lkml.org 
[lkml]   [2007]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Serial 8250: clear the lsr_break_flag at open
On Mon, Apr 30, 2007 at 05:08:59PM -0500, Corey Minyard wrote:
> I think I've spotted a bug in the 8250 code, but I'm not really
> sure.

Yes, clearing lsr_break_flag prior to opening the port is probably a good
thing.

> I'm having a hard time understanding why the lsr_break_flag
> is necessary.

Merely reading the LSR clears status bits. We read the LSR repeatedly
so that we can monitor the transmit FIFO when outputting serial console
messages.

This means that if you have a busy serial console, and you want to send
it a sysrq request, there's a chance that the break flag in the LSR will
be cleared by the transmit FIFO status polling code thereby being lost.

So, we need to remember that status, and we do this via the lsr_break_flag.

--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-05-01 11:33    [W:0.072 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site