lkml.org 
[lkml]   [2007]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectIs the clockevent resolution fine-grained enough?
Date
From

It would appear the new clockevent API has a one-nanosecond resolution.
It certainly looks sufficiently fine-grained, but I'm afraid it's too
coarse for some applications.

In our application, we need periodic clock interrupts at about 100 kHz.
If the (programmable) frequency must be rounded to the nearest
nanosecond, we have a cumulative error of

100,000 * 0.5 ns/s = 50 µs/s

We need to maintain the cumulative error within, say, 1 ms/day, or
11 ns/s. (The error is not measured against real time, but between
different parts of our hardware that are run off of the same clock.)

For our needs, we have built our own "clockevent" system that has a
nominal one-femtosecond precision. The nanosecond resolution would be
sufficient if there was a way to "nudge" the next interrupt by a
nanosecond from the interrupt handler.


Marko

--
Marko Rauhamaa mailto:marko@pacujo.net http://pacujo.net/marko/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-03-02 03:59    [W:0.048 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site