lkml.org 
[lkml]   [2007]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectWrong IDE cable detection in libata [Re: 2.6.21-rc4-mm1]
On Mon, 19 Mar 2007 20:56:23 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:

>
> Temporarily at
>
> http://userweb.kernel.org/~akpm/2.6.21-rc4-mm1/
>

Libata seems to misdetect my cable.
I have double-checked and the cable is 80 pin...

ata1 is PATA ICH5 bus 1 with DVD-RW + ZIP and 40 pin cable
ata2 is PATA ICH5 bus 2 with extra HD + DVD and 80 pin cable
ata3 is real SATA ICH5 with boot HD

(mm, I chaged bios settings to get the box booting from the SATA disk)

werewolf:~# lsscsi
[0:0:0:0] cd/dvd HL-DT-ST DVDRAM GSA-H10N JL12 /dev/.tmp-11-0
[0:0:1:0] disk IOMEGA ZIP 250 51.G /dev/sda
[1:0:0:0] disk ATA ST3120022A 3.06 /dev/sdb
[1:0:1:0] cd/dvd TOSHIBA DVD-ROM SD-M1712 1004 /dev/sr1
[2:0:0:0] disk ATA ST3200822AS 3.01 /dev/sdc

ata_piix 0000:00:1f.1: version 2.10ac1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
scsi0 : ata_piix
ata1.00: ATAPI, max UDMA/33
ata1.01: ATAPI, max MWDMA0, CDB intr
ata1.00: configured for UDMA/33
ata1.01: configured for PIO3
scsi1 : ata_piix
ata2.00: ATA-6: ST3120022A, 3.06, max UDMA/100
ata2.00: 234441648 sectors, multi 16: LBA48
ata2.01: ATAPI, max UDMA/33
ata2.00: limited to UDMA/33 due to 40-wire cable <=======================
ata2.00: configured for UDMA/33
ata2.01: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL12 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
scsi 0:0:1:0: Direct-Access IOMEGA ZIP 250 51.G PQ: 0 ANSI: 5
sd 0:0:1:0: [sda] Attached SCSI removable disk
scsi 1:0:0:0: Direct-Access ATA ST3120022A 3.06 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
scsi 1:0:1:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1

Any ideas ?

--
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2007.1 (Cooker) for i586
Linux 2.6.20-jam05 (gcc 4.1.2 20070302 (prerelease) (4.1.2-1mdv2007.1)) #1 SMP PREEMPT
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-03-26 02:27    [W:0.333 / U:1.396 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site