lkml.org 
[lkml]   [2007]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: 2.6.20*: PATA DMA timeout, hangs (2)
Date

Hi,

Could you check if this is the same problem as this one:

http://bugzilla.kernel.org/show_bug.cgi?id=8169

Thanks,
Bart

On Monday 12 March 2007, Frank van Maarseveen wrote:
> On Mon, Mar 12, 2007 at 09:54:47AM +0100, Frank van Maarseveen wrote:
> >
> > 2.6.19 is ok, 2.6.20.[12] hangs from the moment DMA is turned on (hdparm
> > -d 1 /dev/hda):
> >
> > hda: dma_timer_expiry: dma status == 0x20
> > hda: DMA timeout retry
> > hda: timeout waiting for DMA
> > hda: status error: status=0x58 {
> > DriveReady
> > SeekComplete
> > DataRequest
> > }
>
> I have a totally different PATA based system (P4 HT) with similar symptoms
> except that it seem to recover by switching DMA off during boot after
> 5 errors:
>
> hda: dma_timer_expiry: dma status == 0x20
> hda: DMA timeout retry
> hda: timeout waiting for DMA
> hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> ide: failed opcode was: unknown
> hda: drive not ready for command
> hda: dma_timer_expiry: dma status == 0x20
> hda: DMA timeout retry
> hda: timeout waiting for DMA
> hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> ide: failed opcode was: unknown
> hda: drive not ready for command
> hda: dma_timer_expiry: dma status == 0x20
> hda: DMA timeout retry
> hda: timeout waiting for DMA
> hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> ide: failed opcode was: unknown
> hda: drive not ready for command
> hda: dma_timer_expiry: dma status == 0x20
> hda: DMA timeout retry
> hda: timeout waiting for DMA
> hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> ide: failed opcode was: unknown
> hda: drive not ready for command
> hda: dma_timer_expiry: dma status == 0x20
> hda: DMA timeout retry
> hda: timeout waiting for DMA
> hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> ide: failed opcode was: unknown
> hda: drive not ready for command
>
> So in this case it doesn't hang but is not really usable either.
>
> lspci:
> 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
> 00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
> 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
> 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
> 01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
> 02:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
>
> This system has SATA but there's only one PATA disk
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-03-12 13:17    [W:0.084 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site