lkml.org 
[lkml]   [2007]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: libata reset-seq merge broke sata_sil on sh
On Fri, May 11, 2007 at 11:39:20AM +0200, Tejun Heo wrote:
> Paul Mundt wrote:
> > Bumping the hardreset delay up does indeed fix it, I've had to bump it up
> > to 1200 before it started working (at 600 it still fails):
> >
> > [ 0.967379] scsi0 : sata_sil
> > [ 0.970425] scsi1 : sata_sil
> > [ 0.973298] ata1: SATA max UDMA/100 cmd 0xfd000280 ctl 0xfd00028a bmdma 0xfd000200 irq 0
> > [ 0.981331] ata2: SATA max UDMA/100 cmd 0xfd0002c0 ctl 0xfd0002ca bmdma 0xfd000208 irq 0
> > [ 1.299353] ata1: device not ready (errno=-19), forcing hardreset
> > [ 2.817893] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> > [ 2.826284] ata1.00: ata_hpa_resize 1: sectors = 39070080, hpa_sectors = 39070080
> > [ 2.831052] ata1.00: ATA-5: HHD424020F7SV00, 00MLA0A5, max UDMA/100
> > [ 2.837548] ata1.00: 39070080 sectors, multi 0: LBA
> > [ 2.842702] ata1.00: applying bridge limits
> > [ 2.854162] ata1.00: ata_hpa_resize 1: sectors = 39070080, hpa_sectors = 39070080
> > [ 2.858938] ata1.00: configured for UDMA/100
> > [ 3.172602] ata2: SATA link down (SStatus 0 SControl 310)
> > [ 3.175736] scsi 0:0:0:0: Direct-Access ATA HHD424020F7SV00 00ML PQ: 0 ANSI: 5
> >
> > I'm not sure if it matters or not, but this is an iVDR drive, so that
> > might also have additional implications.
>
> Don't have the flimsiest idea what an iVDR drive is but I take it that
> it's some sort of special purpose thing. :-)
>
http://www.ivdr.org

The GoVault appears to be a similar device, in that they're both
removeable cartridges.

> Gary, IIRC, the requirement for GoVault was 3secs, right? Paul, can you
> try to estimate the minimum required delay? Please go down by 100ms and
> report where it breaks.
>
800ms was the lowest it would work at, 700ms still breaks.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-12 05:53    [W:2.513 / U:0.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site