lkml.org 
[lkml]   [2007]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 5/9] Kconfig: use common Kconfig files for s390.
From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Disband drivers/s390/Kconfig, use the common Kconfig files. The s390
specific config options from drivers/s390/Kconfig are moved to the
respective common Kconfig files.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---

arch/s390/Kconfig | 49 +++------
drivers/block/Kconfig | 4
drivers/char/Kconfig | 2
drivers/crypto/Kconfig | 22 ++++
drivers/s390/Kconfig | 239 ---------------------------------------------
drivers/s390/block/Kconfig | 11 --
drivers/s390/char/Kconfig | 166 +++++++++++++++++++++++++++++++
drivers/s390/net/Kconfig | 8 -
include/asm-s390/param.h | 2
9 files changed, 217 insertions(+), 286 deletions(-)

diff -urpN linux-2.6/arch/s390/Kconfig linux-2.6-patched/arch/s390/Kconfig
--- linux-2.6/arch/s390/Kconfig 2007-04-23 15:51:21.000000000 +0200
+++ linux-2.6-patched/arch/s390/Kconfig 2007-04-23 15:53:10.000000000 +0200
@@ -4,27 +4,23 @@
#

config MMU
- bool
- default y
+ def_bool y

config ZONE_DMA
def_bool y
depends on 64BIT

config LOCKDEP_SUPPORT
- bool
- default y
+ def_bool y

config STACKTRACE_SUPPORT
- bool
- default y
+ def_bool y

config RWSEM_GENERIC_SPINLOCK
bool

config RWSEM_XCHGADD_ALGORITHM
- bool
- default y
+ def_bool y

config ARCH_HAS_ILOG2_U32
bool
@@ -35,8 +31,7 @@ config ARCH_HAS_ILOG2_U64
default n

config GENERIC_HWEIGHT
- bool
- default y
+ def_bool y

config GENERIC_TIME
def_bool y
@@ -55,8 +50,7 @@ config NO_DMA
mainmenu "Linux Kernel Configuration"

config S390
- bool
- default y
+ def_bool y

source "init/Kconfig"

@@ -280,6 +274,10 @@ config WARN_STACK_SIZE
config ARCH_POPULATES_NODE_MAP
def_bool y

+comment "Kernel preemption"
+
+source "kernel/Kconfig.preempt"
+
source "mm/Kconfig"

config HOLES_IN_ZONE
@@ -320,17 +318,6 @@ config QDIO_DEBUG

comment "Misc"

-config PREEMPT
- bool "Preemptible Kernel"
- help
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load.
-
- Say N if you are unsure.
-
config IPL
bool "Builtin IPL record support"
help
@@ -488,6 +475,8 @@ config APPLDATA_NET_SUM
This can also be compiled as a module, which will be called
appldata_net_sum.o.

+source kernel/Kconfig.hz
+
config NO_IDLE_HZ
bool "No HZ timer ticks in idle"
help
@@ -535,18 +524,12 @@ endmenu
source "net/Kconfig"

config PCMCIA
- bool
- default n
-
-source "drivers/base/Kconfig"
+ def_bool n

-source "drivers/connector/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/s390/Kconfig"
+config CCW
+ def_bool y

-source "drivers/net/Kconfig"
+source "drivers/Kconfig"

source "fs/Kconfig"

diff -urpN linux-2.6/drivers/block/Kconfig linux-2.6-patched/drivers/block/Kconfig
--- linux-2.6/drivers/block/Kconfig 2007-04-23 15:50:41.000000000 +0200
+++ linux-2.6-patched/drivers/block/Kconfig 2007-04-23 15:53:10.000000000 +0200
@@ -444,8 +444,6 @@ config CDROM_PKTCDVD_WCACHE
this option is dangerous unless the CD-RW media is known good, as we
don't do deferred write error handling yet.

