lkml.org 
[lkml]   [2007]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] [POWERPC] 8xx: mpc885ads pcmcia support
On Tue, 8 May 2007 09:04:22 -0500
Kumar Gala wrote:

>
> On May 8, 2007, at 4:50 AM, Vitaly Bordug wrote:
>
> >
> > Adds support for PowerQuicc on-chip PCMCIA. The driver is
> > implemented as
> > of_device, so only arch/powerpc stuff is capable to use it, which
> > now implies only mpc885ads reference board.
> >
> > To cope with the code that should be hooked inside driver, but is
> > really
> > board specific (like set_voltage), global structure
> > mpc8xx_pcmcia_ops holds necessary function pointers that are filled
> > in the BSP code.
> >
> > Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
> > Acked-by: Arnd Bergmann <arnd@arndb.de>
> > Acked-by: Olof Johansson <olof@lixom.net>
> >
> > ---
> >
> > arch/powerpc/boot/dts/mpc885ads.dts | 12 +
> > arch/powerpc/platforms/8xx/m8xx_setup.c | 5
> > arch/powerpc/platforms/8xx/mpc885ads.h | 8 +
> > arch/powerpc/platforms/8xx/mpc885ads_setup.c | 72 +++++
> > arch/powerpc/sysdev/fsl_soc.c | 13 +
> > arch/powerpc/sysdev/mpc8xx_pic.h | 2
> > drivers/pcmcia/Kconfig | 1
> > drivers/pcmcia/m8xx_pcmcia.c | 351 +++++++++++
> > +--------------
> > include/asm-powerpc/mpc8xx.h | 4
> > include/linux/fsl_devices.h | 5
> > 10 files changed, 287 insertions(+), 186 deletions(-)
> >
> > diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/
> > boot/dts/mpc885ads.dts
> > index 110bf61..0786ac1 100644
> > --- a/arch/powerpc/boot/dts/mpc885ads.dts
> > +++ b/arch/powerpc/boot/dts/mpc885ads.dts
> > @@ -112,6 +112,18 @@
> > compatible = "CPM";
> > };
> >
> > + pcmcia@0080 {
> > + #address-cells = <3>;
> > + #interrupt-cells = <1>;
> > + #size-cells = <2>;
> > + compatible = "fsl,pq-pcmcia";
>
> should this be fsl,pq1-pcmcia or fsl,8xx-pcmcia?
>

there were a note that eventually fsl may create some 8xx that is not cpm...
I really think pq and pq1 is the same, for pq2, 3 etc number passed explicitly.
> > + device_type = "pcmcia";
> > + reg = <80 80>;
> > + clock-frequency = <2faf080>;
>
> is the clock-freq fixed?
>
gotta check, will follow-up.

> > + interrupt-parent = <&mpc8xx-pic>;
> > + interrupts = <d 1>;
> > + };
> > +
> > cpm@ff000000 {
> > linux,phandle = <ff000000>;
> > #address-cells = <1>;
> > diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c
> > b/arch/powerpc/ platforms/8xx/m8xx_setup.c
> > index 0901dba..f169355 100644
> > --- a/arch/powerpc/platforms/8xx/m8xx_setup.c
> > +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
> > @@ -32,6 +32,7 @@
> > #include <linux/root_dev.h>
> > #include <linux/time.h>
> > #include <linux/rtc.h>
> > +#include <linux/fsl_devices.h>
> >
> > #include <asm/mmu.h>
> > #include <asm/reg.h>
> > @@ -49,6 +50,10 @@
> >
> > #include "sysdev/mpc8xx_pic.h"
> >
> > +#ifdef CONFIG_PCMCIA_M8XX
> > +struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
> > +#endif
> > +
> > void m8xx_calibrate_decr(void);
> > extern void m8xx_wdt_handler_install(bd_t *bp);
> > extern int cpm_pic_init(void);
> > diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/
> > platforms/8xx/mpc885ads.h
> > index 7c31aec..932b59a 100644
> > --- a/arch/powerpc/platforms/8xx/mpc885ads.h
> > +++ b/arch/powerpc/platforms/8xx/mpc885ads.h
> > @@ -91,5 +91,13 @@
> > #define SICR_ENET_MASK ((uint)0x00ff0000)
> > #define SICR_ENET_CLKRT ((uint)0x002c0000)
> >
> > +/*
> > + * Some internal interrupt registers use an 8-bit mask for the
> > interrupt
> > + * level instead of a number.
> > + */
> > +static inline uint mk_int_int_mask(uint mask) {
> > + return (1 << (7 - (mask/2)));
> > +}
>
> would this be better off in sysdev/mpc8xx_pic.h?
>
hmm, maybe.
> > +
> > #endif /* __ASM_MPC885ADS_H__ */
> > #endif /* __KERNEL__ */
> > diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/
> > powerpc/platforms/8xx/mpc885ads_setup.c
> > index a57b577..80e7214 100644
> > --- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
> > +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
> > @@ -22,6 +22,7 @@
> >
> > #include <linux/fs_enet_pd.h>
> > #include <linux/fs_uart_pd.h>
> > +#include <linux/fsl_devices.h>
> > #include <linux/mii.h>
> >
> > #include <asm/delay.h>
> > @@ -51,6 +52,70 @@ static void init_smc1_uart_ioports(struct
> > fs_uart_platform_info* fpi);
> > static void init_smc2_uart_ioports(struct fs_uart_platform_info*
> > fpi);
> > static void init_scc3_ioports(struct fs_platform_info* ptr);
> >
> > +#ifdef CONFIG_PCMCIA_M8XX
> > +static void pcmcia_hw_setup(int slot, int enable)
> > +{
> > + unsigned *bcsr_io;
> > +
> > + bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
> > + if (enable)
> > + clrbits32(bcsr_io, BCSR1_PCCEN);
> > + else
> > + setbits32(bcsr_io, BCSR1_PCCEN);
> > +
> > + iounmap(bcsr_io);
> > +}
> > +
> > +static int pcmcia_set_voltage(int slot, int vcc, int vpp)
> > +{
> > + u32 reg = 0;
> > + unsigned *bcsr_io;
> > +
> > + bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
> > +
> > + switch(vcc) {
> > + case 0:
> > + break;
> > + case 33:
> > + reg |= BCSR1_PCCVCC0;
> > + break;
> > + case 50:
> > + reg |= BCSR1_PCCVCC1;
> > + break;
> > + default:
> > + return 1;
> > + }
> > +
> > + switch(vpp) {
> > + case 0:
> > + break;
> > + case 33:
> > + case 50:
> > + if(vcc == vpp)
> > + reg |= BCSR1_PCCVPP1;
> > + else
> > + return 1;
> > + break;
> > + case 120:
> > + if ((vcc == 33) || (vcc == 50))
> > + reg |= BCSR1_PCCVPP0;
> > + else
> > + return 1;
> > + default:
> > + return 1;
> > + }
> > +
>
> seems like formatting is of (but that could just me my email reader)
>

darn it, I'll better Lindent this whole file too in 2-nd patch. plenty of whitespace, spacetabs, formatting issues...

> > + /* first, turn off all power */
> > + clrbits32(bcsr_io, 0x00610000);
> > +
> > + /* enable new powersettings */
> > + setbits32(bcsr_io, reg);
> > +
> > + iounmap(bcsr_io);
> > + return 0;
> > +}
> > +#endif
> > +
> > void __init mpc885ads_board_setup(void)
> > {
> > cpm8xx_t *cp;
> > @@ -115,6 +180,12 @@ void __init mpc885ads_board_setup(void)
> > immr_unmap(io_port);
> >
> > #endif
> > +
> > +#ifdef CONFIG_PCMCIA_M8XX
> > + /*Set up board specific hook-ups*/
> > + m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
> > + m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
> > +#endif
> > }
> >
> >
> > @@ -322,6 +393,7 @@ void init_smc_ioports(struct
> > fs_uart_platform_info *data)
> > }
> > }
> >
> > +
>
> extra whitespace?
yes, ok.

[snip]
--
Sincerely, Vitaly

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-08 19:35    [W:0.072 / U:5.652 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site