Messages in this thread |  | | Date | Tue, 6 Feb 2007 16:56:40 +0400 | From | "Manu Abraham" <> | Subject | Re: 2.6.20 PCI Cannot allocate resource region 2 |
| |
On 2/6/07, Manu Abraham <abraham.manu@gmail.com> wrote: > On 2/6/07, Manu Abraham <abraham.manu@gmail.com> wrote: > > On 2/6/07, Luming Yu <luming.yu@gmail.com> wrote: > > > > dang ! > > > > > > > > rebooted it into 2.6.17.7 > > > > > > > > no errors, during a bootup, BIST isn't running anymore > > > > running M$ did change the status from dead to alive ??? shocked !! > > > > > > Interesting! does windows driver fixes the broken firmware/flash on this card? > > > > > > No firmware/flash on the card. > > > > > > > > > > > > > > > attached lspci output in the very same setup as earlier, no difference > > > > in anything, except that it was rebooted into windows. > > > > > > > > the PCI config dump would help ? > > > > > > > > > > I guess you would never reproduce this issue again unless you can > > > restore the broken firmware/flash on this card. :-) > > > > > > > none on the card, a flash or a firmware .. it has a 24c02 EEPROM for > > vendor information, that's all > > > > You can see the same from this picture
http://abraham.manu.googlepages.com/p3130016.jpg
> > regards, > manu > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |