lkml.org 
[lkml]   [2007]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 3/3] MMC: OMAP: Clean up omap set_ios and make MMC_POWER_ON work

Move divisor calculation into a separate function and
re-arrange the init order to make MMC_POWER_ON work.

Signed-off-by: Tony Lindgren <tony@atomide.com>

Index: linux-2.6.20/drivers/mmc/omap.c
===================================================================
--- linux-2.6.20.orig/drivers/mmc/omap.c 2007-04-24 15:22:25.000000000 -0400
+++ linux-2.6.20/drivers/mmc/omap.c 2007-04-24 15:22:28.000000000 -0400
@@ -937,33 +937,41 @@ static void mmc_omap_power(struct mmc_om
}
}

-static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+static int mmc_omap_calc_divisor(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct mmc_omap_host *host = mmc_priv(mmc);
+ int func_clk_rate = clk_get_rate(host->fclk);
int dsor;
- int realclock, i;
-
- realclock = ios->clock;

if (ios->clock == 0)
- dsor = 0;
- else {
- int func_clk_rate = clk_get_rate(host->fclk);
-
- dsor = func_clk_rate / realclock;
- if (dsor < 1)
- dsor = 1;
+ return 0;

- if (func_clk_rate / dsor > realclock)
- dsor++;
+ dsor = func_clk_rate / ios->clock;
+ if (dsor < 1)
+ dsor = 1;

- if (dsor > 250)
- dsor = 250;
+ if (func_clk_rate / dsor > ios->clock)
dsor++;

- if (ios->bus_width == MMC_BUS_WIDTH_4)
- dsor |= 1 << 15;
- }
+ if (dsor > 250)
+ dsor = 250;
+ dsor++;
+
+ if (ios->bus_width == MMC_BUS_WIDTH_4)
+ dsor |= 1 << 15;
+
+ return dsor;
+}
+
+static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct mmc_omap_host *host = mmc_priv(mmc);
+ int dsor;
+ int i;
+
+ dsor = mmc_omap_calc_divisor(mmc, ios);
+ host->bus_mode = ios->bus_mode;
+ host->hw_bus_mode = host->bus_mode;

switch (ios->power_mode) {
case MMC_POWER_OFF:
@@ -978,9 +986,6 @@ static void mmc_omap_set_ios(struct mmc_
break;
}

- host->bus_mode = ios->bus_mode;
- host->hw_bus_mode = host->bus_mode;
-
clk_enable(host->fclk);

/* On insanely high arm_per frequencies something sometimes
\
 
 \ /
  Last update: 2007-04-24 22:51    [W:0.076 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site