lkml.org 
[lkml]   [2007]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject2.6.21 broke arm scsi on qemu -M volatilepb
Date
Booting a 2.6.20 kernel under qemu works fine and gets me to a shell prompt, 
but booting a 2.6.21.1 kernel cycles endlessly on scsi, going:

Loading iSCSI transport class v2.0-724.
PCI: enabling device 0000:00:0c.0 (0140 -> 0143)
sym0: <895a> rev 0x0 at pci 0000:00:0c.0 irq 0
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
scsi 0:0:0:0: ABORT operation started.
scsi 0:0:0:0: ABORT operation timed-out.
scsi 0:0:0:0: DEVICE RESET operation started.
scsi 0:0:0:0: DEVICE RESET operation timed-out.
scsi 0:0:0:0: BUS RESET operation started.
scsi 0:0:0:0: BUS RESET operation timed-out.
scsi 0:0:0:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
...
And so on.

If you're interested in reproducing this, download the most recent
http://landley.net/hg/firmware snapshot (links up top), run "./build.sh
armv4l", and when that's done "cd build" and "./run-armv4l.sh".

Is this a known issue? A quick google for "arm scsi 2.6.21" didn't turn up
anything relevant...

Rob
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-11 06:03    [W:0.023 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site