-source "drivers/s390/block/Kconfig"
-
config ATA_OVER_ETH
tristate "ATA over Ethernet support"
depends on NET
@@ -453,6 +451,8 @@ config ATA_OVER_ETH
This driver provides Support for ATA over Ethernet block
devices like the Coraid EtherDrive (R) Storage Blade.

+source "drivers/s390/block/Kconfig"
+
endmenu

endif
diff -urpN linux-2.6/drivers/char/Kconfig linux-2.6-patched/drivers/char/Kconfig
--- linux-2.6/drivers/char/Kconfig 2007-04-23 15:53:10.000000000 +0200
+++ linux-2.6-patched/drivers/char/Kconfig 2007-04-23 15:53:10.000000000 +0200
@@ -1090,5 +1090,7 @@ config DEVPORT
depends on ISA || PCI
default y

+source "drivers/s390/char/Kconfig"
+
endmenu

diff -urpN linux-2.6/drivers/crypto/Kconfig linux-2.6-patched/drivers/crypto/Kconfig
--- linux-2.6/drivers/crypto/Kconfig 2007-04-23 15:50:42.000000000 +0200
+++ linux-2.6-patched/drivers/crypto/Kconfig 2007-04-23 15:53:10.000000000 +0200
@@ -66,4 +66,26 @@ config CRYPTO_DEV_GEODE
To compile this driver as a module, choose M here: the module
will be called geode-aes.

+config ZCRYPT
+ tristate "Support for PCI-attached cryptographic adapters"
+ depends on S390
+ select ZCRYPT_MONOLITHIC if ZCRYPT="y"
+ default "m"
+ help
+ Select this option if you want to use a PCI-attached cryptographic
+ adapter like:
+ + PCI Cryptographic Accelerator (PCICA)
+ + PCI Cryptographic Coprocessor (PCICC)
+ + PCI-X Cryptographic Coprocessor (PCIXCC)
+ + Crypto Express2 Coprocessor (CEX2C)
+ + Crypto Express2 Accelerator (CEX2A)
+
+config ZCRYPT_MONOLITHIC
+ bool "Monolithic zcrypt module"
+ depends on ZCRYPT="m"
+ help
+ Select this option if you want to have a single module z90crypt.ko
+ that contains all parts of the crypto device driver (ap bus,
+ request router and all the card drivers).
+
endmenu
diff -urpN linux-2.6/drivers/s390/block/Kconfig linux-2.6-patched/drivers/s390/block/Kconfig
--- linux-2.6/drivers/s390/block/Kconfig 2007-02-04 19:44:54.000000000 +0100
+++ linux-2.6-patched/drivers/s390/block/Kconfig 2007-04-23 15:53:10.000000000 +0200
@@ -1,11 +1,9 @@
-if S390 && BLOCK
-
comment "S/390 block device drivers"
- depends on S390
+ depends on S390 && BLOCK

config BLK_DEV_XPRAM
tristate "XPRAM disk support"
- depends on S390
+ depends on S390 && BLOCK
help
Select this option if you want to use your expanded storage on S/390
or zSeries as a disk. This is useful as a _fast_ swap device if you
@@ -15,12 +13,13 @@ config BLK_DEV_XPRAM

config DCSSBLK
tristate "DCSSBLK support"
+ depends on S390 && BLOCK
help
Support for dcss block device

