lkml.org 
[lkml]   [2007]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Regression between 2.6.20 and 2.6.21-rc1: NCQ problem with ahci and Hitachi drive
Tejun Heo a écrit :

Hi,
> No, your drive isn't blacklisted yet. NCQ is still being enabled.
>
>
Sorry, I wasn't very clear: The NCQ blacklist patch is not in
the 2.6.21-rc tree, just in -mm. I tried a 2.6.21-rc2-mm1 and
the drive is blacklisted. The logs I pasted were from 2.6.20 and
2.6.21-rc1.
>> [ 16.091804] ata1.00: configured for UDMA/100
>> [ 18.151756] SCSI device sda: write cache: enabled, read cache:
>> enabled, doesn't support DPO or FUA
>>
> [--snip--]
>
>> [ 18.151856] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>> [ 18.151911] sda: Write Protect is off
>> [ 18.151977] SCSI device sda: write cache: enabled, read cache:
>> enabled, doesn't support DPO or FUA
>> [....]
>> [ 48.143940] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2
>> frozen
>> [ 48.143999] ata1.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0
>> cdb 0x0 data 4096 in
>> [ 48.144000] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
>> 0x4 (timeout)
>>
>
> It looks like IRQ isn't getting through. Does giving "acpi=off" kernel
> parameter make any difference?
>
>

Yes It works with acpi=off (2.6.21-rc1):
Please notice that IRQ is changed from 19 with ACPI to 11 without.

[ 24.226291] SCSI subsystem initialized
[ 24.230178] libata version 2.10 loaded.
[ 24.231315] ahci 0000:00:1f.2: version 2.0
[ 25.231137] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 25.231144] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5
Gbps 0x5 impl SATA mode
[ 25.231202] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
[ 25.231341] ata1: SATA max UDMA/133 cmd 0xf880ed00 ctl 0x00000000
bmdma 0x00000000 irq 11
[ 25.231468] ata2: SATA max UDMA/133 cmd 0xf880ed80 ctl 0x00000000
bmdma 0x00000000 irq 11
[ 25.231596] ata3: SATA max UDMA/133 cmd 0xf880ee00 ctl 0x00000000
bmdma 0x00000000 irq 11
[ 25.231722] ata4: SATA max UDMA/133 cmd 0xf880ee80 ctl 0x00000000
bmdma 0x00000000 irq 11
[ 25.231783] scsi0 : ahci
[ 25.688849] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 25.689915] ata1.00: ATA-7: HTS541010G9SA00, MBZOC60D, max UDMA/100
[ 25.689964] ata1.00: 195371568 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 25.691271] ata1.00: configured for UDMA/100
[ 25.691321] scsi1 : ahci
[ 25.993653] ata2: SATA link down (SStatus 0 SControl 0)
[ 25.993706] scsi2 : ahci
[ 26.296471] ata3: SATA link down (SStatus 0 SControl 300)
[ 26.296524] scsi3 : ahci
[ 26.599288] ata4: SATA link down (SStatus 0 SControl 0)
[ 26.599423] scsi 0:0:0:0: Direct-Access ATA HTS541010G9SA00
MBZO PQ: 0 ANSI: 5
[....]
[ 27.741608] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 27.741706] sda: Write Protect is off
[ 27.741753] sda: Mode Sense: 00 3a 00 00
[ 27.741921] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 27.742037] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 27.742091] sda: Write Protect is off
[ 27.742171] sda: Mode Sense: 00 3a 00 00
[ 27.742182] SCSI device sda: write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 27.742238] sda: sda1 sda2 < sda5 sda6 > sda3
[ 28.204850] sd 0:0:0:0: Attached scsi disk sda
[ 28.207809] sd 0:0:0:0: Attached scsi generic sg0 type 0


--
Mathieu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-03-05 22:31    [W:0.055 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site