lkml.org 
[lkml]   [2007]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RFC] [PATCH] To list all active probes in the system---Take-2
Andrew Morton wrote:
> On Wed, 07 Feb 2007 10:55:23 +0530
> Srinivasa Ds <srinivasa@in.ibm.com> wrote:
>
>> --- linux-2.6.20.orig/fs/debugfs/inode.c
>> +++ linux-2.6.20/fs/debugfs/inode.c
>> @@ -25,6 +25,7 @@
>>
>> if (retval)
>> subsystem_unregister(&debug_subsys);
>> + debugfs_kprobe_init();
>> return retval;
>> }
>
> eww. Didn't it feel bad when you did that?
>
>
> As this module has a dependency upon debugfs, I'd have thought the
> approproate way of expressing that would be to run debugfs_kprobe_init()
> at a lower initcall priority than debugfs_init()
>
>> +
>> + if (dir == NULL)
>> + return;
>> + debugfs_create_file("list", 0444, dir , 0 , &proc_kprobes_operations);
>> +}
>> +
>> __initcall(init_kprobes);
>
> debugfs_init() already runs at core_initcall level, presumably so that
> debugfs clients can use plain old module_init().
>
>> +static inline void debugfs_kprobe_init(void)
>> +{
>> +}
>
> In which case we don't need this.

Updating the patch according to Andrew's comment.

This patch lists all active probes in the system by scanning through
kprobe_table[]. It takes care of aggregate handlers and prints the type
of the probe.
Letter "k" for kprobes, "j" for jprobes, "r" for kretprobes. It also
lists address of the instruction,its symbolic name(function name +
offset) and the module name. One can access this file through
/sys/kernel/debug/kprobes/list.

Output looks like this
=====================
llm40:~/a # cat /sys/kernel/debug/kprobes/list
c0169ae3 r sys_read+0x0
c0169ae3 k sys_read+0x0
c01694c8 k vfs_write+0x0
c0167d20 r sys_open+0x0
f8e658a6 k reiserfs_delete_inode+0x0 reiserfs
c0120f4a k do_fork+0x0
c0120f4a j do_fork+0x0
c0169b4a r sys_write+0x0
c0169b4a k sys_write+0x0
c0169622 r vfs_read+0x0
=================================

Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com>


kprobes.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 104 insertions(+)
Index: linux-2.6.20/kernel/kprobes.c
===================================================================
--- linux-2.6.20.orig/kernel/kprobes.c
+++ linux-2.6.20/kernel/kprobes.c
@@ -39,6 +39,8 @@
#include <linux/moduleloader.h>
#include <linux/kallsyms.h>
#include <linux/freezer.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
#include <asm-generic/sections.h>
#include <asm/cacheflush.h>
#include <asm/errno.h>
@@ -815,6 +817,108 @@ static int __init init_kprobes(void)
return err;
}

+#ifdef CONFIG_DEBUG_FS
+static void __kprobes report_probe(struct seq_file *pi, struct kprobe *p,
+ const char *sym, int offset,char *modname)
+{
+ char *kprobe_type;
+
+ if (p->pre_handler == pre_handler_kretprobe)
+ kprobe_type = "r";
+ else if (p->pre_handler == setjmp_pre_handler)
+ kprobe_type = "j";
+ else
+ kprobe_type = "k";
+ if (sym)
+ seq_printf(pi, "%p %s %s+0x%x %s\n", p->addr, kprobe_type,
+ sym, offset, (modname ? modname : " "));
+ else
+ seq_printf(pi, "%p %s %p\n", p->addr, kprobe_type, p->addr);
+}
+
+void __kprobes *kprobe_seq_start(struct seq_file *f, loff_t *pos)
+{
+ return (*pos < KPROBE_TABLE_SIZE) ? pos : NULL;
+}
+
+void __kprobes *kprobe_seq_next(struct seq_file *f, void *v, loff_t *pos)
+{
+ (*pos)++;
+ if (*pos >= KPROBE_TABLE_SIZE)
+ return NULL;
+ return pos;
+}
+
+void __kprobes kprobe_seq_stop(struct seq_file *f, void *v)
+{
+ /* Nothing to do */
+}
+
+int __kprobes show_kprobe_addr(struct seq_file *pi, void *v)
+{
+ struct hlist_head *head;
+ struct hlist_node *node;
+ struct kprobe *p, *kp;
+ const char *sym = NULL;
+ unsigned int i = *(loff_t *) v;
+ unsigned long size, offset = 0;
+ char *modname, namebuf[128];
+
+ head = &kprobe_table[i];
+ preempt_disable();
+ hlist_for_each_entry_rcu(p, node, head, hlist) {
+ sym = kallsyms_lookup((unsigned long)p->addr, &size,
+ &offset, &modname, namebuf);
+ if (p->pre_handler == aggr_pre_handler) {
+ list_for_each_entry_rcu(kp, &p->list, list)
+ report_probe(pi, kp, sym, offset, modname);
+ } else
+ report_probe(pi, p, sym, offset, modname);
+ }
+ preempt_enable();
+ return 0;
+}
+
+struct seq_operations kprobes_seq_ops = {
+ .start = kprobe_seq_start,
+ .next = kprobe_seq_next,
+ .stop = kprobe_seq_stop,
+ .show = show_kprobe_addr
+};
+
+static int __kprobes kprobes_open(struct inode *inode, struct file *filp)
+{
+ return seq_open(filp, &kprobes_seq_ops);
+}
+
+static struct file_operations debugfs_kprobes_operations = {
+ .open = kprobes_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static int __kprobes debugfs_kprobe_init(void)
+{
+ struct dentry *dir, *file;
+
+ dir = debugfs_create_dir("kprobes", NULL);
+ if (!dir)
+ return -ENOMEM;
+
+ file = debugfs_create_file("list", 0444, dir , 0 ,
+ &debugfs_kprobes_operations);
+ if (!file) {
+ debugfs_remove(dir);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+module_init(debugfs_kprobe_init);
+#endif /* CONFIG_DEBUG_FS */
+
__initcall(init_kprobes);

EXPORT_SYMBOL_GPL(register_kprobe);
\
 
 \ /
  Last update: 2007-02-08 12:49    [from the cache]
©2003-2011 Jasper Spaans