config DASD
tristate "Support for DASD devices"
- depends on CCW
+ depends on CCW && BLOCK
help
Enable this option if you want to access DASDs directly utilizing
S/390s channel subsystem commands. This is necessary for running
@@ -62,5 +61,3 @@ config DASD_EER
This driver provides a character device interface to the
DASD extended error reporting. This is only needed if you want to
use applications written for the EER facility.
-
-endif
diff -urpN linux-2.6/drivers/s390/char/Kconfig linux-2.6-patched/drivers/s390/char/Kconfig
--- linux-2.6/drivers/s390/char/Kconfig 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6-patched/drivers/s390/char/Kconfig 2007-04-23 15:53:10.000000000 +0200
@@ -0,0 +1,166 @@
+comment "S/390 character device drivers"
+ depends on S390
+
+config TN3270
+ tristate "Support for locally attached 3270 terminals"
+ depends on CCW
+ help
+ Include support for IBM 3270 terminals.
+
+config TN3270_TTY
+ tristate "Support for tty input/output on 3270 terminals"
+ depends on TN3270
+ help
+ Include support for using an IBM 3270 terminal as a Linux tty.
+
+config TN3270_FS
+ tristate "Support for fullscreen applications on 3270 terminals"
+ depends on TN3270
+ help
+ Include support for fullscreen applications on an IBM 3270 terminal.
+
+config TN3270_CONSOLE
+ bool "Support for console on 3270 terminal"
+ depends on TN3270=y && TN3270_TTY=y
+ help
+ Include support for using an IBM 3270 terminal as a Linux system
+ console. Available only if 3270 support is compiled in statically.
+
+config TN3215
+ bool "Support for 3215 line mode terminal"
+ depends on CCW
+ help
+ Include support for IBM 3215 line-mode terminals.
+
+config TN3215_CONSOLE
+ bool "Support for console on 3215 line mode terminal"
+ depends on TN3215
+ help
+ Include support for using an IBM 3215 line-mode terminal as a
+ Linux system console.
+
+config CCW_CONSOLE
+ bool
+ depends on TN3215_CONSOLE || TN3270_CONSOLE
+ default y
+
+config SCLP
+ bool "Support for SCLP"
+ depends on S390
+ help
+ Include support for the SCLP interface to the service element.
+
+config SCLP_TTY
+ bool "Support for SCLP line mode terminal"
+ depends on SCLP
+ help
+ Include support for IBM SCLP line-mode terminals.
+
+config SCLP_CONSOLE
+ bool "Support for console on SCLP line mode terminal"
+ depends on SCLP_TTY
+ help
+ Include support for using an IBM HWC line-mode terminal as the Linux
+ system console.
+
+config SCLP_VT220_TTY
+ bool "Support for SCLP VT220-compatible terminal"
+ depends on SCLP
+ help
+ Include support for an IBM SCLP VT220-compatible terminal.
+
+config SCLP_VT220_CONSOLE
+ bool "Support for console on SCLP VT220-compatible terminal"
+ depends on SCLP_VT220_TTY
+ help
+ Include support for using an IBM SCLP VT220-compatible terminal as a
+ Linux system console.
+
+config SCLP_CPI
+ tristate "Control-Program Identification"
+ depends on SCLP
+ help
+ This option enables the hardware console interface for system
+ identification. This is commonly used for workload management and
+ gives you a nice name for the system on the service element.
+ Please select this option as a module since built-in operation is
+ completely untested.
+ You should only select this option if you know what you are doing,
+ need this feature and intend to run your kernel in LPAR.
+
+config S390_TAPE
+ tristate "S/390 tape device support"
+ depends on CCW
+ help
+ Select this option if you want to access channel-attached tape
+ devices on IBM S/390 or zSeries.
+ If you select this option you will also want to select at
+ least one of the tape interface options and one of the tape
+ hardware options in order to access a tape device.
+ This option is also available as a module. The module will be
+ called tape390 and include all selected interfaces and
+ hardware drivers.
+
+comment "S/390 tape interface support"
+ depends on S390_TAPE
+
+config S390_TAPE_BLOCK
+ bool "Support for tape block devices"
+ depends on S390_TAPE
+ help
+ Select this option if you want to access your channel-attached tape
+ devices using the block device interface. This interface is similar
+ to CD-ROM devices on other platforms. The tapes can only be
+ accessed read-only when using this interface. Have a look at
+ <file:Documentation/s390/TAPE> for further information about creating
+ volumes for and using this interface. It is safe to say "Y" here.
+
+comment "S/390 tape hardware support"
+ depends on S390_TAPE
+
+config S390_TAPE_34XX
+ tristate "Support for 3480/3490 tape hardware"
+ depends on S390_TAPE
+ help
+ Select this option if you want to access IBM 3480/3490 magnetic
