Messages in this thread | | | Date | Fri, 22 Jun 2007 16:56:57 -0600 | From | Robert Hancock <> | Subject | Re: Broadcom (bnx2) on PE1950/2950 failure |
| |
Fortier,Vincent [Montreal] wrote: > Here is the output of the dmesg with now the appropriate order: > [root@urpdev1 /etc]# dmesg | grep -i eth > [ 120.685696] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 > v1.5.8.1 (May 7, 2007) > [ 120.703846] eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X > 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 0019b9c8eedc > [ 120.735350] eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X > 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 0019b9c8eede > [ 120.921403] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network > Connection > [ 121.069025] e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network > Connection > [ 267.720475] bnx2: eth0: using MSI > [ 270.832235] bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex, receive > & transmit flow control ON > > > But still, there is a problem with the second Broadcom port (eth1): > [root@urpdev1 /etc]# mii-tool > eth0: negotiated 100baseTx-FD flow-control, link ok > SIOCGMIIPHY on 'eth1' failed: Resource temporarily unavailable > eth2: negotiated 100baseTx-FD flow-control, link ok > eth3: negotiated 100baseTx-FD flow-control, link ok > > I don't get it? > > Help appreciated.
Is that interface down? mii-tool probably doesn't work in that case..
-- Robert Hancock Saskatoon, SK, Canada To email, remove "nospam" from hancockr@nospamshaw.ca Home Page: http://www.roberthancock.com/
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |