Messages in this thread | | | Date | Fri, 27 Apr 2007 18:11:15 -0400 | From | Daniel Drake <> | Subject | Re: sky2 regression in 2.6.21: Asus P5B-E Plus ethernet adapter no more supported |
| |
Hi Stephen,
Stephen Hemminger wrote: > But the same hardware dies horribly on Gigabyte GA-965P motherboards. > Could you send me full lspci -vvx output. I'll re-enable it for Asus and add a block > for the Gigabyte boards. (sigh)
This was also reported by another user at https://bugs.gentoo.org/show_bug.cgi?id=176219
The following hardware on an Asus P5B Deluxe board worked fine with 2.6.20:
sky2 v1.10 addr 0xfeafc000 irq 17 Yukon-EC Ultra (0xb4) rev 2
02:00.0 0200: 11ab:4364 (rev 12) Subsystem: 1148:4340 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at feafc000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at d800 [size=256] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [e0] Express Legacy Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0 Link: Latency L0s <256ns, L1 unlimited Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x1 00: ab 11 64 43 07 00 10 00 12 00 00 02 08 00 00 00 10: 04 c0 af fe 00 00 00 00 01 d8 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 48 11 40 43 30: 00 00 ac fe 48 00 00 00 00 00 00 00 0a 01 00 00
I guess it may come as a side effect of your upcoming patch, but it would be nice if sky2 could printk() some basic info when it detects one of the controllers that it is going to ignore. Right now it is kind of mysterious why eth0 has disappeared in 2.6.21 for some users.
Thanks, Daniel - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |