lkml.org 
[lkml]   [2007]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjecthsm violation
Hi all!

I found the following messages in the kernel log:
---------------------------------

[ 45.288000] set_level status: 0
[ 45.572000] set_level status: 0
[ 45.740000] set_level status: 0
[ 46.820000] set_level status: 0
[ 47.092000] set_level status: 0
[ 61.176000] ata1.00: exception Emask 0x2 SAct 0x2 SErr 0x0 action 0x2
frozen
[ 61.176000] ata1.00: (spurious completions during NCQ issue=0x0
SAct=0x2 FIS=005040a1:00000004)
[ 61.176000] ata1.00: cmd 60/08:08:37:cc:00/00:00:0c:00:00/40 tag 1
cdb 0x0 data 4096 in
[ 61.176000] res 50/00:08:27:3c:ed/00:00:0b:00:00/40 Emask
0x2 (HSM violation)
[ 61.488000] ata1: soft resetting port
[ 61.660000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 61.660000] ata1.00: ata_hpa_resize 1: sectors = 312581808,
hpa_sectors = 312581808
[ 61.660000] ata1.00: ata_hpa_resize 1: sectors = 312581808,
hpa_sectors = 312581808
[ 61.660000] ata1.00: configured for UDMA/100
[ 61.660000] ata1: EH complete
[ 61.660000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 61.660000] sda: Write Protect is off
[ 61.660000] sda: Mode Sense: 00 3a 00 00
[ 61.660000] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 101.972000] set_level status: 0
[ 102.200000] set_level status: 0
[ 102.404000] set_level status: 0
[ 103.284000] set_level status: 0
[ 103.476000] set_level status: 0
[ 103.912000] set_level status: 0
[ 104.284000] set_level status: 0
[ 104.660000] set_level status: 0
[ 113.576000] set_level status: 0
[ 559.020000] set_level status: 0
[ 559.476000] set_level status: 0
[ 559.632000] set_level status: 0
[ 561.744000] set_level status: 0
[ 563.560000] set_level status: 0
[ 564.224000] set_level status: 0
[ 564.688000] set_level status: 0
[ 567.096000] set_level status: 0
[ 567.712000] set_level status: 0
[ 569.060000] set_level status: 0
[ 569.524000] set_level status: 0
[ 569.828000] set_level status: 0
[ 570.204000] set_level status: 0
[ 570.504000] set_level status: 0
[ 571.724000] set_level status: 0
[ 572.012000] set_level status: 0
[ 572.360000] set_level status: 0
[ 572.696000] set_level status: 0
[ 573.016000] set_level status: 0
[ 574.092000] set_level status: 0
[ 574.348000] set_level status: 0
[ 604.476000] set_level status: 0
[ 604.764000] set_level status: 0
[ 605.048000] set_level status: 0
[ 605.244000] set_level status: 0
[ 605.400000] set_level status: 0
[ 605.540000] set_level status: 0
[ 605.688000] set_level status: 0
[ 606.528000] set_level status: 0
[ 606.820000] set_level status: 0
[ 608.336000] set_level status: 0

----------------------------------------------

This is the result of hdparm -I /dev/sda:


/dev/sda:

ATA device, with non-removable media
Model Number: Hitachi HTS541616J9SA00
Serial Number: SB2461***V3AWE
Firmware Revision: SB4OC70P
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 1
Supported: 7 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 312581808
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 128 (0x80)
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
* SATA-I signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
Non-Zero buffer offsets in DMA Setup FIS
DMA Setup Auto-Activate optimization
Device-initiated interface power management
In-order data delivery
* Software settings preservation
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
82min for SECURITY ERASE UNIT.
Checksum: correct

-----------------------------------------------------


I'm using Ubuntu feisty fawn (2.6.20-16-generic) on an Acer Travelmate
6292 (Santa Rosa).

Many thanks!

Enrico


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-06-24 14:35    [W:0.048 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site