lkml.org 
[lkml]   [2007]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] m68knommu: remove old cache management cruft from mm code
Remove cache management cruft. This code is dead, all the cache
manangement functions for the ColdFire exist in the header file
include/asm-m68knommu/cacheflush.h.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---



diff -Naur linux-2.6.21/arch/m68knommu/mm/memory.c linux-2.6.21-uc0/arch/m68knommu/mm/memory.c
--- linux-2.6.21/arch/m68knommu/mm/memory.c 2007-05-01 17:12:42.000000000 +1000
+++ linux-2.6.21-uc0/arch/m68knommu/mm/memory.c 2007-05-01 17:16:11.000000000 +1000
@@ -17,90 +17,14 @@
#include <linux/types.h>
#include <linux/slab.h>

-#include <asm/setup.h>
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
-#include <asm/traps.h>
-#include <asm/io.h>

/*
- * cache_clear() semantics: Clear any cache entries for the area in question,
- * without writing back dirty entries first. This is useful if the data will
- * be overwritten anyway, e.g. by DMA to memory. The range is defined by a
- * _physical_ address.
- */
-
-void cache_clear (unsigned long paddr, int len)
-{
-}
-
-
-/*
- * Define cache invalidate functions. The ColdFire 5407 is really
- * the only processor that needs to do some work here. Anything
- * that has separate data and instruction caches will be a problem.
- */
-#ifdef CONFIG_M5407
-
-static __inline__ void cache_invalidate_lines(unsigned long paddr, int len)
-{
- unsigned long sset, eset;
-
- sset = (paddr & 0x00000ff0);
- eset = ((paddr + len) & 0x0000ff0) + 0x10;
-
- __asm__ __volatile__ (
- "nop\n\t"
- "clrl %%d0\n\t"
- "1:\n\t"
- "movel %0,%%a0\n\t"
- "addl %%d0,%%a0\n\t"
- "2:\n\t"
- ".word 0xf4e8\n\t"
- "addl #0x10,%%a0\n\t"
- "cmpl %1,%%a0\n\t"
- "blt 2b\n\t"
- "addql #1,%%d0\n\t"
- "cmpil #4,%%d0\n\t"
- "bne 1b"
- : : "a" (sset), "a" (eset) : "d0", "a0" );
-}
-
-#else
-#define cache_invalidate_lines(a,b)
-#endif
-
-
-/*
- * cache_push() semantics: Write back any dirty cache data in the given area,
- * and invalidate the range in the instruction cache. It needs not (but may)
- * invalidate those entries also in the data cache. The range is defined by a
- * _physical_ address.
- */
-
-void cache_push (unsigned long paddr, int len)
-{
- cache_invalidate_lines(paddr, len);
-}
-
-
-/*
- * cache_push_v() semantics: Write back any dirty cache data in the given
- * area, and invalidate those entries at least in the instruction cache. This
- * is intended to be used after data has been written that can be executed as
- * code later. The range is defined by a _user_mode_ _virtual_ address (or,
- * more exactly, the space is defined by the %sfc/%dfc register.)
- */
-
-void cache_push_v (unsigned long vaddr, int len)
-{
- cache_invalidate_lines(vaddr, len);
-}
-
-/* Map some physical address range into the kernel address space. The
- * code is copied and adapted from map_chunk().
+ * Map some physical address range into the kernel address space.
+ * The code is copied and adapted from map_chunk().
*/

unsigned long kernel_map(unsigned long paddr, unsigned long size,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2007-06-01 13:17    [W:0.029 / U:8.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site