+ tape subsystems and 100% compatibles.
+ It is safe to say "Y" here.
+
+config S390_TAPE_3590
+ tristate "Support for 3590 tape hardware"
+ depends on S390_TAPE
+ help
+ Select this option if you want to access IBM 3590 magnetic
+ tape subsystems and 100% compatibles.
+ It is safe to say "Y" here.
+
+config VMLOGRDR
+ tristate "Support for the z/VM recording system services (VM only)"
+ depends on IUCV
+ help
+ Select this option if you want to be able to receive records collected
+ by the z/VM recording system services, eg. from *LOGREC, *ACCOUNT or
+ *SYMPTOM.
+ This driver depends on the IUCV support driver.
+
+config VMCP
+ tristate "Support for the z/VM CP interface (VM only)"
+ depends on S390
+ help
+ Select this option if you want to be able to interact with the control
+ program on z/VM
+
+
+config MONREADER
+ tristate "API for reading z/VM monitor service records"
+ depends on IUCV
+ help
+ Character device driver for reading z/VM monitor service records
+
+config MONWRITER
+ tristate "API for writing z/VM monitor service records"
+ depends on S390
+ default "m"
+ help
+ Character device driver for writing z/VM monitor service records
+
diff -urpN linux-2.6/drivers/s390/Kconfig linux-2.6-patched/drivers/s390/Kconfig
--- linux-2.6/drivers/s390/Kconfig 2007-04-23 15:50:49.000000000 +0200
+++ linux-2.6-patched/drivers/s390/Kconfig 1970-01-01 01:00:00.000000000 +0100
@@ -1,239 +0,0 @@
-config CCW
- bool
- default y
-
-source "drivers/block/Kconfig"
-
-source "drivers/md/Kconfig"
-
-
-menu "Character device drivers"
-
-config UNIX98_PTYS
- bool "Unix98 PTY support"
- ---help---
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx for
- masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
- has a number of problems. The GNU C library glibc 2.1 and later,
- however, supports the Unix98 naming standard: in order to acquire a
- pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
- terminal is then made available to the process and the pseudo
- terminal slave can be accessed as /dev/pts/<number>. What was
- traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
- The entries in /dev/pts/ are created on the fly by a virtual
- file system; therefore, if you say Y here you should say Y to
- "/dev/pts file system for Unix98 PTYs" as well.
-
- If you want to say Y here, you need to have the C library glibc 2.1
- or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
- Read the instructions in <file:Documentation/Changes> pertaining to
- pseudo terminals. It's safe to say N.
-
-config UNIX98_PTY_COUNT
- int "Maximum number of Unix98 PTYs in use (0-2048)"
- depends on UNIX98_PTYS
- default "256"
- help
- The maximum number of Unix98 PTYs that can be used at any one time.
- The default is 256, and should be enough for desktop systems. Server
- machines which support incoming telnet/rlogin/ssh connections and/or
- serve several X terminals may want to increase this: every incoming
- connection and every xterm uses up one PTY.
-
- When not in use, each additional set of 256 PTYs occupy
- approximately 8 KB of kernel memory on 32-bit architectures.
-
-config HANGCHECK_TIMER
- tristate "Hangcheck timer"
- help
- The hangcheck-timer module detects when the system has gone
- out to lunch past a certain margin. It can reboot the system
- or merely print a warning.
-
-source "drivers/char/watchdog/Kconfig"
-
-comment "S/390 character device drivers"
-
-config TN3270
- tristate "Support for locally attached 3270 terminals"
- help
- Include support for IBM 3270 terminals.
-
-config TN3270_TTY
- tristate "Support for tty input/output on 3270 terminals"
- depends on TN3270
- help
- Include support for using an IBM 3270 terminal as a Linux tty.
-
-config TN3270_FS
- tristate "Support for fullscreen applications on 3270 terminals"
- depends on TN3270
- help
- Include support for fullscreen applications on an IBM 3270 terminal.
-
-config TN3270_CONSOLE
- bool "Support for console on 3270 terminal"
- depends on TN3270=y && TN3270_TTY=y
- help
- Include support for using an IBM 3270 terminal as a Linux system
- console. Available only if 3270 support is compiled in statically.
-
-config TN3215
- bool "Support for 3215 line mode terminal"
- help
- Include support for IBM 3215 line-mode terminals.
-
-config TN3215_CONSOLE
- bool "Support for console on 3215 line mode terminal"
- depends on TN3215
- help
- Include support for using an IBM 3215 line-mode terminal as a
- Linux system console.
-
-config CCW_CONSOLE
- bool
- depends on TN3215_CONSOLE || TN3270_CONSOLE
- default y
-
-config SCLP_TTY
- bool "Support for SCLP line mode terminal"
