lkml.org 
[lkml]   [2007]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ExpressCard hotswap support?
Once upon a time, Daniel J Blueman <daniel.blueman@gmail.com> said:
> On 4 May, 01:20, Chris Adams <cmadams@hiwaay.net> wrote:
> >I've got a Thinkpad Z60m with an ExpressCard slot, and I got a Belkin
> >F5U250 GigE ExpressCard (Marvell 88E8053 chip using sky2 driver). It
> >appears that Linux only recognizes it if I insert the card with the
> >system powered off. If I hot-insert the card, nothing happens (no
> >messages logged, no PCI device shows up, nothing).
>
> The BIOS initialises and powers up the downstream PCI express port
> when it detects a card is present.
>
> When Linux boots, it enumerates the bus and sees it, but does not do
> prior configuration to enable, configure and cause link negotiation on
> all PCI express ports I believe; this requires chipset and (sometimes
> revision-) specific code, which wouldn't be so robust as the BIOS
> doing the footwork.

Actually, for me, loading pciehp with pciehp_force=1 set works.
--
Chris Adams <cmadams@hiwaay.net>
Systems and Network Administrator - HiWAAY Internet Services
I don't speak for anybody but myself - that's enough trouble.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-05 03:55    [W:0.046 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site