. So the update itself won't affect
+ * us directly.
+ *
+ * However when the update is finished, an IPI will arrive
+ * telling this CPU to change chbi->cur_kbpdata. We need
+ * to use a single consistent kbpdata[] entry, the present one.
+ * So we'll copy the pointer to a local variable, thr_kbpdata,
+ * and we must prevent the compiler from aliasing the two
+ * pointers. Only a compiler barrier is required, not a full
+ * memory barrier, because everything takes place on a single CPU.
+ */
+ restart:
+ thr_kbpdata = chbi->cur_kbpdata;
+ barrier();
+
+ /* Normally we can keep the same debug register settings as the
+ * last time this task ran. But if the kernel breakpoints have
+ * changed or any user breakpoints have been registered or
+ * unregistered, we need to handle the updates and possibly
+ * send out some notifications.
+ */
+ if (unlikely(thbi->gennum != thr_kbpdata->gennum)) {
+ struct hw_breakpoint *bp;
+ int i;
+ int num;
+
+ thbi->gennum = thr_kbpdata->gennum;
+ arch_update_thbi(thbi, thr_kbpdata);
+ num = thr_kbpdata->num_kbps;
+
+ /* This code can be invoked while a debugger is actively
+ * updating the thread's breakpoint list (for example, if
+ * someone sends SIGKILL to the task). We use RCU to
+ * protect our access to the list pointers. */
+ thbi->num_installed = 0;
+ i = HB_NUM;
+ list_for_each_entry_rcu(bp, &thbi->thread_bps, node) {
+
+ /* If this register is allocated for kernel bps,
+ * don't install. Otherwise do. */
+ if (--i < num) {
+ if (bp->status == HW_BREAKPOINT_INSTALLED) {
+ if (bp->uninstalled)
+ (bp->uninstalled)(bp);
+ bp->status = HW_BREAKPOINT_REGISTERED;
+ }
+ } else {
+ ++thbi->num_installed;
+ if (bp->status != HW_BREAKPOINT_INSTALLED) {
+ bp->status = HW_BREAKPOINT_INSTALLED;
+ if (bp->installed)
+ (bp->installed)(bp);
+ }
+ }
+ }
+ }
+
+ /* Set the debug register */
+ arch_install_thbi(thbi);
+
+ /* Were there any kernel breakpoint changes while we were running? */
+ if (unlikely(chbi->cur_kbpdata != thr_kbpdata)) {
+
+ /* Some debug registers now be assigned to kernel bps and
+ * we might have messed them up. Reload all the kernel bps
+ * and then reload the thread bps.
+ */
+ arch_install_chbi(chbi);
+ goto restart;
+ }
+
+ rcu_read_unlock();
+ put_cpu_no_resched();
+}
+
+/*
+ * Install the debug register values for just the kernel, no thread.
+ */
+static void switch_to_none_hw_breakpoint(void)
+{
+ struct cpu_hw_breakpoint *chbi;
+
+ chbi = &per_cpu(cpu_info, get_cpu());
+ chbi->bp_task = NULL;
+
+ /* This routine gets called from only two places. In one
+ * the caller holds the hw_breakpoint_mutex; in the other
+ * interrupts are disabled. In either case, no kernel
+ * breakpoint updates can arrive while the routine runs.
+ * So we don't need to use RCU.
+ */
+ arch_install_none(chbi);
+ put_cpu_no_resched();
+}
+
+/*
+ * Update the debug registers on this CPU.
+ */
+static void update_this_cpu(void *unused)
+{
+ struct cpu_hw_breakpoint *chbi;
+ struct task_struct *tsk = current;
+
+ chbi = &per_cpu(cpu_info, get_cpu());
+
+ /* Install both the kernel and the user breakpoints */
+ arch_install_chbi(chbi);
+ if (test_tsk_thread_flag(tsk, TIF_DEBUG))
+ switch_to_thread_hw_breakpoint(tsk);
+
+ put_cpu_no_resched();
+}
+
+/*
+ * Tell all CPUs to update their debug registers.
+ *
+ * The caller must hold hw_breakpoint_mutex.
+ */
+static void update_all_cpus(void)
+{
+ /* We don't need to use any sort of memory barrier. The IPI
+ * carried out by on_each_cpu() includes its own barriers.