- help
- Include support for IBM SCLP line-mode terminals.
-
-config SCLP_CONSOLE
- bool "Support for console on SCLP line mode terminal"
- depends on SCLP_TTY
- help
- Include support for using an IBM HWC line-mode terminal as the Linux
- system console.
-
-config SCLP_VT220_TTY
- bool "Support for SCLP VT220-compatible terminal"
- help
- Include support for an IBM SCLP VT220-compatible terminal.
-
-config SCLP_VT220_CONSOLE
- bool "Support for console on SCLP VT220-compatible terminal"
- depends on SCLP_VT220_TTY
- help
- Include support for using an IBM SCLP VT220-compatible terminal as a
- Linux system console.
-
-config SCLP_CPI
- tristate "Control-Program Identification"
- help
- This option enables the hardware console interface for system
- identification. This is commonly used for workload management and
- gives you a nice name for the system on the service element.
- Please select this option as a module since built-in operation is
- completely untested.
- You should only select this option if you know what you are doing,
- need this feature and intend to run your kernel in LPAR.
-
-config S390_TAPE
- tristate "S/390 tape device support"
- help
- Select this option if you want to access channel-attached tape
- devices on IBM S/390 or zSeries.
- If you select this option you will also want to select at
- least one of the tape interface options and one of the tape
- hardware options in order to access a tape device.
- This option is also available as a module. The module will be
- called tape390 and include all selected interfaces and
- hardware drivers.
-
-comment "S/390 tape interface support"
- depends on S390_TAPE
-
-config S390_TAPE_BLOCK
- bool "Support for tape block devices"
- depends on S390_TAPE
- help
- Select this option if you want to access your channel-attached tape
- devices using the block device interface. This interface is similar
- to CD-ROM devices on other platforms. The tapes can only be
- accessed read-only when using this interface. Have a look at
- <file:Documentation/s390/TAPE> for further information about creating
- volumes for and using this interface. It is safe to say "Y" here.
-
-comment "S/390 tape hardware support"
- depends on S390_TAPE
-
-config S390_TAPE_34XX
- tristate "Support for 3480/3490 tape hardware"
- depends on S390_TAPE
- help
- Select this option if you want to access IBM 3480/3490 magnetic
- tape subsystems and 100% compatibles.
- It is safe to say "Y" here.
-
-config S390_TAPE_3590
- tristate "Support for 3590 tape hardware"
- depends on S390_TAPE
- help
- Select this option if you want to access IBM 3590 magnetic
- tape subsystems and 100% compatibles.
- It is safe to say "Y" here.
-
-config VMLOGRDR
- tristate "Support for the z/VM recording system services (VM only)"
- depends on IUCV
- help
- Select this option if you want to be able to receive records collected
- by the z/VM recording system services, eg. from *LOGREC, *ACCOUNT or
- *SYMPTOM.
- This driver depends on the IUCV support driver.
-
-config VMCP
- tristate "Support for the z/VM CP interface (VM only)"
- help
- Select this option if you want to be able to interact with the control
- program on z/VM
-
-
-config MONREADER
- tristate "API for reading z/VM monitor service records"
- depends on IUCV
- help
- Character device driver for reading z/VM monitor service records
-
-config MONWRITER
- tristate "API for writing z/VM monitor service records"
- default "m"
- help
- Character device driver for writing z/VM monitor service records
-
-endmenu
-
-menu "Cryptographic devices"
-
-config ZCRYPT
- tristate "Support for PCI-attached cryptographic adapters"
- select ZCRYPT_MONOLITHIC if ZCRYPT="y"
- default "m"
- help
- Select this option if you want to use a PCI-attached cryptographic
- adapter like:
- + PCI Cryptographic Accelerator (PCICA)
- + PCI Cryptographic Coprocessor (PCICC)
- + PCI-X Cryptographic Coprocessor (PCIXCC)
- + Crypto Express2 Coprocessor (CEX2C)
- + Crypto Express2 Accelerator (CEX2A)
-
-config ZCRYPT_MONOLITHIC
- bool "Monolithic zcrypt module"
- depends on ZCRYPT="m"
- help
- Select this option if you want to have a single module z90crypt.ko
- that contains all parts of the crypto device driver (ap bus,
- request router and all the card drivers).
-
-endmenu
diff -urpN linux-2.6/drivers/s390/net/Kconfig linux-2.6-patched/drivers/s390/net/Kconfig
--- linux-2.6/drivers/s390/net/Kconfig 2007-04-23 15:50:49.000000000 +0200
+++ linux-2.6-patched/drivers/s390/net/Kconfig 2007-04-23 15:53:10.000000000 +0200
@@ -3,7 +3,7 @@ menu "S/390 network device drivers"

