lkml.org 
[lkml]   [2007]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] retrieve VBE EDID/DDC info independent of used video mode
The code to retrieve this information was (a) inside a CONFIG_VIDEO_SELECT
section and (b) protected by a check of a variable (vbe_version) that
would get initialized only when a VESA mode was selected on the command
line.

Signed-off-by: Jan Beulich <jbeulich@novell.com>

arch/i386/boot/video.S | 28 ++++++++++++++++++----------
1 files changed, 18 insertions(+), 10 deletions(-)

--- linux-2.6.22-rc5/arch/i386/boot/video.S 2007-04-26 05:08:32.000000000 +0200
+++ 2.6.22-rc5-edid-no-vesa-mode/arch/i386/boot/video.S 2007-06-19 14:34:50.000000000 +0200
@@ -96,6 +96,7 @@
#define PARAM_LFB_PAGES 0x32
#define PARAM_VESA_ATTRIB 0x34
#define PARAM_CAPABILITIES 0x36
+#define PARAM_EDID_INFO 0x140

/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */
#ifdef CONFIG_VIDEO_RETAIN
@@ -132,8 +133,8 @@ vid1:
#ifdef CONFIG_VIDEO_RETAIN
call restore_screen # Restore screen contents
#endif /* CONFIG_VIDEO_RETAIN */
- call store_edid
#endif /* CONFIG_VIDEO_SELECT */
+ call store_edid
call mode_params # Store mode parameters
popw %ds # Restore original DS
ret
@@ -571,16 +572,12 @@ setr1: lodsw
jmp _m_s

check_vesa:
-#ifdef CONFIG_FIRMWARE_EDID
leaw modelist+1024, %di
movw $0x4f00, %ax
int $0x10
cmpw $0x004f, %ax
jnz setbad

- movw 4(%di), %ax
- movw %ax, vbe_version
-#endif
leaw modelist+1024, %di
subb $VIDEO_FIRST_VESA>>8, %bh
movw %bx, %cx # Get mode information structure
@@ -1935,6 +1932,7 @@ skip10: movb %ah, %al
popw %cx
popw %ax
ret
+#endif /* CONFIG_VIDEO_SELECT */

store_edid:
#ifdef CONFIG_FIRMWARE_EDID
@@ -1945,18 +1943,28 @@ store_edid:
pushw %dx
pushw %di

+ pushw %ds
+ popw %es
+ leaw modelist, %di
+ movw $0x4f00, %ax
+ int $0x10
+ cmpw $0x004f, %ax
+ setne %dl
+ cmpw $0x0200, 4(%di) # only do EDID on >= VBE2.0
+ adc %dl, %dl
+
pushw %fs
popw %es

movl $0x13131313, %eax # memset block with 0x13
movw $32, %cx
- movw $0x140, %di
+ movw $PARAM_EDID_INFO, %di
cld
rep
stosl

- cmpw $0x0200, vbe_version # only do EDID on >= VBE2.0
- jl no_edid
+ testb %dl, %dl
+ jnz no_edid

pushw %es # save ES
xorw %di, %di # Report Capability
@@ -1978,7 +1986,7 @@ store_edid:
movw $0x01, %bx
movw $0x00, %cx
movw $0x00, %dx
- movw $0x140, %di
+ movw $PARAM_EDID_INFO, %di
int $0x10

no_edid:
@@ -1991,6 +1999,7 @@ no_edid:
#endif
ret

+#ifdef CONFIG_VIDEO_SELECT
# VIDEO_SELECT-only variables
mt_end: .word 0 # End of video mode table if built
edit_buf: .space 6 # Line editor buffer
@@ -2000,7 +2009,6 @@ do_restore: .byte 0 # Screen contents al
svga_prefix: .byte VIDEO_FIRST_BIOS>>8 # Default prefix for BIOS modes
graphic_mode: .byte 0 # Graphic mode with a linear frame buffer
dac_size: .byte 6 # DAC bit depth
-vbe_version: .word 0 # VBE bios version

# Status messages
keymsg: .ascii "Press <RETURN> to see video modes available, "


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-06-19 18:21    [W:0.207 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site