+ */
+ on_each_cpu(update_this_cpu, NULL, 0, 0);
+ synchronize_rcu();
+}
+
+/*
+ * Load the debug registers during startup of a CPU.
+ */
+void load_debug_registers(void)
+{
+ unsigned long flags;
+
+ /* Prevent IPIs for new kernel breakpoint updates */
+ local_irq_save(flags);
+
+ rcu_read_lock();
+ update_this_cpu(NULL);
+ rcu_read_unlock();
+
+ local_irq_restore(flags);
+}
+
+/*
+ * Take the 4 highest-priority breakpoints in a thread and accumulate
+ * their priorities in tprio. Highest-priority entry is in tprio[3].
+ */
+static void accum_thread_tprio(struct thread_hw_breakpoint *thbi)
+{
+ int i;
+
+ for (i = HB_NUM - 1; i >= 0 && thbi->bps[i]; --i)
+ tprio[i] = max(tprio[i], thbi->bps[i]->priority);
+}
+
+/*
+ * Recalculate the value of the tprio array, the maximum priority levels
+ * requested by user breakpoints in all threads.
+ *
+ * Each thread has a list of registered breakpoints, kept in order of
+ * decreasing priority. We'll set tprio[0] to the maximum priority of
+ * the first entries in all the lists, tprio[1] to the maximum priority
+ * of the second entries in all the lists, etc. In the end, we'll know
+ * that no thread requires breakpoints with priorities higher than the
+ * values in tprio.
+ *
+ * The caller must hold hw_breakpoint_mutex.
+ */
+static void recalc_tprio(void)
+{
+ struct thread_hw_breakpoint *thbi;
+
+ memset(tprio, 0, sizeof tprio);
+
+ /* Loop through all threads having registered breakpoints
+ * and accumulate the maximum priority levels in tprio.
+ */
+ list_for_each_entry(thbi, &thread_list, node)
+ accum_thread_tprio(thbi);
+}
+
+/*
+ * Decide how many debug registers will be allocated to kernel breakpoints
+ * and consequently, how many remain available for user breakpoints.
+ *
+ * The priorities of the entries in the list of registered kernel bps
+ * are compared against the priorities stored in tprio[]. The 4 highest
+ * winners overall get to be installed in a debug register; num_kpbs
+ * keeps track of how many of those winners come from the kernel list.
+ *
+ * If num_kbps changes, or if a kernel bp changes its installation status,
+ * then call update_all_cpus() so that the debug registers will be set
+ * correctly on every CPU. If neither condition holds then the set of
+ * kernel bps hasn't changed, and nothing more needs to be done.
+ *
+ * The caller must hold hw_breakpoint_mutex.
+ */
+static void balance_kernel_vs_user(void)
+{
+ int k, u;
+ int changed = 0;
+ struct hw_breakpoint *bp;
+ struct kernel_bp_data *new_kbpdata;
+
+ /* Determine how many debug registers are available for kernel
+ * breakpoints as opposed to user breakpoints, based on the
+ * priorities. Ties are resolved in favor of user bps.
+ */
+ k = 0; /* Next kernel bp to allocate */
+ u = HB_NUM - 1; /* Next user bp to allocate */
+ bp = list_entry(kernel_bps.next, struct hw_breakpoint, node);
+ while (k <= u) {
+ if (&bp->node == &kernel_bps || tprio[u] >= bp->priority)
+ --u; /* User bps win a slot */
+ else {
+ ++k; /* Kernel bp wins a slot */
+ if (bp->status != HW_BREAKPOINT_INSTALLED)
+ changed = 1;
+ bp = list_entry(bp->node.next, struct hw_breakpoint,
+ node);
+ }
+ }
+ if (k != cur_kbpdata->num_kbps)
+ changed = 1;
+
+ /* Notify the remaining kernel breakpoints that they are about
+ * to be uninstalled.
+ */
+ list_for_each_entry_from(bp, &kernel_bps, node) {
+ if (bp->status == HW_BREAKPOINT_INSTALLED) {
+ if (bp->uninstalled)
+ (bp->uninstalled)(bp);
+ bp->status = HW_BREAKPOINT_REGISTERED;
+ changed = 1;
+ }
+ }
+
+ if (changed) {
+ cur_kbpindex ^= 1;
+ new_kbpdata = &kbpdata[cur_kbpindex];
+ new_kbpdata->gennum = cur_kbpdata->gennum + 1;
+ new_kbpdata->num_kbps = k;
+ arch_new_kbpdata(new_kbpdata);
+ u = 0;
+ list_for_each_entry(bp, &kernel_bps, node) {
+ if (u >= k)
+ break;
+ new_kbpdata->bps[u] = bp;
+ ++u;
+ }
+ rcu_assign_pointer(cur_kbpdata, new_kbpdata);
+
+ /* Tell all the CPUs to update their debug registers */
+ update_all_cpus();
+
+ /* Notify the breakpoints that just got installed */
+ for (u = 0; u < k; ++u) {
+ bp = new_kbpdata->bps[u];
+ if (bp->status != HW_BREAKPOINT_INSTALLED) {
+ bp->status = HW_BREAKPOINT_INSTALLED;
+ if (bp->installed)
+ (bp->installed)(bp);
+ }
+ }
+ }
+}
+
+/*
+ * Return the pointer to a thread's hw_breakpoint info area,
+ * and try to allocate one if it doesn't exist.
+ *
+ * The caller must hold hw_breakpoint_mutex.
+ */
+static struct thread_hw_breakpoint *alloc_thread_hw_breakpoint(
+ struct task_struct *tsk)
+{
+ if (!tsk->thread.hw_breakpoint_info && !(tsk->flags & PF_EXITING)) {
+ struct thread_hw_breakpoint *thbi;
+
+ thbi = kzalloc(sizeof(struct thread_hw_breakpoint),
+ GFP_KERNEL);
+ if (thbi) {
+ INIT_LIST_HEAD(&thbi->node);
+ INIT_LIST_HEAD(&thbi->thread_bps);
+
+ /* Force an update the next time tsk runs */
+ thbi->gennum = cur_kbpdata->gennum - 2;
+ tsk->thread.hw_breakpoint_info = thbi;
+ }
+ }
+ return tsk->thread.hw_breakpoint_info;
+}
+
+/*
+ * Erase all the hardware breakpoint info associated with a thread.
+ *
+ * If tsk != current then tsk must not be usable (for example, a
+ * child being cleaned up from a failed fork).
+ */
+void flush_thread_hw_breakpoint(struct task_struct *tsk)
+{
+ struct thread_hw_breakpoint *thbi = tsk->thread.hw_breakpoint_info;
+ struct hw_breakpoint *bp;
+
+ if (!thbi)
+ return;
+ mutex_lock(&hw_breakpoint_mutex);
+
+ /* Let the breakpoints know they are being uninstalled */
+ list_for_each_entry(bp, &thbi->thread_bps, node) {
+ if (bp->status == HW_BREAKPOINT_INSTALLED && bp->uninstalled)
+ (bp->uninstalled)(bp);
+ bp->status = 0;
+ }
+
+ /* Remove tsk from the list of all threads with registered bps */
+ list_del(&thbi->node);
+
+ /* The thread no longer has any breakpoints associated with it */
+ clear_tsk_thread_flag(tsk, TIF_DEBUG);
+ tsk->thread.hw_breakpoint_info = NULL;
+ kfree(thbi);
+
+ /* Recalculate and rebalance the kernel-vs-user priorities */
+ recalc_tprio();
+ balance_kernel_vs_user();
+
+ /* Actually uninstall the breakpoints if necessary */
+ if (tsk == current)
+ switch_to_none_hw_breakpoint();
+ mutex_unlock(&hw_breakpoint_mutex);
+}
+
+/*
+ * Copy the hardware breakpoint info from a thread to its cloned child.
+ */
+int copy_thread_hw_breakpoint(struct task_struct *tsk,
+ struct task_struct *child, unsigned long clone_flags)
+{
+ /* We will assume that breakpoint settings are not inherited
+ * and the child starts out with no debug registers set.
+ * But what about CLONE_PTRACE?
+ */
+ clear_tsk_thread_flag(child, TIF_DEBUG);
+ return 0;
+}
+
+/*
+ * Store the highest-priority thread breakpoint entries in an array.
+ */
+static void store_thread_bp_array(struct thread_hw_breakpoint *thbi)
+{
+ struct hw_breakpoint *bp;
+ int i;
+
+ i = HB_NUM - 1;
+ list_for_each_entry(bp, &thbi->thread_bps, node) {
+ thbi->bps[i] = bp;
+ arch_store_thread_bp_array(thbi, bp, i);
+ if (--i < 0)
+ break;
+ }
+ while (i >= 0)
+ thbi->bps[i--] = NULL;
+
+ /* Force an update the next time this task runs */
+ thbi->gennum = cur_kbpdata->gennum - 2;
+}
+
+/*
+ * Insert a new breakpoint in a priority-sorted list.
+ * Return the bp's index in the list.
+ *
+ * Thread invariants:
+ * tsk_thread_flag(tsk, TIF_DEBUG) set implies
+ * tsk->thread.hw_breakpoint_info is not NULL.
+ * tsk_thread_flag(tsk, TIF_DEBUG) set iff thbi->thread_bps is non-empty
+ * iff thbi->node is on thread_list.
+ */
+static int insert_bp_in_list(struct hw_breakpoint *bp,
+ struct thread_hw_breakpoint *thbi, struct task_struct *tsk)
+{
+ struct list_head *head;
+ int pos;
+ struct hw_breakpoint *temp_bp;
+
+ /* tsk and thbi are NULL for kernel bps, non-NULL for user bps */
+ if (tsk)
+ head = &thbi->thread_bps;
+ else
+ head = &kernel_bps;
+
+ /* Equal-priority breakpoints get listed first-come-first-served */
+ pos = 0;
+ list_for_each_entry(temp_bp, head, node) {
+ if (bp->priority > temp_bp->priority)
+ break;
+ ++pos;
+ }
+ bp->status = HW_BREAKPOINT_REGISTERED;
+ list_add_tail(&bp->node, &temp_bp->node);
+
+ if (tsk) {
+ store_thread_bp_array(thbi);
+
+ /* Is this the thread's first registered breakpoint? */
+ if (list_empty(&thbi->node)) {
+ set_tsk_thread_flag(tsk, TIF_DEBUG);
+ list_add(&thbi->node, &thread_list);
+ }
+ }
+ return pos;
+}
+
+/*
+ * Remove a breakpoint from its priority-sorted list.
+ *
+ * See the invariants mentioned above.
+ */
+static void remove_bp_from_list(struct hw_breakpoint *bp,
+ struct thread_hw_breakpoint *thbi, struct task_struct *tsk)
+{
+ /* Remove bp from the thread's/kernel's list. If the list is now
+ * empty we must clear the TIF_DEBUG flag. But keep the
+ * thread_hw_breakpoint structure, so that the virtualized debug
+ * register values will remain valid.
+ */
+ list_del(&bp->node);
+ if (tsk) {
+ store_thread_bp_array(thbi);
+
+ if (list_empty(&thbi->thread_bps)) {
+ list_del_init(&thbi->node);
+ clear_tsk_thread_flag(tsk, TIF_DEBUG);
+ }
+ }
+
+ /* Tell the breakpoint it is being uninstalled */
+ if (bp->status == HW_BREAKPOINT_INSTALLED && bp->uninstalled)
+ (bp->uninstalled)(bp);
+ bp->status = 0;
+}
+
+/*
+ * Validate the settings in a hw_breakpoint structure.
+ */
+static int validate_settings(struct hw_breakpoint *bp, struct task_struct *tsk,
+ unsigned long address, unsigned len, unsigned type)
+{
+ int rc = -EINVAL;
+ unsigned long align;
+
+ switch (type) {
+#ifdef HW_BREAKPOINT_EXECUTE
+ case HW_BREAKPOINT_EXECUTE:
+ if (len != HW_BREAKPOINT_LEN_EXECUTE)
+ return rc;
+ break;
+#endif
+#ifdef HW_BREAKPOINT_READ
+ case HW_BREAKPOINT_READ: break;
+#endif
+#ifdef HW_BREAKPOINT_WRITE
+ case HW_BREAKPOINT_WRITE: break;
+#endif
+#ifdef HW_BREAKPOINT_RW
+ case HW_BREAKPOINT_RW: break;
+#endif
+ default:
+ return rc;
+ }
+
+ switch (len) {
+#ifdef HW_BREAKPOINT_LEN_1
+ case HW_BREAKPOINT_LEN_1:
+ align = 0;
+ break;
+#endif
+#ifdef HW_BREAKPOINT_LEN_2
+ case HW_BREAKPOINT_LEN_2:
+ align = 1;
+ break;
+#endif
+#ifdef HW_BREAKPOINT_LEN_4
+ case HW_BREAKPOINT_LEN_4:
+ align = 3;
+ break;
+#endif
+#ifdef HW_BREAKPOINT_LEN_8
+ case HW_BREAKPOINT_LEN_8:
+ align = 7;
+ break;
+#endif
+ default:
+ return rc;
+ }
+
+ /* Check that the low-order bits of the address are appropriate
+ * for the alignment implied by len.
+ */
+ if (address & align)
+ return rc;
+
+ /* Check that the virtual address is in the proper range */
+ if (tsk) {
+ if (!arch_check_va_in_userspace(address, tsk))
+ return rc;
+ } else {
+ if (!arch_check_va_in_kernelspace(address))
+ return rc;
+ }
+
+ if (bp->triggered) {
+ rc = 0;
+ arch_store_info(bp, address, len, type);
+ }
+ return rc;
+}
+
+/*
+ * Actual implementation of register_user_hw_breakpoint.
+ */
+static int __register_user_hw_breakpoint(struct task_struct *tsk,
+ struct hw_breakpoint *bp,
+ unsigned long address, unsigned len, unsigned type)
+{
+ int rc;
+ struct thread_hw_breakpoint *thbi;
+ int pos;
+
+ bp->status = 0;
+ rc = validate_settings(bp, tsk, address, len, type);
+ if (rc)
+ return rc;
+
+ thbi = alloc_thread_hw_breakpoint(tsk);
+ if (!thbi)
+ return -ENOMEM;
+
+ /* Insert bp in the thread's list */
+ pos = insert_bp_in_list(bp, thbi, tsk);
+ arch_register_user_hw_breakpoint(bp, thbi);
+
+ /* Update and rebalance the priorities. We don't need to go through
+ * the list of all threads; adding a breakpoint can only cause the
+ * priorities for this thread to increase.
+ */
+ accum_thread_tprio(thbi);
+ balance_kernel_vs_user();
+
+ /* Did bp get allocated to a debug register? We can tell from its
+ * position in the list. The number of registers allocated to
+ * kernel breakpoints is num_kbps; all the others are available for
+ * user breakpoints. If bp's position in the priority-ordered list
+ * is low enough, it will get a register.
+ */
+ if (pos < HB_NUM - cur_kbpdata->num_kbps) {
+ rc = 1;
+
+ /* Does it need to be installed right now? */
+ if (tsk == current)
+ switch_to_thread_hw_breakpoint(tsk);
+ /* Otherwise it will get installed the next time tsk runs */
+ }
+
+ return rc;
+}
+
+/**
+ * register_user_hw_breakpoint - register a hardware breakpoint for user space
+ * @tsk: the task in whose memory space the breakpoint will be set
+ * @bp: the breakpoint structure to register
+ * @address: location (virtual address) of the breakpoint
+ * @len: encoded extent of the breakpoint address (1, 2, 4, or 8 bytes)
+ * @type: breakpoint type (read-only, write-only, read-write, or execute)
+ *
+ * This routine registers a breakpoint to be associated with @tsk's
+ * memory space and active only while @tsk is running. It does not
+ * guarantee that the breakpoint will be allocated to a debug register
+ * immediately; there may be other higher-priority breakpoints registered
+ * which require the use of all the debug registers.
+ *
+ * @tsk will normally be a process being debugged by the current process,
+ * but it may also be the current process.
+ *
+ * @address, @len, and @type are checked for validity and stored in
+ * encoded form in @bp. @bp->triggered and @bp->priority must be set
+ * properly.
+ *
+ * Returns 1 if @bp is allocated to a debug register, 0 if @bp is
+ * registered but not allowed to be installed, otherwise a negative error
+ * code.
+ */
+int register_user_hw_breakpoint(struct task_struct *tsk,
+ struct hw_breakpoint *bp,
+ const void __user *address, unsigned len, unsigned type)
+{
+ int rc;
+
+ mutex_lock(&hw_breakpoint_mutex);
+ rc = __register_user_hw_breakpoint(tsk, bp,
+ (unsigned long) address, len, type);
+ mutex_unlock(&hw_breakpoint_mutex);
+ return rc;
+}
+
+/*
+ * Actual implementation of unregister_user_hw_breakpoint.
