lkml.org 
[lkml]   [2007]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Linux 2.6.21-rc6 - regressions update
From
Date
On Thu, 2007-04-05 at 19:50 -0700, Linus Torvalds wrote:
> Ok,
> I don't think there really is anything very interesting here, but we're
> hopefully whittling down the list of regressions, and fixing various
> random other small issues while at it.
>
> Some smallish MIPS updates, networking (and network driver) fixes, removal
> of a long obsolete framebuffer driver, etc etc. The shortlog really tells
> the story.
>
> We should be getting close to a 2.6.21 release, so please update any
> regression reports you've done,

regression update for 21-rc6:

1) all s2ram and NO_HZ related things seem to be resolved on my macbook
pro, also
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y

don't break resume anymore.

2) However I am still having problems with
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
although the machine resumes, I've managed to get the attached oops.

3) Subject : SATA breakage on resume
References : http://lkml.org/lkml/2007/3/7/233
Submitter : Thomas Gleixner <tglx@linutronix.de>
Soeren Sonnenburg <kernel@nn7.de>
Status : unknown

I am still seeing these messages after a suspend/resume cycle (though
all devices work even after multiple suspend/resume cycles)

ATA: abnormal status 0x80 on port 0x000140df
ata3.01: revalidation failed (errno=-2)
ata3: failed to recover some devices, retrying in 5 secs
ata1.00: configured for UDMA/33
ATA: abnormal status 0x7F on port 0x000140df
ATA: abnormal status 0x7F on port 0x000140df
ata3.01: configured for UDMA/133

So that's been a big step forward...
Soeren
--
For the one fact about the future of which we can be certain is that it
will be utterly fantastic. -- Arthur C. Clarke, 1962
CPU1 is down
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Back to C!
irq 9: nobody cared (try booting with the "irqpoll" option)
[<c0154444>] __report_bad_irq+0x24/0x90
[<c01546df>] note_interrupt+0x22f/0x260
[<c026952d>] acpi_irq+0xb/0x14
[<c0153905>] handle_IRQ_event+0x25/0x60
[<c0155300>] handle_level_irq+0xe0/0x110
[<c0106e8b>] do_IRQ+0x3b/0x80
[<c0119637>] smp_apic_timer_interrupt+0x57/0x90
[<c0104c73>] common_interrupt+0x23/0x28
[<c01400d8>] __kfifo_put+0x78/0x90
[<c0130d6d>] __do_softirq+0x6d/0xf0
[<c0130e27>] do_softirq+0x37/0x40
[<c013108a>] irq_exit+0x7a/0x90
[<c0119637>] smp_apic_timer_interrupt+0x57/0x90
[<c0142d30>] retrigger_next_event+0x0/0xb0
[<c0104d30>] apic_timer_interrupt+0x28/0x30
[<c0142d30>] retrigger_next_event+0x0/0xb0
[<c0140068>] __kfifo_put+0x8/0x90
[<c0130fe5>] on_each_cpu+0x35/0x60
[<c0143538>] clock_was_set+0x18/0x20
[<c0135cdc>] timekeeping_resume+0x7c/0xa0
[<c02aabe1>] __sysdev_resume+0x11/0x80
[<c02ab0c7>] sysdev_resume+0x47/0x80
[<c02b0b05>] device_power_up+0x5/0x10
[<c014f136>] suspend_enter+0x56/0x60
[<c014f25a>] enter_state+0x11a/0x1c0
[<c014f3bd>] state_store+0xbd/0xd0
[<c014f300>] state_store+0x0/0xd0
[<c01b52c9>] subsys_attr_store+0x29/0x40
[<c01b5432>] sysfs_write_file+0xb2/0x110
[<c0175a66>] vfs_write+0xa6/0x140
[<c01b5380>] sysfs_write_file+0x0/0x110
[<c0176131>] sys_write+0x41/0x70
[<c0104262>] sysenter_past_esp+0x5f/0x85
=======================
handlers:
[<c0269522>] (acpi_irq+0x0/0x14)
Disabling IRQ #9
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
\
 
 \ /
  Last update: 2007-04-07 00:47    [W:0.357 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site