lkml.org 
[lkml]   [2007]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [2.6.22-rc1-mm1] vaio laptop (SZ72B) immediately resumes after STR
On Sun, May 20, 2007 at 06:22:23PM -0700, David Brownell wrote:
> On Sunday 20 May 2007, Mattia Dongili wrote:
> >
> > $ cat /proc/acpi/wakeup
> > Device S-state Status Sysfs node
> > PWRB S4 *enabled
> > S1F0 S4 disabled
> > S1F1 S4 disabled
> > S1F2 S4 disabled
> > S1F3 S4 disabled
> > S1F4 S4 disabled
> > S1F5 S4 disabled
> > S1F6 S4 disabled
> > S1F7 S4 disabled
> > TLAN S3 disabled pci:0000:07:00.0
> > DLAN S3 disabled
> > S6F0 S4 disabled
> > S6F1 S4 disabled
> > S6F2 S4 disabled
> > S6F3 S4 disabled
> > S6F4 S4 disabled
> > S6F5 S4 disabled
> > S6F6 S4 disabled
> > S6F7 S4 disabled
> > USB1 S3 disabled pci:0000:00:1d.0
> > USB2 S3 disabled pci:0000:00:1d.1
> > USB3 S3 disabled pci:0000:00:1d.2
> > USB4 S3 disabled pci:0000:00:1d.3
> > USB7 S3 disabled pci:0000:00:1d.7
> > SLT0 S4 disabled
> > LANC S3 disabled
> > EC0 S5 disabled
>
> That's strangely busy ... what ARE all those devices? :)

the S[16]F* are tons of acpi devices... don't know what they are, they
are attached to the PCI-E port
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
if you're interested the DSDT is here:
http://www.linux.it/~malattia/sony-laptop/DSDT.sz72b.type3.dsl

> But only the PCI ones -- or certain devices connected to USB
> root hubs -- could be affected by that patch.
>
> So another experiment you could do, if you want faster info
> than "git bisect" can provide, is building drivers for those
> PCI devices as modules (ehci-hcd, uhci-hcd, sky2) and then
> finding which one causes the trouble by removing them before
> STR.

it's ehci-hcd! and apart from the fact that removing it causes a BUG in
cpufreq no the system stays correctly asleep when suspended.

...
> > > My suspicion, based on the dmesg and seeing what drivers actually
> > > try to enable wakeup, would be the 'sky2' driver. The other two
> >
> > FWIW the sky2 is never functional upon resume, I need to ifdown, rmmod,
> > modprobe and ifup again to get some networking...
>
> Try "rmmod sky2" *before* suspend, to see if that matters.
>
> Also "rmmod uhci-hcd", which will keep USB from doing anything
> with that biometric thingie.
>
> I suspect one or the other of those will be the issue.

very close :)
--
mattia
:wq!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-21 04:11    [W:0.038 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site