+ */
+static void __unregister_user_hw_breakpoint(struct task_struct *tsk,
+ struct hw_breakpoint *bp)
+{
+ struct thread_hw_breakpoint *thbi = tsk->thread.hw_breakpoint_info;
+
+ if (!bp->status)
+ return; /* Not registered */
+
+ /* Remove bp from the thread's list */
+ remove_bp_from_list(bp, thbi, tsk);
+ arch_unregister_user_hw_breakpoint(bp, thbi);
+
+ /* Recalculate and rebalance the kernel-vs-user priorities,
+ * and actually uninstall bp if necessary.
+ */
+ recalc_tprio();
+ balance_kernel_vs_user();
+ if (tsk == current)
+ switch_to_thread_hw_breakpoint(tsk);
+}
+
+/**
+ * unregister_user_hw_breakpoint - unregister a hardware breakpoint for user space
+ * @tsk: the task in whose memory space the breakpoint is registered
+ * @bp: the breakpoint structure to unregister
+ *
+ * Uninstalls and unregisters @bp.
+ */
+void unregister_user_hw_breakpoint(struct task_struct *tsk,
+ struct hw_breakpoint *bp)
+{
+ mutex_lock(&hw_breakpoint_mutex);
+ __unregister_user_hw_breakpoint(tsk, bp);
+ mutex_unlock(&hw_breakpoint_mutex);
+}
+
+/**
+ * register_kernel_hw_breakpoint - register a hardware breakpoint for kernel space
+ * @bp: the breakpoint structure to register
+ * @address: location (virtual address) of the breakpoint
+ * @len: encoded extent of the breakpoint address (1, 2, 4, or 8 bytes)
+ * @type: breakpoint type (read-only, write-only, read-write, or execute)
+ *
+ * This routine registers a breakpoint to be active at all times. It
+ * does not guarantee that the breakpoint will be allocated to a debug
+ * register immediately; there may be other higher-priority breakpoints
+ * registered which require the use of all the debug registers.
+ *
+ * @address, @len, and @type are checked for validity and stored in
+ * encoded form in @bp. @bp->triggered and @bp->priority must be set
+ * properly.
+ *
+ * Returns 1 if @bp is allocated to a debug register, 0 if @bp is
+ * registered but not allowed to be installed, otherwise a negative error
+ * code.
+ */
+int register_kernel_hw_breakpoint(struct hw_breakpoint *bp,
+ const void *address, unsigned len, unsigned type)
+{
+ int rc;
+ int pos;
+
+ bp->status = 0;
+ rc = validate_settings(bp, NULL, (unsigned long) address, len, type);
+ if (rc)
+ return rc;
+
+ mutex_lock(&hw_breakpoint_mutex);
+
+ /* Insert bp in the kernel's list */
+ pos = insert_bp_in_list(bp, NULL, NULL);
+ arch_register_kernel_hw_breakpoint(bp);
+
+ /* Rebalance the priorities. This will install bp if it
+ * was allocated a debug register.
+ */
+ balance_kernel_vs_user();
+
+ /* Did bp get allocated to a debug register? We can tell from its
+ * position in the list. The number of registers allocated to
+ * kernel breakpoints is num_kbps; all the others are available for
+ * user breakpoints. If bp's position in the priority-ordered list
+ * is low enough, it will get a register.
+ */
+ if (pos < cur_kbpdata->num_kbps)
+ rc = 1;
+
+ mutex_unlock(&hw_breakpoint_mutex);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(register_kernel_hw_breakpoint);
+
+/**
+ * unregister_kernel_hw_breakpoint - unregister a hardware breakpoint for kernel space
+ * @bp: the breakpoint structure to unregister
+ *
+ * Uninstalls and unregisters @bp.
+ */
+void unregister_kernel_hw_breakpoint(struct hw_breakpoint *bp)
+{
+ if (!bp->status)
+ return; /* Not registered */
+ mutex_lock(&hw_breakpoint_mutex);
+
+ /* Remove bp from the kernel's list */
+ remove_bp_from_list(bp, NULL, NULL);
+ arch_unregister_kernel_hw_breakpoint(bp);
+
+ /* Rebalance the priorities. This will uninstall bp if it
+ * was allocated a debug register.
+ */
+ balance_kernel_vs_user();
+
+ mutex_unlock(&hw_breakpoint_mutex);
+}
+EXPORT_SYMBOL_GPL(unregister_kernel_hw_breakpoint);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-06-25 22:55    [W:3.332 / U:0.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site