lkml.org 
[lkml]   [2007]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Writing performance problem with SAS1068
Bernardo Innocenti wrote:
> Hello,
>
> I've stumbled onto a strange performance problem on a new server:
> reading from disks is fast (70-80MB/s), but writing is extremely
> slow (13-15MB/s). I've measured it like this:
>
> dd if=/dev/zero of=/dev/sdd bs=4096 count=65536 conv=fdatasync
> 65536+0 records in
> 65536+0 records out
> 268435456 bytes (268 MB) copied, 17.7004 seconds, 15.2 MB/s

# dd if=/dev/zero of=/dev/sdj bs=4096 count=65536 conv=fdatasync
65536+0 records in
65536+0 records out
268435456 bytes (268 MB) copied, 2.24953 seconds, 119 MB/s

# dd if=/dev/zero of=/dev/sdd bs=4096 count=65536 conv=fdatasync
65536+0 records in
65536+0 records out
268435456 bytes (268 MB) copied, 2.3246 seconds, 115 MB/s

Both /dev/sdj and /dev/sdd connect via an expander to the same
SAS disk. /dev/sdj is via the LT aic94xx driver and a PCI-X HBA.
/dev/sdd is via the mptsas driver and a SAS1068 (PCIe) based HBA.
The kernel version is 2.6.20-rc5.

Looks good to me.

You may like to check that Write Cache Enable is on with:
'sdparm --get=WCE /dev/sdd'.

Doug Gilbert

> *but*: if I rebuild the kernel and change CONFIG_FUSION_MAX_SGE
> from 40 (Fedora's default) to 128 (maximum value), it suddenly
> gets much faster: 31MB/s!
>
> Looks very much like an interrupt problem to me. Maybe
> increasing the scatter gather mitigates the problem of
> missing completion notifications.
>
> Evidence:
>
> Exhibit A: custom kernel config for 2.6.18-1.2257.fc5.bernie
> http://www.codewiz.org/helium_logs/config
>
> Exhibit B: dmesg output from said kernel
> http://www.codewiz.org/helium_logs/dmesg
>
> Exhibit C: misc proc files, and all that
> http://www.codewiz.org/helium_logs/
>
> Exhibit D: motherboard and chipset specification
> http://www.supermicro.com/products/motherboard/Xeon3000/3010/PDSME+.cfm
>
>
> Circumstantial evidence:
>
> - Seems to affect just the LSI SAS1068 PCI-X controller.
> The on-board AHCI controller writes very fast (>60MB/s)
>
> - I've seen a very similar writing bottleneck with a
> Promise TX4 SATA controller (not PCI-X) on a server with
> a similar motherboard (Supermicro with Mukilteo 3000).
>
> - Passing mpt_msi_enable=1 doesn't change anything
>
> - FreeBSD 6.2 is even slower: writes at 7MB/s
>
> - OpenSolaris is much, much slower... less than 1MB/s.
>
> - Windows Vista (rc something) writes at 90MB/s. Too
> fast to believe, maybe dd from Cygwin is misbehaving.
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2007-02-06 20:29    [W:0.037 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site