lkml.org 
[lkml]   [2007]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [ANNOUNCE] RSDL completely fair starvation free interactive cpu scheduler
Date
On Monday 05 March 2007 09:19, Simon Arlott wrote:
> On 04/03/07 21:49, Con Kolivas wrote:
> > On Monday 05 March 2007 07:35, Al Boldi wrote:
> >> Con Kolivas wrote:
> >>> This means that if you heavily load up your machine without the use of
> >>> 'nice' then your interactive tasks _will_ slow down proportionately to
> >>> the amount of cpu you use. So doing make -j4 for example will make any
> >>> other task started in taht presence run precisely 1/5th speed, but they
> >>> will still be responsive, have low latency (and audio shouldn't skip
> >>> for example).
> >>
> >> That's just what it did, but when you "nice make -j4", things (gears)
> >> start to stutter. Is that due to the staircase?
> >
> > gears isn't an interactive task. Apart from using it as a background load
> > to check for starvation because it loads up the cpu fully (which a gpu
> > intensive but otherwise simple app like this should _not_ do) graphics
> > card drivers and interrupts and so on, I wouldn't put much credence on
> > gears as anything else. However I suspect that gears will still get a
> > fair share of the cpu on RSDL which almost never happens on any other
> > scheduler.
>
> If I run glxgears, thunderbird/firefox become really slow to
> respond/display and cpu usage isn't even at 100%. I had thunderbird lagging
> on keyboard character repeat earlier but can't reproduce that now even with
> glxgears - however firefox lags really badly on keyboard input with
> glxgears running.

Hi Simon

You're hitting a nasty udev bug here that is unrelated to the cpu scheduler
and almost certainly responsible for your bad behaviour.

[ 39.314953] =================================
[ 39.315068] [ INFO: inconsistent lock state ]
[ 39.315120] 2.6.21-rc2-git #161
[ 39.315167] ---------------------------------
[ 39.315217] inconsistent {softirq-on-R} -> {in-softirq-W} usage.
[ 39.315271] udevd/1424 [HC0[0]:SC1[2]:HE1:SE0] takes:
[ 39.315323] (&ndev->lock){-+-?}, at: [<b04a57c4>]
ipv6_add_addr+0x164/0x1e0
[ 39.315525] {softirq-on-R} state was registered at:
[ 39.315576] [<b013f8d2>] __lock_acquire+0x622/0xbb0
[ 39.315731] [<b01402e2>] lock_acquire+0x62/0x80
[ 39.315883] [<b050fc55>] _read_lock+0x35/0x50
[ 39.316043] [<b050c1e0>] sctp_v6_copy_addrlist+0x30/0xc0
[ 39.316197] [<b04f9cd2>] sctp_get_local_addr_list+0x32/0x60
[ 39.316358] [<b06de1f0>] sctp_init+0x2c0/0x550
[ 39.316516] [<b06bcc55>] do_initcalls+0x35/0x120
[ 39.316687] [<b06bcd5c>] do_basic_setup+0x1c/0x30
[ 39.316840] [<b06bcdbf>] init+0x3f/0x90
[ 39.316994] [<b0104d87>] kernel_thread_helper+0x7/0x10
[ 39.317150] [<ffffffff>] 0xffffffff
[ 39.317300] irq event stamp: 1976
[ 39.317348] hardirqs last enabled at (1976): [<b014087e>]
debug_check_no_locks_freed+0xbe/0xd0
[ 39.317481] hardirqs last disabled at (1975): [<b01407ea>]
debug_check_no_locks_freed+0x2a/0xd0
[ 39.317618] softirqs last enabled at (1808): [<b0435557>]
release_sock+0x57/0xb0
[ 39.317751] softirqs last disabled at (1853): [<b0125277>]
do_softirq+0x47/0x50
[ 39.317884]
[ 39.317885] other info that might help us debug this:
[ 39.317978] 3 locks held by udevd/1424:
[ 39.318026] #0: (&mm->mmap_sem){----}, at: [<b0116ae6>]
do_page_fault+0xb6/0x5a0
[ 39.318263] #1: (&npinfo->poll_lock){-+..}, at: [<b043cf28>]
net_rx_action+0x158/0x1a0
[ 39.318500] #2: (&tp->rx_lock){-+..}, at: [<b034ef7e>]
rtl8139_poll+0x3e/0x120
[ 39.318742]
[ 39.318743] stack backtrace:
[ 39.318833] [<b0104f4a>] show_trace_log_lvl+0x1a/0x30
[ 39.318924] [<b0104f72>] show_trace+0x12/0x20
[ 39.319009] [<b0105086>] dump_stack+0x16/0x20
[ 39.319094] [<b013e4d1>] print_usage_bug+0x151/0x160
[ 39.319180] [<b013e9a3>] mark_lock+0x4c3/0x580
[ 39.319265] [<b013f8b0>] __lock_acquire+0x600/0xbb0
[ 39.319354] [<b01402e2>] lock_acquire+0x62/0x80
[ 39.319439] [<b050fff5>] _write_lock+0x35/0x50
[ 39.319526] [<b04a57c4>] ipv6_add_addr+0x164/0x1e0
[ 39.319612] [<b04a76a2>] addrconf_prefix_rcv+0x2b2/0x560
[ 39.319707] [<b04b39b1>] ndisc_router_discovery+0x431/0x600
[ 39.319798] [<b04b4552>] ndisc_rcv+0x92/0xc0
[ 39.319883] [<b04b98b0>] icmpv6_rcv+0x2b0/0x2d0
[ 39.319971] [<b04a4975>] ip6_input+0x1a5/0x3c0
[ 39.320057] [<b04a4f3a>] ip6_mc_input+0x3a/0x60
[ 39.320145] [<b04a45ab>] ipv6_rcv+0x15b/0x380
[ 39.320231] [<b043cc31>] netif_receive_skb+0x271/0x2f0
[ 39.320318] [<b034ebb2>] rtl8139_rx+0x142/0x340
[ 39.320405] [<b034ef99>] rtl8139_poll+0x59/0x120
[ 39.320494] [<b043ce59>] net_rx_action+0x89/0x1a0
[ 39.320580] [<b01251d2>] __do_softirq+0x52/0xb0
[ 39.320666] [<b0125277>] do_softirq+0x47/0x50
[ 39.320754] [<b0125335>] irq_exit+0x75/0x80
[ 39.320843] [<b0106931>] do_IRQ+0x41/0x80
[ 39.320929] [<b0104be2>] common_interrupt+0x2e/0x34
[ 39.321016] [<b0510634>] error_code+0x74/0x7c
[ 39.321103] =======================

Also this patch was actually for 2.6.20 and you seem to have applied it to
2.6.21-rc2. I haven't even checked that it cleanly applies to that kernel.

--
-ck
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-03-04 23:31    [W:1.040 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site