config LCS
tristate "Lan Channel Station Interface"
- depends on NETDEVICES && (NET_ETHERNET || TR || FDDI)
+ depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI)
help
Select this option if you want to use LCS networking on IBM S/390
or zSeries. This device driver supports Token Ring (IEEE 802.5),
@@ -13,7 +13,7 @@ config LCS

config CTC
tristate "CTC device support"
- depends on NETDEVICES
+ depends on CCW && NETDEVICES
help
Select this option if you want to use channel-to-channel networking
on IBM S/390 or zSeries. This device driver supports real CTC
@@ -42,7 +42,7 @@ config SMSGIUCV

config CLAW
tristate "CLAW device support"
- depends on NETDEVICES
+ depends on CCW && NETDEVICES
help
This driver supports channel attached CLAW devices.
CLAW is Common Link Access for Workstation. Common devices
@@ -52,7 +52,7 @@ config CLAW

config QETH
tristate "Gigabit Ethernet device support"
- depends on NETDEVICES && IP_MULTICAST && QDIO
+ depends on CCW && NETDEVICES && IP_MULTICAST && QDIO
help
This driver supports the IBM S/390 and zSeries OSA Express adapters
in QDIO mode (all media types), HiperSockets interfaces and VM GuestLAN
diff -urpN linux-2.6/include/asm-s390/param.h linux-2.6-patched/include/asm-s390/param.h
--- linux-2.6/include/asm-s390/param.h 2007-02-04 19:44:54.000000000 +0100
+++ linux-2.6-patched/include/asm-s390/param.h 2007-04-23 15:53:10.000000000 +0200
@@ -10,7 +10,7 @@
#define _ASMS390_PARAM_H

#ifdef __KERNEL__
-# define HZ 100 /* Internal kernel timer frequency */
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2007-04-23 16:17    [W:0.034 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site